Fully detailed Pagani Huayra..Under Glass

[Dann Tier]

Thanks, guys!!…….she is sooo klose!!!

[Dann Tier]

[Bennyg]

Looks like you’ve solved the fit issues.

 

Ben

[afx]

Brilliant work here my friend.

[Dann Tier]

10 hours ago, Bennyg said:

Looks like you’ve solved the fit issues.

 

Ben

Thanks, bud!.....i'm 99.9 % sure I have!!

[Dann Tier]

8 hours ago, afx said:

Brilliant work here my friend.

Thanks a lot, bud!!

[Ich_Will]

13 hours ago, Dann Tier said:

This!!!!  OMG ? 

[Dann Tier]

4 hours ago, Ich_Will said:

This!!!!  OMG ? 

LOL!!…..Its a BEAST, isn't it?!!!

[Dann Tier]

Hey, everyone!, I just wanted to share my "Finishing List". Whenever i'm hours away from finishing a build, I look over the whole thing, and make a list to make sure I have everything done that I had planned. Here is the Pagani's list (I know it seems like a lot, but it really isn't, and i'm already working on it.)

[Dann Tier]

-Photo 1; In order to make sure that the hinges worked freely, I carefully scraped them down to bare plastic, then painted them by brush with Tamiya's Chrome Silver. The hinges on most of these cars are gloss black, but I wanted to have mine as a better accent. 

-Photo 2; If you look carefully, you can see 4 tiny chrome rings that I added to these door-sill parts. They are self adhesive metal transfers. Since these are for the locating pins on the doors and cowls, I had to drill them out first......they have been painted CF black since.

-Photo 3; I came up with a really effective way to replicate the LED fog lamps. To all who know me, you wont be surprised that I masked these parts off too...lol, brush-painted them with XF-84, peeled the tape away, and then painted flat white across the length of the back sides....wait til I post photos of them installed!!….they really look the part!!

[Tommy124]

On 10.11.2018 at 1:39 PM, Dann Tier said:

then painted them by brush with Tamiya's Chrome Silver.

 

On 10.11.2018 at 1:39 PM, Dann Tier said:

brush-painted them with XF-84

Brush painting all the way... Do we need to be worried??

[Bennyg]

Wow! I’ve got a yellow LaFerrari and Porsche 959 on the bench. The pagans is in my stash, and this will be my guide when I start it.

Ben

 

 

[Italianhorses]

Getting close!

[Dann Tier]

8 hours ago, Tommy124 said:

 

Brush painting all the way... Do we need to be worried??

LOL!....maybe!!…..i'm not use to it...lol

[Dann Tier]

6 hours ago, Bennyg said:

Wow! I’ve got a yellow LaFerrari and Porsche 959 on the bench. The pagans is in my stash, and this will be my guide when I start it.

Ben

 

 

Thanks, Ben!!…...the next Porsche I will be doing soon, is my Tamiya 959 as well, lol, but i'm gluing the hood down....its gonna be a curbside!

[Dann Tier]

2 hours ago, Italianhorses said:

Getting close!

Yes it is, Alex!!…...I've actually got half of that list done now, and in a few minutes, I will be cracking-on with it again!

[FabbricaP]

Looking awesome!

[Dann Tier]

3 hours ago, FabbricaP said:

Looking awesome!

Thanks, Jason!!….I will have a lot to post soon!

[Dann Tier]

I had to remake all the cowl-catches since the first ones were a bit too big......heres how I did it;

[Dann Tier]

[Jason Sheer]

Wow * a Billion! Dann, this build is so slick ! You should send a message to Aoshima saying, “this is how the box art 4 this kit IS supposed to look like,” DT out!  What purple did you use for exhaust? Hoping 2 get back to my kits soon! Here’s a couple of picks of the poor kit in the corner of window jam. 

[Dann Tier]

…...and some more....

-Photo 1; I SB the two allignement pins for the door....

-Photo 2; To replicate the door-release toggles, I took super fine wire, dipped the end in super glue, which made the proper shape, then painted them chrome silver....

-Photo 3; these are the toggles.....before I glued them in place, I scraped the wire klean from paint.

-Photos 4,5,&6; The finished doors with the new SB details!

-Photo 10; Here you can see one of the new SB cowl catches. Notice also, I needed to make the door catches smaller as well.

-Photo 11; the heat shield was added.

-Photo 12; the doors are permanently on, and fit great as you can see!!

-Photo 13; It was finally okay for me to tape the exhaust pipes together, and to glue the collector on.

-Photo 14; I taped the rear cowl down in the proper position, then glued the belly-pan contact, and let it set for a while.

-Photo 15; After the lower contact dried, I taped the bumper to the tyres so that it wouldn't move when I took the cowl off. It was then that I carefully flexed back the top contacts that I SB over the drive axels, and glued them down.....it worked a treat! Also in this photo, you can see the air ducts? that I replicated.....the toothpick points to them.

-Photo 22; Here, i'm pointing at the micro magnets that will be use on both cowls, to finalise the fitments. As you can see with the front cowl for example, the strap-ends are a bit high, so I will be drilling, and setting the one magnet down a bit, til everything fits properly......same type of deal with the rear cowl.

[Dann Tier]

25 minutes ago, Jason Sheer said:

Wow * a Billion! Dann, this build is so slick ! You should send a message to Aoshima saying, “this is how the box art 4 this kit IS supposed to look like,” DT out!  What purple did you use for exhaust? Hoping 2 get back to my kits soon! Here’s a couple of picks of the poor kit in the corner of window jam. 

Thanks, Jason!, WOW!!….you got a lot going on there!!…..hope you get back to that Porsche soon!!!....my ALL-TIME favorite German car!!!  

[Bennyg]

Very nice!

Ben.

[Dann Tier]

6 hours ago, Bennyg said:

Very nice!

Ben.

Thanks a lot, Ben!!….glad you're liking it!