Perspective Customs Posted September 16, 2017 Share Posted September 16, 2017 I bought the Foose Eldorod from my local hobby shop and like others the windshield frame was slightly bent. No worries. I am going to use the roof and trunk lid from the AMT '51 Bel Air to bring the Caddy closer to stock with some custom touches. The problem is the Chevy and Caddy body dimensions are slighty off even though they are both listed as 1/25 scale. The good thing is the Chevy roof and trunk lid do fit the Caddy body somewhat. Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted September 16, 2017 Author Share Posted September 16, 2017 Here's a mock up the roof. The trunk lid on the Caddy hasn't been cut out yet. Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted September 16, 2017 Author Share Posted September 16, 2017 (edited) Just need to figure out what to do with the gap between the hood and windshield since the Foose hood was apparently sectioned. Any suggestions? Edited September 16, 2017 by Perspective Customs Quote Link to comment Share on other sites More sharing options...
blunc Posted September 16, 2017 Share Posted September 16, 2017 those are nice looking wheels/tires, are they diecast? Quote Link to comment Share on other sites More sharing options...
blunc Posted September 16, 2017 Share Posted September 16, 2017 Just need to figure out what to do with the gap between the hood and windshield since the Foose hood was apparently sectioned. Any suggestions? I suggest modifying the lower edge of the windshield to match the foose hood and remove/clean up the wipers then add them later. Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted September 16, 2017 Author Share Posted September 16, 2017 Yes Mike, the wheels are from a Welly '53 Eldorado. Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted September 16, 2017 Author Share Posted September 16, 2017 I suggest modifying the lower edge of the windshield to match the foose hood and remove/clean up the wipers then add them later.Thanks Mike. That may be the way to go. I'd then have to extend the top edge of the fenders to meet the hood. Quote Link to comment Share on other sites More sharing options...
DrKerry Posted September 16, 2017 Share Posted September 16, 2017 Also the roof can settle down inside the body a tad more and that will close that gap a little too. Quote Link to comment Share on other sites More sharing options...
blunc Posted September 16, 2017 Share Posted September 16, 2017 Also the roof can settle down inside the body a tad more and that will close that gap a little too. I agree on this, adjust the 51 roof unit down and forward a little bit to maintain the front door edge line. Quote Link to comment Share on other sites More sharing options...
PARTSMARTY Posted September 17, 2017 Share Posted September 17, 2017 This will be very cool !!! Quote Link to comment Share on other sites More sharing options...
espo Posted September 17, 2017 Share Posted September 17, 2017 I like your roof idea and plan to watch what all you do with this build. While minor at this point I hope to see you do something with the shape of the windshield opening on the transplanted roof. I'm thinking of the windshield mounting on the sides and top, they seem very heavy looking. Quote Link to comment Share on other sites More sharing options...
peekay Posted September 17, 2017 Share Posted September 17, 2017 I really like where this is going. Quote Link to comment Share on other sites More sharing options...
Deathgoblin Posted September 17, 2017 Share Posted September 17, 2017 I like the shape of the roof on this. I'll be watching this one. Quote Link to comment Share on other sites More sharing options...
Lovefordgalaxie Posted September 17, 2017 Share Posted September 17, 2017 Reversing Foose's damage to the car, is always welcome. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted September 18, 2017 Share Posted September 18, 2017 Looks a lot better already!I know that "if" I ever bought one of these, a "de-foosification" would be an absolute must. Steve Quote Link to comment Share on other sites More sharing options...
Roadrunner Posted September 18, 2017 Share Posted September 18, 2017 Reversing Foose's damage to the car, is always welcome. Agreed. I've been hesitant to by any of the Foosemobiles, unless I know for an absolute fact that stock parts are also in the kit. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted September 18, 2017 Share Posted September 18, 2017 How would the Chevy hood match up with the Caddy body? Quote Link to comment Share on other sites More sharing options...
Lovefordgalaxie Posted September 18, 2017 Share Posted September 18, 2017 Agreed. I've been hesitant to by any of the Foosemobiles, unless I know for an absolute fact that stock parts are also in the kit. Yes, talk about bad taste. I guess there is a lot of people that want to be different, and having more money than brains, keep guys like Foose on business. I have nothing against him, as I don't know the guy, but I really dislike his "work". I mean, that hideous '56 Chevy he built for Titus, that thing is UGLY. He ruined the car. I watched almost all episodes of Overhaulin', and the only Foose built I likes was a early Bronco he built close to stock. Let's put it this way: If he depended on me to make a living, he would starve. Quote Link to comment Share on other sites More sharing options...
blunc Posted September 18, 2017 Share Posted September 18, 2017 Some original car designs are great, some aren't.Some custom cars are great, some aren't.Fortunately, there's things out there for everyone to like (and dislike). Quote Link to comment Share on other sites More sharing options...
blunc Posted September 18, 2017 Share Posted September 18, 2017 How would the Chevy hood match up with the Caddy body? I think the Chevy hood would be too short and not wide enough, but it's only plastic and if the Pyro Auburn kit can be made to look good (with enough work) then getting the Chevy hood to fit the Caddy shouldn't be as hard as fixing all the problems with the Auburn kit. Quote Link to comment Share on other sites More sharing options...
curt raitz Posted September 18, 2017 Share Posted September 18, 2017 Hey Mike...wrong scale, this model isn't 1/32nd I like it... I picked up the "Foose Caddie", ya need an extra body? I'm going to use everything else under a 1965 Pontiac Bonneville. I need to build a custom for the model car contest at the California Custom Car Show in Santa Maria next May. c'ya in April. Quote Link to comment Share on other sites More sharing options...
blunc Posted September 18, 2017 Share Posted September 18, 2017 Hey Mike...wrong scale, this model isn't 1/32nd I like it... I picked up the "Foose Caddie", ya need an extra body? I'm going to use everything else under a 1965 Pontiac Bonneville. I need to build a custom for the model car contest at the California Custom Car Show in Santa Maria next May. c'ya in April. Hey Curt, the Auburn isn't 1/32 scale, check out this thread for a little eye-candy proof: http://www.modelcarsmag.com/forums/topic/125494-1935-auburn-speedster-the-abysmal-lindbergpyro-kit-completely-reworked/?page=1 Looking forward to DSC14 Quote Link to comment Share on other sites More sharing options...
Art Anderson Posted September 18, 2017 Share Posted September 18, 2017 Chevy and Cadillac in 1949--two different cars, two different body series. While the major styling themes are very similar, Chevrolet used GM's A Body back then, while Cadillac used the GM C-body (which was longer and wider, with some curves and major contours being rather different. Fortunately, when we modelers do such conversions, "Plastic Surgery" can be relatively easy--no torches, no welding of sheet metal.Art Quote Link to comment Share on other sites More sharing options...
Lanny Haas Posted September 18, 2017 Share Posted September 18, 2017 Very interesting, what area we doing for a grill Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted September 19, 2017 Share Posted September 19, 2017 Jay, you should take Curt up on his offer at least for the hood. You could thicken the hood by cutting out the top of one and gluing it as a second layer over the other, then bevel/putty the edges down to blend them in, leaving the center thicker to align with the cowl/windshield. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.