kerc Posted May 16, 2012 Share Posted May 16, 2012 Mind blown. Quote Link to comment Share on other sites More sharing options...
ShawnS Posted May 17, 2012 Author Share Posted May 17, 2012 Thanks guys. Your work is flat out amazing. Thanks for taking the time time to share the in-progress details. I'll use this build as building techniques reference material for years to come. Thanks it's no probs. I love to read things like that, I try to share the knowledge when I can. It's good to see that others are taking something from this build too. It's time for the most recent update. Last week was all about gettng the thing sitting on it's 4 wheels. The first thing that I did was to cast the wheels and sort out which tyres I wanted to use. The wheels were originally Ford 12 slots but I drilled the slots out and put some evergreen rod to make the rings. The centre hub is scratchbuilt with aftermarket nuts.The tyres come from an old Tamiya 1980's Nissan Leopard TR-X. I then made the upper suspension arms. I took the original Mustang kit part, opened up the centre, carved out the sides to make the wings and added a few evergreen parts for effect. For the lower arms I cut the part from the Mustang kit setup and cut and reshaped it, added new sides and resin cast it as well as the upper arms. The steering knuckles were from AMT's 67 Mercury. I reshaped them and relocated the stubs and removed the thick locating pins and replaced them with bits of rod. I also made some spring cradles. All of the parts ready for assembly and assembled Next post.. On all four wheels... Quote Link to comment Share on other sites More sharing options...
ShawnS Posted May 17, 2012 Author Share Posted May 17, 2012 It doesn't sit too bad. A little bit of fine tuning and I'll be happier. That's it for now. Thanks again for your continued interest. If there is anything you need to know, feel free to ask. Cheers ShawnS Quote Link to comment Share on other sites More sharing options...
W-409 Posted May 17, 2012 Share Posted May 17, 2012 Wow this is amazing scratchbuilding. The chassis looks good and you did great job with those wheels and tires too. Body looks very sharp too, keep it going. I'm waiting for more, and taking notes. Quote Link to comment Share on other sites More sharing options...
Tony T Posted May 17, 2012 Share Posted May 17, 2012 All I can say is...WoW!! I'm amazed by this build...very cool skills exibited for us to follow along...thanks! Quote Link to comment Share on other sites More sharing options...
mopar68 Posted May 17, 2012 Share Posted May 17, 2012 Truely in love with this WIP Shawn. Apart from immensely enjoying watching this masterpiece come together, I'm learning alot of cool tricks along the way. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted May 22, 2012 Share Posted May 22, 2012 Your work is so far beyond professional that I don't have a word for it! This reminds me of the thread on developing the Moebious Hudson masters except that your work is better. Any model company would be proud to have you developing new product for them! I agree. are you a designer/model master by trade? Quote Link to comment Share on other sites More sharing options...
ShawnS Posted May 22, 2012 Author Share Posted May 22, 2012 I agree. are you a designer/model master by trade? Negative, I don't have any background in designing/manufacturing etc. I'm just a guy with a hobby and lots of ideas in his head. Besides they do it all with computers these days don't they? This model making/building thing is old school. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted May 22, 2012 Share Posted May 22, 2012 More amazing progress, and I am delighted you express your amazing styrene talent by simply calling "old school." Keep it going. Take your vitamins and keep it going, please. Quote Link to comment Share on other sites More sharing options...
Guest Darkside Customs Posted May 22, 2012 Share Posted May 22, 2012 Wow, this is truly a work of art! Quote Link to comment Share on other sites More sharing options...
Helix Posted May 25, 2012 Share Posted May 25, 2012 Outstanding work Shawn, I take my hat off to you mate ! Quote Link to comment Share on other sites More sharing options...
Bennyg Posted May 27, 2012 Share Posted May 27, 2012 Awesome progress. Loving seeing it come together. Ben Quote Link to comment Share on other sites More sharing options...
ShawnS Posted May 27, 2012 Author Share Posted May 27, 2012 Thanks guys , It's good to see some more Aussies on the forum following along with my seemingly neverending little project. This week I got a little more done to the front suspension. I made the brackets for the radius rods and mated them to the chassis. I also made the mounting brackets for the sway bar. The radius rods were glued into position onto the suspension arms and I added a threaded rod and nuts from T2M. The radius rod rubbers were cut from a piece of sprue. I also made some sections to dress up the underside of the front crossmember I made a new sway bar from aluminium rod and added some brackets. I added protech boltheads to the sway bar brackets and T2M bolts to the suspension arms. That's it for now. This week I will start work on the steering linkages. There is still some more small details to go into the area but nothing that's super important yet. Thanks again for all your kind comments. Cheers ShawnS Quote Link to comment Share on other sites More sharing options...
mopar68 Posted May 27, 2012 Share Posted May 27, 2012 And once again you leave me speechless Quote Link to comment Share on other sites More sharing options...
Tony T Posted May 27, 2012 Share Posted May 27, 2012 Fantastic! Love the details! Quote Link to comment Share on other sites More sharing options...
Helix Posted May 29, 2012 Share Posted May 29, 2012 Nice detail on the front end mate Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted May 30, 2012 Share Posted May 30, 2012 If I could do even five percent of this... Charlie Larkin Quote Link to comment Share on other sites More sharing options...
FASTBACK340 Posted May 30, 2012 Share Posted May 30, 2012 To say your scratch building is impressive is an understatement! Incredible workmanship.... absolutely incredibly. Quote Link to comment Share on other sites More sharing options...
ShawnS Posted May 30, 2012 Author Share Posted May 30, 2012 Thanks for the kind words guys. There is still plenty more to do so stay tuned. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted May 30, 2012 Share Posted May 30, 2012 Great construction continues . . . thanks for sharing, again. Quote Link to comment Share on other sites More sharing options...
Brizio Posted May 30, 2012 Share Posted May 30, 2012 Fantastic! Quote Link to comment Share on other sites More sharing options...
ShawnS Posted June 26, 2012 Author Share Posted June 26, 2012 Hi fellow builders. It's been a month since my last update so I think I should post something new. I have been working on the steering setup. I went through a lot of evergreen rod in my many attempts to get it right. I also spent some time fine tuning the parts that I had already made to make sure the work that I did on the steering fitted right. I started by removing the stabiliser bar and making a thicker one. I made it in 3 pieces for easy installation during final assembly. Then I made the steering box from everegreen rod and strip. The mounting bracket. The steering rods were made from various size evergreen rods. Here are the completed units with the pitman and idler arms. I added some boltheads after I glued it all together. In position. That's all for now. I have moved on to making the brakes and I am almost finished them so I will update you on those when I am done. Thanks for dropping by and having a look. Cheers ShawnS Quote Link to comment Share on other sites More sharing options...
sports850 Posted June 26, 2012 Share Posted June 26, 2012 Great to see another update Shawn , your work never ceases to amaze me , it just looks so realistic . Quote Link to comment Share on other sites More sharing options...
gasser59 Posted June 26, 2012 Share Posted June 26, 2012 (edited) Simply incredible scratching mate. Each post is a grand statement of your fantastic scratch-building skills. I'm on the edge of my seat for the brakes. Edited June 26, 2012 by gasser59 Quote Link to comment Share on other sites More sharing options...
Deathgoblin Posted June 26, 2012 Share Posted June 26, 2012 Incredible work. I wish I was half that talented. Can't wait to see her finished. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.