jeffb Posted February 27, 2017 Posted February 27, 2017 the guy put some moldings on it..but he copied everything else http://www.ebay.com/itm/73-el-camino-classic-resin-body-/272570266282?hash=item3f767432aa:g:1xEAAOSwWxNYoIqg
plastic trucker Posted February 27, 2017 Posted February 27, 2017 What would happen if a person would ask him if that is a copy of someone elses work in the ask a question section?
64SS350 Posted February 27, 2017 Posted February 27, 2017 Beware of his castings, I bought a couple to check out his work, since they were going pretty cheap, boy are they ever!
jeffb Posted February 27, 2017 Author Posted February 27, 2017 ive already emailed him...he thanked me for purchasing from him..he didnt even copy the whole kit, and has a buy it now of 80.00 15.00 more than i charge. his name is john, from medway ohio...if you know him, tell him thanks for stealing..i have...
jeffb Posted February 27, 2017 Author Posted February 27, 2017 he says he has over 70" rare and one of a kind" masters hes doing.. resin casters beware
jeffb Posted February 27, 2017 Author Posted February 27, 2017 last email from him.. New message from: redlinerestorations2015-8 (604) Didn't steel BLAH_BLAH_BLAH_BLAH I remastered your junk and there's no law saying I couldn't as long as it's changed by 15 percent I do quality body's so you do what you got to you won't hurt me any
George Bojaciuk Posted February 27, 2017 Posted February 27, 2017 (edited) Jeff,Won't stop me from buying one from you! Let me make sure I don't already have one!update: I do not have one! I'm interested. Edited February 27, 2017 by George Bojaciuk
Tom Geiger Posted February 27, 2017 Posted February 27, 2017 What would happen if a person would ask him if that is a copy of someone elses work in the ask a question section?Probably block you! Check out his feedback. Someone left him a positive and said, "Low quality but for the price its OK". He responded by blocking them!Jeff, report him to eBay for copying your product.
espo Posted February 27, 2017 Posted February 27, 2017 the guy put some moldings on it..but he copied everything else http://www.ebay.com/itm/73-el-camino-classic-resin-body-/272570266282?hash=item3f767432aa:g:1xEAAOSwWxNYoIqgIs there anyway that Ebay would help you on this. Ya I know what was I thinking.
futurattraction Posted February 27, 2017 Posted February 27, 2017 Report him to eBay. I had somebody who copied my Fairmont body and had sold three or four on there. I reported him and I haven't seen any more show up since then. Best wishes. Scott
Ron Hamilton Posted February 27, 2017 Posted February 27, 2017 I do not see how anyone will do any business with him. The price from you is for an entire transkit, and is quite reasonable, and the quality is good. If and when I want a product offered by your company, I will only deal with you. I would not want it with the "Conquista" mouldings any way. Also, just adding those is not 15% of the work.
BDSchindler Posted March 1, 2017 Posted March 1, 2017 last email from him.. New message from: redlinerestorations2015-8 (604) Didn't steel BLAH_BLAH_BLAH_BLAH I remastered your junk and there's no law saying I couldn't as long as it's changed by 15 percent I do quality body's so you do what you got to you won't hurt me any Jeff...first off, I am not a lawyer but to me that is an admission of guilt in that he remastered your original work without your permission. In essence, he admits to copying your product. Use it when you contact ebay. Second...seriously contact eBay and get yourself setup in the Vero program. It doesn't cost anything but establishes your products on eBay as being yours. I reviewed a 1/24th scale Danbury Mint 41 Cadillac for my column in the mis-managed The Car Room Magazine. A couple of years later, I sold it on ebay for around $700. In the Auction, I copied the article as as I had submitted it including my name. Many people knew me through the Magazine as well as many diecast forums. The day it ended, some "Richard Cranium" in California ran an auction for the very same model and used my auction word for word to include using my name as him writing the article. While Ebay drug their feet at first, I persisted that they do something. Since my column included my face picture, I had to send them a copy of Maryland Drivers License (minus the number) and a copy of the printed article. I sent them the entire magazine (I had several copies as the owner of the mismanaged magazine apparently had way more printed than there were subscribers!). Ebay ended up shutting down the auction, notified all bidders that the seller was committing fraud and because of the uniqueness of the original auction (mine), removed the seller from Ebay. I also posted it on every diecast forum I could find
peteski Posted March 1, 2017 Posted March 1, 2017 Is there really some law out there which makes it legal for someone to use somebody else's work as long as there is 15% difference (however that could be measured)? That doesn't seem reasonable.
George Bojaciuk Posted March 2, 2017 Posted March 2, 2017 China did do it. I also believe Europe does not have a licensing agreement with the US.
Paul Hettick Posted March 2, 2017 Posted March 2, 2017 the Vero program is good to know about. Want to start selling my 63 Squire kits but have been afraid of thieves.
George Bojaciuk Posted March 2, 2017 Posted March 2, 2017 Forums like this alert us to problem vendors. I made good on my word and bought an El Camino from Jeff. You stop this stuff buy getting the word out and shutting the offender down. You turn around and buy for the "good guys". I realize many are cheap, but it serves no purpose. You get what you pay for.I found a guy in the UK selling my book on CD on eBay. I made contact with eBay UK after I started getting emails that the CD wouldn't load. I told them to complain to eBay and get a refund. It was not an auth'd copy. Guy was shut down. If you wonder how powerful these forums are....just think of the Molotow Chrome pens! A few posts, emails or articles on line and whammo...everyone is trying them. Places are carrying them..... just goes to show!
crazyjim Posted March 2, 2017 Posted March 2, 2017 Can resin kits be copyrighted? That might give casters some legal rights.Is this the same guy that's been copying Chief Joseph's items?
Ace-Garageguy Posted March 2, 2017 Posted March 2, 2017 (edited) Lotsa myths out there. Actually researching and READING the law would be a good place to start, as you'll hear as many different opinions on the web as there are posters.I have actually DONE patents and copyrights (no, you don't have to be a lawyer to do it), so I actually know something about the subject.First, though implied "copyright" exists on any original work or art piece, to get the full protection under the law, the piece must be registered. It only costs $55 to file a copyright application yourself.Second, trying to copyright a resin model of an existing car is going to be tricky, because the manufacturer of the REAL car owns the design, and the model maker has copied material that's technically not his to re-use. The big model companies have to pay licensing fees to the car companies to use the designs, and technically, a resin-caster should too.Third, most all European (and other) nations have had reciprocal patent and copyright agreements with the USA for a long time, but to get full protection, you have to register the work in question in the appropriate jurisdiction. https://en.wikipedia.org/wiki/Berne_ConventionOne more thing... the "15% percent-change-to-be-able-to-copy rule" is entirely BS. I've been hearing variations of this belief ever since I started making real aftermarket parts almost 40 years ago. No such rule or law exists, and copying somebody else's work is copying somebody else's work, but the actual application of copyright LAW to a particular instance would have to be determined by a court action...and that gets expensive pretty quickly.The excerpt below is taken from this site regarding the copying of jewelry: http://www.jewelersresource.com/Business/Studio/Copyright.html"When is a copy an infringement?The standard for infringement is that the piece is substantially similar and, of course, that the infringer copied the piece. There is no hard and fast standard of substantial similarity, but if the piece looks the same, even though it is not identical, it probably infringes (the rumors that it has to be 10% different are wrong: if the Mona Lisa were copyrighted, and you copied only the eyes and smile, it probably would still be infringement). A copyright lawyer should be consulted before any charges of infringement are made." Edited March 2, 2017 by Ace-Garageguy
Can-Con Posted March 2, 2017 Posted March 2, 2017 If you wonder how powerful these forums are....just think of the Molotow Chrome pens! A few posts, emails or articles on line and whammo...everyone is trying them. Places are carrying them..... just goes to show! You got that right George. My "plastic spoon test" idea was printed in S.A. over a decade ago. It's so common now that it's like it always existed from day-one of model building. Word gets around ,, and fast these days with computers and forums like this one.
crazyjim Posted March 2, 2017 Posted March 2, 2017 Holy cow Steve. You're the guy who came up with spoon test for paint? Amazing. I use them all the time. I acquired a very nice supply from Taco Bell last year.
Can-Con Posted March 2, 2017 Posted March 2, 2017 (edited) Holy cow Steve. You're the guy who came up with spoon test for paint? Amazing. I use them all the time. I acquired a very nice supply from Taco Bell last year. As far as I can tell anyway. I didn't get the idea from anyone and I don't remember hearing of anyone doing it before SA printed it in their tips and tech section. But anyway, I don't want to get too off subject, just needed to get that out. Edited March 2, 2017 by Can-Con
Xingu Posted March 2, 2017 Posted March 2, 2017 You got that right George. My "plastic spoon test" idea was printed in S.A. over a decade ago. It's so common now that it's like it always existed from day-one of model building. Word gets around ,, and fast these days with computers and forums like this one. I use spoons 15% larger and call it the Xingu method of checking paint compatibility.
crazyjim Posted March 2, 2017 Posted March 2, 2017 Much easier to say spoon test although your description does sound exotic.
jeffb Posted March 4, 2017 Author Posted March 4, 2017 so this is the latest email i got.. New message from: redlinerestorations2015-8 (611) Now I'm going to sell mine dirt cheap ,just to do it have fun selling on ebay
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now