thatz4u Posted June 8, 2019 Share Posted June 8, 2019 this kit had soooo many extra parts that I refilled my pick up parts box.... 1 Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted June 9, 2019 Share Posted June 9, 2019 On 12/28/2018 at 9:01 PM, leafsprings said: Flaresides did not come with side moldings for obvious reasons. I started on my build, and removing the mouldings was the first thing I did. It's not too difficult, but it is not for the faint of heart, as they are thick. It is going to be a "day two" truck, with a V8 engine. The 6 is going into a 70 4x4 Custom, as a lot of them were equipped that way. Quote Link to comment Share on other sites More sharing options...
leafsprings Posted June 19, 2019 Share Posted June 19, 2019 On 6/8/2019 at 9:23 PM, Ron Hamilton said: I started on my build, and removing the mouldings was the first thing I did. It's not too difficult, but it is not for the faint of heart, as they are thick. I realize it was a cost cutting move to use one mold for everything, but I would be willing to pay more for the flareside or utility box versions without moldings. Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted June 19, 2019 Share Posted June 19, 2019 2 hours ago, leafsprings said: I realize it was a cost cutting move to use one mold for everything, but I would be willing to pay more for the flareside or utility box versions without moldings. I would rather have the mouldings be separate chrome parts. Quote Link to comment Share on other sites More sharing options...
MJStyline Posted June 21, 2019 Share Posted June 21, 2019 On 5/30/2019 at 10:29 PM, mk11 said: After taking some time this week to double check a few measurements on a 1:1 '66 F100, I offer a 'well done' to the moebius crew for their efforts on the new kit. The upper cab checks out generally on the money proportion-wise. The roof and doors look very good. There is still opportunity for some fairly easy finessing, however... The rear of the lower front fender measures 11.5" (.46) and the old amt nails it. The measurement at the front from the top of the fender to the lower crease is 17" (.68). The lower crease also marks the bottom line of the grill, making the moeb grill a little too tall but isn't really a big deal. It is in fact an almost exact copy (only better done) of the wix diecast '66 grill. The only other item worth possible modification would be the rear window width, 48" in 1:1 (1.92 in scale). I’m handy enough with a Dremel, knife, etc. but that variance in the front fender opening is a surprise and something I wold have to correct. I’m amazed an error like that squeaks through these days but am grateful for the kit... Quote Link to comment Share on other sites More sharing options...
ec9000 Posted June 21, 2019 Share Posted June 21, 2019 did moebius forget the front turn signal lens? It can be painted with a clear orange over BMF, but there is not even any engraving there, just flat, like there should have been a clear lens to go there Quote Link to comment Share on other sites More sharing options...
Mark Posted July 14, 2019 Share Posted July 14, 2019 On 5/31/2019 at 1:29 AM, mk11 said: After taking some time this week to double check a few measurements on a 1:1 '66 F100, I offer a 'well done' to the moebius crew for their efforts on the new kit. The upper cab checks out generally on the money proportion-wise. The roof and doors look very good. There is still opportunity for some fairly easy finessing, however... The rear of the lower front fender measures 11.5" (.46) and the old amt nails it. The measurement at the front from the top of the fender to the lower crease is 17" (.68). The lower crease also marks the bottom line of the grill, making the moeb grill a little too tall but isn't really a big deal. It is in fact an almost exact copy (only better done) of the wix diecast '66 grill. The only other item worth possible modification would be the rear window width, 48" in 1:1 (1.92 in scale). Did you check both sides? The AMT pickup has a fair amount of assymetry from side to side, particularly in the shape of the front wheel openings. Quote Link to comment Share on other sites More sharing options...
mk11 Posted July 14, 2019 Share Posted July 14, 2019 (edited) Aside from some slight differences, Mark, the basic amt proportions are fairly equal... I believe it's plain that AMT captured the lower fender width and the rear down-slope of the fender accent more accurately; the curve seems to flatten a bit. As well, the lower line at the front of the fender on the new kit is placed about two inches low; which along with the accent's curve, contributes to a heavy, pudgy looking front clip. The upper fender length at the top of the grill appears correct on the new one, a little longer than the amt. I will amend my comments on the grill being too tall as it is closer than I thought at first look. I'll admit to feeling that old maxim 'once bitten, twice shy' when it came to my first look at this kit. From the nadir of scale fidelity and proportion accomplished in aspects of the former series, there has been a remarkable improvement that shows well in this model. One other note about the rear window; measurement shows a 1:1 width of 50" outside the rubber and the kit window is scaled at 53". The line on the door of the new cab indicates a flirtation with the thought of transplanting the front clip/windshield frame from an old amt cab as I just like the shape a little better... haven't made up my mind yet which way I'll commence work on this Edited July 15, 2019 by mk11 Quote Link to comment Share on other sites More sharing options...
Madd Trucker Posted July 16, 2019 Share Posted July 16, 2019 was the 66 short bed issued as a kit or is it forth coming I would like to get one Quote Link to comment Share on other sites More sharing options...
thatz4u Posted July 17, 2019 Share Posted July 17, 2019 39 minutes ago, Madd Trucker said: was the 66 short bed issued as a kit or is it forth coming I would like to get one it's out already, check you local hobby shop.... Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted July 17, 2019 Share Posted July 17, 2019 55 minutes ago, Madd Trucker said: was the 66 short bed issued as a kit or is it forth coming I would like to get one It's the stepside kit that is out, other versions will follow, much like the series of 68-72 Ford pickups did. Quote Link to comment Share on other sites More sharing options...
SteveG Posted September 14, 2019 Author Share Posted September 14, 2019 Here's the fresh of the presses Box Art for the upcoming Styleside short bed version. Details on the release date are still pending but it will be released through Model King. I expect there will be at least two more versions to look forward to after this one, a long bed and a 4x4 based on the test shot parts already shown. -Steve 1 Quote Link to comment Share on other sites More sharing options...
wrenchr Posted September 14, 2019 Share Posted September 14, 2019 that is the one I cannot wait to get. I can then build a 1:1 of my 65. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted September 15, 2019 Share Posted September 15, 2019 On 9/14/2019 at 8:49 AM, SteveG said: Here's the fresh of the presses Box Art for the upcoming Styleside short bed version. Details on the release date are still pending but it will be released through Model King. I expect there will be at least two more versions to look forward to after this one, a long bed and a 4x4 based on the test shot parts already shown. -Steve be still my overexcited heart!!!!! Quote Link to comment Share on other sites More sharing options...
Luc Janssens Posted September 15, 2019 Share Posted September 15, 2019 neat! Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted September 15, 2019 Share Posted September 15, 2019 Saving my lunch money for this one, have a couple of ideas kicking around in my head. Quote Link to comment Share on other sites More sharing options...
dino246gt Posted September 20, 2019 Share Posted September 20, 2019 Our hobby shop here in Winnipeg cannot get Model King, but does carry Mobius, so can I not expect them to get the shortbed style side kit? Or is it also a regular Mobius release? Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted September 20, 2019 Share Posted September 20, 2019 Got the December issue of Collectible Automobile magazine in the mail today, there is an article on the '61-66 Ford F-series, lots of good pics.. Quote Link to comment Share on other sites More sharing options...
maxwell48098 Posted September 20, 2019 Share Posted September 20, 2019 FYI - From my time working in a Ford dealer from '65 - '72, I can attest that a 352 in a short box F100 would really haul. Quote Link to comment Share on other sites More sharing options...
Bucky Posted September 20, 2019 Share Posted September 20, 2019 Very cool box art. I'll save up for one, also. Quote Link to comment Share on other sites More sharing options...
tim boyd Posted September 21, 2019 Share Posted September 21, 2019 On 9/20/2019 at 2:07 PM, Rob Hall said: Got the December issue of Collectible Automobile magazine in the mail today, there is an article on the '61-66 Ford F-series, lots of good pics.. Agree! Yes, this is a really good, comprehensive article. I never realized there were two different sets of door sheet metal on the '61-'63 pickups.....all the detail is there in the article. Plus the full story on just how different most of the 4x4's were from the other Ford pickups those years. Quote Link to comment Share on other sites More sharing options...
leafsprings Posted September 22, 2019 Share Posted September 22, 2019 (edited) 6 hours ago, tim boyd said: Plus the full story on just how different most of the 4x4's were from the other Ford pickups those years. Yes, the 61-66 Ford pickups went thru several changes during this run, most changes ever in a Ford pickup series, both 2wd and 4wd, which IMO, why AMT only offered the '61-'63 unibody pickup. Any other body style or year model would have required a lot of new tooling. The '66 is the only year the F 100 4x4 came in the same wheelbase and body styles of the F 100 2WD Edited September 22, 2019 by leafsprings Quote Link to comment Share on other sites More sharing options...
Daf57 Posted October 21, 2019 Share Posted October 21, 2019 I expected this one to be along shortly after the flairside - it's certainly taking a bit longer isn't it? Anyone heard anything about the timeline on getting pre-order info? Thanks! Quote Link to comment Share on other sites More sharing options...
ewetwo Posted October 21, 2019 Share Posted October 21, 2019 Nice. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted December 4, 2019 Share Posted December 4, 2019 ANY news about the Styleside pickups yet???? On 9/14/2019 at 8:49 AM, SteveG said: Here's the fresh of the presses Box Art for the upcoming Styleside short bed version. Details on the release date are still pending but it will be released through Model King. I expect there will be at least two more versions to look forward to after this one, a long bed and a 4x4 based on the test shot parts already shown. -Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.