stavanzer Posted May 19, 2019 Posted May 19, 2019 I hope the kit is the LWB that Revell showed earlier. I have the Italeri Kit in both forms, and of course, like all Landrover fans, I lust for the Legendary Monogram SWB Kit. I know that the Monogram kit will never be seen again (Does Atlantis Models have it! I'd love to ask). I place my new Landrover hopes in this new kit. I'm anxious to see what is in it. I know I'll be getting more than three or four on these kits.
hpiguy Posted May 19, 2019 Posted May 19, 2019 Is there any more info other than just a pic I saw in a Revell email? It had a link to sign up for something on the Germany site but it never revealed any more info about the kit that I could see or translate.
Mike999 Posted May 19, 2019 Posted May 19, 2019 No photos of the actual kit yet that I could find. The ONLY pic I've seen is the one of the real Land Rover with the roof rack. Several non-US vendors have it available for pre-order. But only one vendor, Spot Model, is showing a release date: October 14, 2019 https://www.spotmodel.com/product_info.php?products_id=52324&language=en
440 Dakota Posted May 20, 2019 Posted May 20, 2019 (edited) 5 hours ago, alexis said: like all Landrover fans, I lust for the Legendary Monogram SWB Kit. I know that the Monogram kit will never be seen again any idea why the Monogram version hasn't been reissued ?? I'm kind of hoping this might be it just hoping this will be 1/25-1/24 th scale and not some 1/35 th reissue Edited May 20, 2019 by 440 Dakota
Mike999 Posted May 20, 2019 Posted May 20, 2019 Nobody seems to know the status of the Monogram Land Rover. Link below to Chuck Most's great 2015 article about the kit. Some trivia: years ago on the internet, a guy posted that he had worked on the real Land Rover Monogram measured for that kit. He said it lived in Burbank, CA. He knew it was that Land Rover because the real vehicle had a U.S. spec carburetor, and so did the kit. The bad news, I guess, is that this can't be the Monogram kit. The Monogram kit was a short wheelbase 2-door Land Rover. All of Revell's descriptions/photos say the new one is a long wheelbase 4-door. The good news is that it isn't 1/35 scale, which is what I suspected at first. Assuming the Revell photos and descriptions are right, of course... http://chuckmost.wixsite.com/madhouse-miniatures/single-post/2015/04/07/The-Sad-and-Sordid-tale-of-Monograms-Land-Rover
High octane Posted May 20, 2019 Posted May 20, 2019 A few/several years ago I bought the ESC! LWB Land Rover and it looks like a decent kit, hopefully one of these years I'll build it.
Mike999 Posted May 20, 2019 Posted May 20, 2019 (edited) 9 hours ago, High octane said: A few/several years ago I bought the ESC! LWB Land Rover and it looks like a decent kit, hopefully one of these years I'll build it. That's a rare kit you have there. The 1/24 ESCI Land Rover with the soft top is the only one never re-issued by Italeri (yet). The other 2 were the "Paratrooper" military version with no top and the "African Safari" version with the hard top. Just a couple of years ago, Italeri upgraded its ancient 1/35 scale military Land Rover kit with some new parts: a different hard top, police lights/decals to build a Spanish "Guardia Civil" version, and even options for left or right hand steering. I keep hoping they will do that with the 1/24 kits. Italeri did upgrade their 1/24 Jeep and (ex-ESCI) Toyota BJ-44 kits with a new .50 caliber machine gun but that was quite a few years ago and the BJ-44 is Unobtainium now. A straight re-issue of their BJ-44 "Savannah Master" kit would also be great. It had a roof rack full of nice accessories: jerry cans, wooden crates, 2 spare tires and some tarps. Edited May 20, 2019 by Mike999 omit
High octane Posted May 20, 2019 Posted May 20, 2019 36 minutes ago, Mike999 said: That's a rare kit you have there. The 1/24 ESCI Land Rover with the soft top is the only one never re-issued by Italeri (yet). The other 2 were the "Paratrooper" military version with no top and the "African Safari" version with the hard top. Just a couple of years ago, Italeri upgraded its ancient 1/35 scale military Land Rover kit with some new parts: a different hard top, police lights/decals to build a Spanish "Guardia Civil" version, and even options for left or right hand steering. I keep hoping they will do that with the 1/24 kits. Italeri did upgrade their 1/24 Jeep and (ex-ESCI) Toyota BJ-44 kits with a new .50 caliber machine gun but that was quite a few years ago and the BJ-44 is Unobtainium now. A straight re-issue of their BJ-44 "Savannah Master" kit would also be great. It had a roof rack full of nice accessories: jerry cans, wooden crates, 2 spare tires and some tarps. Mike, I'm hoping to build my Land Rover into a "tour vehicle" like I rode in when in Bora Bora several years ago.
Rob Hall Posted May 20, 2019 Posted May 20, 2019 7 minutes ago, thatz4u said: or maybe this, with a little work...... That looks like the police vehicle from the TV show 'Death in Paradise'...
thatz4u Posted May 20, 2019 Posted May 20, 2019 1 minute ago, Rob Hall said: That looks like the police vehicle from the TV show 'Death in Paradise'... Bingo!!!
stavanzer Posted June 21, 2019 Author Posted June 21, 2019 The Bora-Bora and DIP Rovers look like the later Defender versions, not the older style depicted in the ECSI/Italeri kits. AFIK, the Defender had never been kitted in 1/25-1/24 scale.
dino246gt Posted June 23, 2019 Posted June 23, 2019 I have these 2 Esci kits, both curbside, but pretty cool! Also the Monogram one, which I built, I know there's supposed to be "galvanized" trim, but I just body coloured it, I narrowed the rims.
hpiguy Posted June 26, 2019 Posted June 26, 2019 (edited) They sent out a new email, no real info on the kit (all back story on the Rover still) but it does have a pre-order link now. 29.99 Euros Kit #07047 105 parts 185mm long Coming out in Europe, Sept 2019. https://www.revell.de/produkte/modellbau/autos/young-oldtimer/land-rover-series-iii.html?utm_source=discoverrevell&utm_medium=teil-1&utm_campaign=landrover Edited June 26, 2019 by hpiguy
mikemodeler Posted June 26, 2019 Posted June 26, 2019 18 hours ago, mk11 said: I want one of these Would love to find a kit of one of these a bit more reasonably priced. I drove one of these in high school working at the Mercedes/BMW dealer, we used it to pull cars in from the back lot and run errands. Never worried about getting a speeding ticket, but it had no problem going thru snow or mud!
Mike999 Posted June 30, 2019 Posted June 30, 2019 Inspiration! Nick Nolte's ride in the 1978 movie "Who'll Stop the Rain." ImcdB identifies this one as a 1958 Land-Rover 109'' LWB Series II Station Wagon. I think all available 1/24 kits are Series III. But I don't know much about Land Rovers, and identify them as "headlights inside the fenders" (Series II) or "headlights on the fenders" (Series III).
89AKurt Posted July 1, 2019 Posted July 1, 2019 I built what might have been the Monogram, for somebody, a long time ago. I whipped it together, painted tiger stripes on it, fun quickie.
Exotics_Builder Posted July 1, 2019 Posted July 1, 2019 Revell has started a sie on the development of the kit. Use Google translate to convert to English https://discover.revell.de/
Tom Geiger Posted July 1, 2019 Posted July 1, 2019 I'm another guy who would like to see that Monogram Land Rover released again. I've seen it built up, but I've never owned one myself. The examples I've seen have all been over $100. Now If I wanted to take a hit for the team, I would buy one of these. That would instantly result in the kit being reissued! Here's the three that pop up on an eBay search: IF Revell has this tooling, it would make sense to release it as a Revell of Germany kit. I'm sure the rest of the world would be more apt to buy this than the US market.
paul alflen Posted July 1, 2019 Posted July 1, 2019 Was this a re-boxed ESCi kit, for monogram????///
Luc Janssens Posted July 1, 2019 Posted July 1, 2019 1 hour ago, paul alflen said: Was this a re-boxed ESCi kit, for monogram????/// Nope Monogram engineered. The kit tanked big time, therefore never re-released.
niteowl7710 Posted July 1, 2019 Posted July 1, 2019 Every substantial rumor about that Monogram Land Rover is that the tooling doesn't exist for it anymore, and versions of that tale I've heard have it sourced to Monogram employees from that time. If it existed you'd think it would be reissued to compliment the new kit.
paul alflen Posted July 2, 2019 Posted July 2, 2019 Thank you Luc Janssens for that clarification!!!!!
Goose1957 Posted July 2, 2019 Posted July 2, 2019 This is the one I want released. Not sure what model it is, but I want to do a diorama with it, lol. From the movie The Gods Must Be Crazy . Jeff
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now