Jump to content
Model Cars Magazine Forum
Brutalform

Mel Burns 1963 FORD 300 427

Recommended Posts

The Ford 300 was only offered in 1963, and it was a low option car. Pretty much used for police and taxi service, it had no carpeting, and hardly any chrome trim. But it was offered with pretty much any engine, and it includes the 427.  So I figured the less BMF work, the easier it would be. I started this build a couple years ago. I bought decals from SMP and it’s pretty much been sitting around since then. This car will use the Starliner chassis, and engine. Also I plan on adding the Thunderbolt air intake, grabbing air from the inner headlights. 

I normally don’t enjoy working on resin, but I had to remove the side trim from the resin body. I also filled the front fender trim holes with CA glue, and sanded it down, and finished it off with some putty. Then I used some red glazing putty, which won’t attack the resin like it would styrene, to fill in the little scratches I created from the trim removal. 

I also have a resin tear drop hood, and a lightweight resin interior which will have a bench seat added. 

73210A56-E69B-4747-9938-F6689241C60C.jpeg

93F55CC0-757C-4551-86A3-4BB8CFB5F71B.jpeg

FB2E5F07-9171-42EE-90ED-88B514CD379C.jpeg

1D7D5D4E-BC97-495A-A583-00CB336E9713.jpeg

82841421-DB5A-4052-8A37-15DE20D111DA.jpeg

37A6DF03-1466-408B-A3AB-6235AC1E5097.jpeg

0714D665-F4F3-4D66-9277-FB1B9DA5E945.jpeg

7D7C6037-7D0E-4117-AADD-70FC30FAE711.jpeg

5D667C7B-CD85-4289-9400-280D6BC599F0.jpeg

Share this post


Link to post
Share on other sites

Sanded the Galaxie rear bumper trim away. This area has no trim on the 300, as it would be painted body color. 

4CDAA0A0-C66B-465F-904C-1E89ED36171B.jpeg

DE44D83A-C058-4FA4-8EAF-DF9D13B80D63.jpeg

Edited by Brutalform

Share this post


Link to post
Share on other sites

I originally had some strip styrene that I tried to scribe as straight as I could, to make a pillar post. After seeing how bad it came out, I glued some strip styrene together, side by side, to make it look more real. I’m just waiting for it to dry, so I can glue on the new posts. 

45288074-1C3D-4850-B22D-FE44A12806C2.jpeg

8AA7FEFC-DC04-4136-A256-41C6C14E4CE0.jpeg

Share this post


Link to post
Share on other sites

The strip I glued together was too thin. So I had to scribe a thicker piece to use. Glued them in, but due to this body being brittle, it seems every time I touch it, a piece of the drip rail comes off. After this dries, I’m planning on filing the repair to the drip rail down. 

89B7FEF2-4D77-48E0-83E7-CA3CF068F5D9.jpeg

Share this post


Link to post
Share on other sites

Great work so far Tom. Would like to build a 300 someday, where did you get the body?

Share this post


Link to post
Share on other sites

Some really nice modeling.  Really enjoy the ingenuity of those early racers to find ways to lose weight.

Share this post


Link to post
Share on other sites
13 hours ago, afx said:

Great work so far Tom. Would like to build a 300 someday, where did you get the body?

Thank you...The body was cast by Time Machine Resin. 

Share this post


Link to post
Share on other sites

I like it a lot.  Are you going to put a strip of styrene under the drip rails to duplicate the top of the door and rear window top strip on the sedans?

Share this post


Link to post
Share on other sites

Nice project and I will follow this closely.
I own a 1963½ Galaxie 500 XL and one thing I really don't like with the AMT kits is the much too thick tail light bezels, if you look at the picture of the real car you see how the bezels should look, they are quite slim compared to the kit part.

Share this post


Link to post
Share on other sites
15 hours ago, R. Thorne said:

I like it a lot.  Are you going to put a strip of styrene under the drip rails to duplicate the top of the door and rear window top strip on the sedans?

Yes. But right now I only have .040 plastic strips that are only .015 thick.They are a bit flimsy, and hard to cement. I’d like to run down to the LHS and grab a .020 pack. I know just cutting some of the thicker strips that I do have is an option, but I’d rather have some nice, straight, new pieces, since my cuts will look like a hack job. 

 

Share this post


Link to post
Share on other sites
24 minutes ago, Force said:

Nice project and I will follow this closely.
I own a 1963½ Galaxie 500 XL and one thing I really don't like with the AMT kits is the much too thick tail light bezels, if you look at the picture of the real car you see how the bezels should look, they are quite slim compared to the kit part.

I agree 100%. I look at some of my older Galaxie builds, and I always thought the bezels look totally wrong. 

BE80E240-51D5-4D44-9ADA-E3CE6A23F9CC.jpeg

Share this post


Link to post
Share on other sites

It upsets me to say, that this body got broken. I’m beginning to seriously dislike resin bodies. I had so much time into this body, but, I’m not going to get angry, but just going to move on. At least I have all the rest of the parts to incorporate into another 63 or 64 Galaxie build. Since I still have the decals and everything else, I might even keep my eyes open for another body, down the road. Oh well... time to move on. 

Share this post


Link to post
Share on other sites

My sympathies.  My curiousity, however, has to ask, how?  Dropped?  Nonrepairable?  Although a neophyte with resin bodies (only have 3) what problems have you experienced? 

Share this post


Link to post
Share on other sites
9 hours ago, R. Thorne said:

My sympathies.  My curiousity, however, has to ask, how?  Dropped?  Nonrepairable?  Although a neophyte with resin bodies (only have 3) what problems have you experienced? 

I was hooking up a new monitor for my computer, and when i was finished putting the screws in the back of the screen, it slipped and I jerked my arm hard enough for my elbow to push the body up against my paint rack. 

Share this post


Link to post
Share on other sites

Really hate to hear that Tom. Especially after the hard work you've been putting into this. Hope to see recovery efforts soon.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...