Lowlife ! ! Posted June 24, 2020 Share Posted June 24, 2020 Wow , every single piece is so meticulously fitted ! The pic of the radius rod looked like a pic of the real thing till I noticed the grey primer ! Great thread there's a lesson for everyone reading this ! Quote Link to comment Share on other sites More sharing options...
Codi Posted June 24, 2020 Share Posted June 24, 2020 Mad skills Mark. Taking an end-mill to the manifold..........well, that had to be interesting to say the least. Nicely done of course. Keep sharing the steps / processes you're doing along the way, they're greatly appreciated. cheers, tim Quote Link to comment Share on other sites More sharing options...
Eric Macleod Posted June 25, 2020 Share Posted June 25, 2020 I am just seeing this thread for the first time. Your work is jaw dropping. I'll certainly be watching this with interest. Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted June 25, 2020 Share Posted June 25, 2020 incredible as always! Quote Link to comment Share on other sites More sharing options...
Justin Porter Posted June 25, 2020 Share Posted June 25, 2020 I am beyond astonished at what I've been seeing as I started this thread and read through to this point. Every addition and tweak and correction is so plain and logical, based 100% on the thought "this part doesn't look like a real part" and the results are amazing. Quote Link to comment Share on other sites More sharing options...
peteski Posted June 26, 2020 Share Posted June 26, 2020 On 6/25/2020 at 12:25 AM, Eric Macleod said: I am just seeing this thread for the first time. Your work is jaw dropping. I'll certainly be watching this with interest. If in the past you never looked into the "Big Boys" section, you would have missed it. Now that moderators merged large scale model section into this general WIP section, it exposed it to the general population of the forum. Personally I preferred to keep "big boys" in a separate section, it is what it is. Quote Link to comment Share on other sites More sharing options...
65slotcar Posted June 26, 2020 Share Posted June 26, 2020 awesome detail ! would love to have a set of those aluminum wheel rings. i have the Aston Martin version waiting to be built. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted July 22, 2020 Author Share Posted July 22, 2020 Thanks Guys!! Built up the rear suspension rods and ends, and they work with the rest of the moving suspension parts. Steel rods, cast resin joints made from 3D printed masters I designed and grew and brass pivot points. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted July 25, 2020 Author Share Posted July 25, 2020 Made new lower control arms from steel and cast resin ends. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted July 26, 2020 Author Share Posted July 26, 2020 I'm guessing the oval hole in the engine cover is a carry-over from the first issue for the power switch for the motor and lights. They provide a plug, but it needs to be faired in. Quote Link to comment Share on other sites More sharing options...
Codi Posted July 26, 2020 Share Posted July 26, 2020 Just a big ol' smile on my face of this post.....you nailed those (of course) 100%. Just 1 question Mark, how strong are the resin joints? I know you mentioned the brass inserts so they're most for the visual? The latest pic also shares that nice clean finish to the spoiler. A a lot of work and attention went into that as well. cheers, Tim Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted July 26, 2020 Author Share Posted July 26, 2020 Thanks Tim! The resin joints are about as strong as styrene. The brass is for strength and will not be visible in the end. Yes, the rear spoiler was a good amount of work, especially because I dropped it a couple days ago and broke one corner off and had to rebuild it. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted August 19, 2020 Author Share Posted August 19, 2020 These are the final masters for the carbs, I grew them from the 3D files I created from scratch. These are the cast resin tops. The venturi tubes are stainless steel. I used a very thin coat of primer then a thin coat of silver to see how they look. Still more fine tuning to do. These are the cast resin main bodies; same as the tops, more work to do… Quote Link to comment Share on other sites More sharing options...
CabDriver Posted August 19, 2020 Share Posted August 19, 2020 Outstanding - beautiful work! Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted September 5, 2020 Author Share Posted September 5, 2020 Thanks Jim! I designed the intake horns in SolidWorks and printed the master, then cast copies in resin. The one in the foreground is a 3D master. Quote Link to comment Share on other sites More sharing options...
CabDriver Posted September 5, 2020 Share Posted September 5, 2020 Out of interest, I notice you often print (grow) a single piece and then resin cast...what’s the benefit in resin casting multiples rather than just 3D printing more of them? I don’t know enough about 3D printing to know all the pros and cons... Quote Link to comment Share on other sites More sharing options...
Eddie Cremer Posted September 5, 2020 Share Posted September 5, 2020 On 7/2/2019 at 8:05 AM, ibj40 said: As someone who works exclusively in 1/18 scale diecast, I have to admit that this is the most amazing build I have ever witnessed. Simply outstanding. Hey there, old friend!!!! Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted September 5, 2020 Author Share Posted September 5, 2020 12 hours ago, CabDriver said: Out of interest, I notice you often print (grow) a single piece and then resin cast...what’s the benefit in resin casting multiples rather than just 3D printing more of them? I don’t know enough about 3D printing to know all the pros and cons... In this case, and most of the time I grew multiple parts. But not every part comes out the same depending on the detail and complexity so I just use the best ones. The 3D resin is very hard and brittle so I cast the copies in a more user friendly material especially when I want multiples of the same parts. Plus using one master ensures all the offspring are the same. Quote Link to comment Share on other sites More sharing options...
CabDriver Posted September 5, 2020 Share Posted September 5, 2020 2 hours ago, Scale-Master said: In this case, and most of the time I grew multiple parts. But not every part comes out the same depending on the detail and complexity so I just use the best ones. The 3D resin is very hard and brittle so I cast the copies in a more user friendly material especially when I want multiples of the same parts. Plus using one master ensures all the offspring are the same. Ahh, interesting! I had no idea - thanks for taking the time to explain Mark! Fascinating! Quote Link to comment Share on other sites More sharing options...
Reeves Racing Posted September 6, 2020 Share Posted September 6, 2020 On 9/5/2020 at 12:28 PM, Scale-Master said: In this case, and most of the time I grew multiple parts. But not every part comes out the same depending on the detail and complexity so I just use the best ones. The 3D resin is very hard and brittle so I cast the copies in a more user friendly material especially when I want multiples of the same parts. Plus using one master ensures all the offspring are the same. You're a great teacher Mark. I always appreciate your threads and the time you take to answer questions. I know some of my questions have been dumb ones but you answer mine as well as the good ones. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted September 12, 2020 Author Share Posted September 12, 2020 Thanks guys. I don't think any of your questions were dumb Mitch. The block got a new brass dipstick channel. The dipstick tube is stainless steel. And the (removable) dipstick is nickel and brass. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 12, 2020 Author Share Posted October 12, 2020 I made a new era correct timing tab to bolt onto the timing cover. I still need to add the markings. Quote Link to comment Share on other sites More sharing options...
John Teresi Posted October 12, 2020 Share Posted October 12, 2020 Mark....Amazing work!!!! Quote Link to comment Share on other sites More sharing options...
cobraman Posted October 12, 2020 Share Posted October 12, 2020 The level of detail you are able to add is just incredible. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 13, 2020 Author Share Posted October 13, 2020 Thanks John, Thanks Ray! The construction of the starter has begun. I have a real one on my bench to copy. Machined from brass and aluminum. Solenoid. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.