satterwhite78 Posted October 10, 2023 Share Posted October 10, 2023 You normally wouldn't associate Plymouth Volare with the Roadrunner nameplate but the 76 through 80 F body Plymouth were just a trim package. The 76/77 models the 318 engine came standard while the 360 came with a 2 bbl carb and single exhuast. The 78/79 models offered the 360 with a 4 bbl carb but only the 79 year model came with dual exhaust rated at 195 hp. The 80 year model and last of the lineage came with a redesign front end, the slant six 225 Cid as standard and the 318 as the only V8 option. Kudos to my daughter for getting this for me. The text she sent asked me if the Volare and a MPC Pinto wagon were rare. My reply was only w/o the Pinto but get it anyway. I borrowed a rear spoiler and rear side window louvers from a MPC Fuzzduster kit that I got from a friend. Unusual that the Fuzzduster had 3 rear spoiler, 2 stock and 1 custom, and the rear window louvers. Since the engine in the kit looked undersized( like a V6). I used the engine from a Joker Goon Monaco which fell right in. The rims were a close 2nd to the original based on a YouTube clip that I got my inspiration from. Bought Silver stripe decals from Microscale decals to custom apply to the hood, lower sides and rear panel. Used ModelMaster lacquer Hugger Orange to replicate the Spitfire Orange from the Chrysler Color chart (Sorry GM guys......not! Lol) 9 1 Quote Link to comment Share on other sites More sharing options...
karbuildr Posted October 10, 2023 Share Posted October 10, 2023 Very nice, interesting kit, looks good. Quote Link to comment Share on other sites More sharing options...
Street Rod Posted October 11, 2023 Share Posted October 11, 2023 That’s cool, great build! Quote Link to comment Share on other sites More sharing options...
michelle Posted October 11, 2023 Share Posted October 11, 2023 very nice work i wish they would have retooled the 76 dart sport kit into the 77 aspen r/t when they retooled the 76 duster kit into 77 volare roadrunner kit then did the same as the volare roadrunner kit through 1980 model year with the aspen rt 1 Quote Link to comment Share on other sites More sharing options...
charger74 Posted October 11, 2023 Share Posted October 11, 2023 It looks very good 👍🏻 Quote Link to comment Share on other sites More sharing options...
Sport Suburban Posted October 11, 2023 Share Posted October 11, 2023 Very Nice! Was this a resto or a nice kit to start with? Quote Link to comment Share on other sites More sharing options...
ncbuckeye67 Posted October 11, 2023 Share Posted October 11, 2023 That's an awesome build! And that daughter... I'd keep her if I were you (Lol). Quote Link to comment Share on other sites More sharing options...
satterwhite78 Posted October 11, 2023 Author Share Posted October 11, 2023 6 hours ago, Sport Suburban said: Very Nice! Was this a resto or a nice kit to start with? It was a opened kit that my daughter found while weekend shopping at a Thrift store. The MPC Pinto Pony Express wagon she also got was open but both kits had everything. The Volare came with a hideous "padded vinyl 1/2 top" that the previous owner had already glued on. The Volare body has the T-top molded into the roof. With his overly abundant use of tube glue application in one spot, I was able to remove the faux vinyl top but had a 1 inch diameter section that didn't want to be evicted. Saw, scrape, sand, putty, sand some more, primer, sand some more, putty again, sand even more, primer......this could go on for days ( the post) I made the decision to sand the raised T-top strips off to go with a solid roof. When I get around to the Fuzzduster I will probably go with an open T-top. Enjoy your posts immensely and do look forward to the next one. 1 hour ago, ncbuckeye67 said: That's an awesome build! And that daughter... I'd keep her if I were you (Lol). I've had her for about 35 years...she's a keeper, just like my wife of 40 years this May! Thanks for looking and comment everyone. 1 Quote Link to comment Share on other sites More sharing options...
Tom99 Posted October 11, 2023 Share Posted October 11, 2023 Nice. Quote Link to comment Share on other sites More sharing options...
ncbuckeye67 Posted October 11, 2023 Share Posted October 11, 2023 1 hour ago, satterwhite78 said: It was a opened kit that my daughter found while weekend shopping at a Thrift store. The MPC Pinto Pony Express wagon she also got was open but both kits had everything. The Volare came with a hideous "padded vinyl 1/2 top" that the previous owner had already glued on. The Volare body has the T-top molded into the roof. With his overly abundant use of tube glue application in one spot, I was able to remove the faux vinyl top but had a 1 inch diameter section that didn't want to be evicted. Saw, scrape, sand, putty, sand some more, primer, sand some more, putty again, sand even more, primer......this could go on for days ( the post) I made the decision to sand the raised T-top strips off to go with a solid roof. When I get around to the Fuzzduster I will probably go with an open T-top. Enjoy your posts immensely and do look forward to the next one. I've had her for about 35 years...she's a keeper, just like my wife of 40 years this May! Thanks for looking and comment everyone. My daughter just turned 35 in September! Quote Link to comment Share on other sites More sharing options...
drodg Posted October 11, 2023 Share Posted October 11, 2023 Nice job and I agree with Michelle I wish they would release an Aspen R/T. 1 Quote Link to comment Share on other sites More sharing options...
ChrisR Posted October 11, 2023 Share Posted October 11, 2023 Very nice. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted October 11, 2023 Share Posted October 11, 2023 nice build up, well done Quote Link to comment Share on other sites More sharing options...
happy grumpy Posted October 11, 2023 Share Posted October 11, 2023 Great job on the volare. Good idea to use the Monaco engine. Quote Link to comment Share on other sites More sharing options...
espo Posted October 11, 2023 Share Posted October 11, 2023 The 1:1 subject may have been little more than a trim option, but your build looks like it could be so much more. Strong color and well done, window coverings and just a little paint trim on the hood. The wheels look good along with some nice tires. Quote Link to comment Share on other sites More sharing options...
AMT68 Posted October 11, 2023 Share Posted October 11, 2023 The exterior color and grey striping really make it stand out. The louvered quarter windows also an excellent choice. And the grill and wheels detailed beautifully. Quote Link to comment Share on other sites More sharing options...
Lobo2me Posted October 11, 2023 Share Posted October 11, 2023 The late 70s were a real challenge for Muscle Cars. Chocked V8s coughing out less than 200hp were slowpokes compared to today's daily drivers and most of the creative designer touches did little to improve performance. All of the Big3 suffered the same fate from poor boardroom decision making. But this is a very good model and interesting subject matter. I like your paint scheme and all of the excellent details. Well done! Quote Link to comment Share on other sites More sharing options...
restoman Posted October 13, 2023 Share Posted October 13, 2023 Nice build. I did the FuzzBuster a few years ago, and had fun making it into a stock looking street warrior. I owned a '76 Runner back in '81. Silver and black with orange and grey stripes. The 360 ran pretty good for the time and place, clicking off regular mid-15s in the quarter. A spread bore intake, small valve 340 heads, a tuned Q-Jet, a mild cam, and some 2 1/4 duals made it perk up somewhat. I think it had 3.55s out back. Quote Link to comment Share on other sites More sharing options...
slusher Posted October 15, 2023 Share Posted October 15, 2023 Very sharp! Quote Link to comment Share on other sites More sharing options...
ewetwo Posted October 15, 2023 Share Posted October 15, 2023 That looks great. Quote Link to comment Share on other sites More sharing options...
Jim B Posted October 15, 2023 Share Posted October 15, 2023 Very cool. I like your changes. Quote Link to comment Share on other sites More sharing options...
catpack68 Posted October 15, 2023 Share Posted October 15, 2023 Nice work!👍Would love to see Round2 re-issue the 79 Road Runner Super Pak kit Quote Link to comment Share on other sites More sharing options...
Stew Posted February 18 Share Posted February 18 What kit did the wheels come from ? Building one of these to resemble my ‘79 I bought new, and still own, 45 years later. Thanks, Stew Quote Link to comment Share on other sites More sharing options...
JS23U Posted February 20 Share Posted February 20 Chuck, that's a wonderful build! For anyone looking for correct alloy wheels, I have them available in my shapeways-shop. https://www.shapeways.com/shops/basement-resin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.