Steve H Posted February 15, 2023 Posted February 15, 2023 Holy smokes! You have your foot to the floor on this one! Looks great Greg, the interior is particularly nice. I like embossing powder for carpet, I think it looks “scale correct”. Is the red paint Tamiya dull red? Cheers, Steve
Steve H Posted February 15, 2023 Posted February 15, 2023 Oh… I see we use the same burnishing tools for foil work. Those pointed swabs are perfect ?. I like your idea of using tape to contain the foil “bits” , I will definitely be borrowing that one. Thanks
NOBLNG Posted February 15, 2023 Author Posted February 15, 2023 (edited) 37 minutes ago, Steve H said: Holy smokes! You have your foot to the floor on this one! Looks great Greg, the interior is particularly nice. I like embossing powder for carpet, I think it looks “scale correct”. Is the red paint Tamiya dull red? Cheers, Steve The interior paint is Premier Colonial Red from Canadian Tire, decanted and airbrushed. It was left over from my ‘41 Chevy pickup. The carpet is just a brighter red embossing powder, then flat clear over everything. I found a local craft shop that has a bunch of colours of embossing powder so I see more carpets in my future.? 33 minutes ago, Steve H said: Oh… I see we use the same burnishing tools for foil work. Those pointed swabs are perfect ?. I like your idea of using tape to contain the foil “bits” , I will definitely be borrowing that one. Thanks I use the pointed ones for setting the foil in the crease before trimming,but they are a little flimsy for burnishing. I have some nice wooden ones I got at a local electronics supplier that worked great for the foil on the wheel well trim. Edited February 15, 2023 by NOBLNG
Steve H Posted February 15, 2023 Posted February 15, 2023 1 minute ago, NOBLNG said: The interior paint is Premier Colonial Red from Canadian Tire, decanted and airbrushed. I found a local craft shop that has a bunch of colours of embossing powder so I see more carpets in my future.? I use the pointed ones for setting the foil in the crease before trimming,but they are a little flimsy for burnishing. I have some nice wooden ones I got at a local electronics supplier that worked great for the foil on the wheel well trim. Ohhhh, those look nice… What are they called? And what the heck does an electrician do with them?! I tend to end up holding the “flimsy” ones close to the bottom because of that. It would definitely be good to have a none flimsy version.
SpikeSchumacher Posted February 15, 2023 Posted February 15, 2023 In the words of Austin Powers... "Yeah, baby, YEAH!" ?
NOBLNG Posted February 15, 2023 Author Posted February 15, 2023 (edited) 22 minutes ago, Steve H said: Ohhhh, those look nice… What are they called? And what the heck does an electrician do with them?! I tend to end up holding the “flimsy” ones close to the bottom because of that. It would definitely be good to have a none flimsy version. Steve, these were MG Chemicals brand tapered tip swabs. I guess they are used for cleaning electronic components? I did buy some multi-sized single ended ones from Princess Auto too…..but they just snap if ANY side pressure is applied.? Edit: I don’t see the double ended ones anywhere, but here are singles. https://www.amazon.ca/MG-Chemicals-8112A-Tapered-8112A-100/dp/B08MWV1Q2R/ref=sr_1_2?crid=13B0W6GZNAW6L&keywords=mg+chemicals+swabs&qid=1676434802&sprefix=mg+chemicals+swabs%2Caps%2C117&sr=8-2 Edited February 15, 2023 by NOBLNG
Butter 1 Posted February 15, 2023 Posted February 15, 2023 Nice work!! That interior is awesome and your foil work is very nicely done.
slusher Posted February 17, 2023 Posted February 17, 2023 With your interior and and paint going to be a beautiful Charger!
TooOld Posted February 17, 2023 Posted February 17, 2023 Just came across this build and it's looking really nice Greg ! Your foil work and details are look near perfect and that interior . . . just WOW ! When I've used embossing powder it always takes a second application for a nice even finish , regardless if I used thinned Elmer's or anything else .
ModelcarJR Posted February 17, 2023 Posted February 17, 2023 Nice interior and foil, Greg! Still amazed that you don't sand or rub out your body paint. Nice work! ?
NOBLNG Posted February 18, 2023 Author Posted February 18, 2023 (edited) On 2/15/2023 at 5:47 AM, Joe Nunes said: Really coming along nicely. ? Joe On 2/15/2023 at 8:36 AM, Slotto said: Great job on the paint and foil On 2/15/2023 at 9:10 AM, drodg said: Very nice build. On 2/15/2023 at 11:06 AM, Butter 1 said: Nice work!! That interior is awesome and your foil work is very nicely done. 17 hours ago, slusher said: With your interior and and paint going to be a beautiful Charger! 8 hours ago, TooOld said: Just came across this build and it's looking really nice Greg ! Your foil work and details are look near perfect and that interior . . . just WOW ! When I've used embossing powder it always takes a second application for a nice even finish , regardless if I used thinned Elmer's or anything else . Yeah, I am definitely planning on two coats from now on!? 5 hours ago, ModelcarJR said: Nice interior and foil, Greg! Still amazed that you don't sand or rub out your body paint. Nice work! ? Thanks John…I have tried it a bit in the past, but I really don’t have the patience for it. And I don’t enter any contests so… Thanks for all the nice comments Guys, I appreciate the support. Edited February 18, 2023 by NOBLNG
NOBLNG Posted February 18, 2023 Author Posted February 18, 2023 (edited) I did the grill and tail light surround with thinned Tamiya SG black. I find that panel line accent doesn’t like to cover chrome very well. The Dodge lettering was foiled before primer and paint. The license plates are printed on label paper and covered with scotch tape. The Charger letters on the tail light and the lettering on the tires are done with a silver sharpie.? I am finished with this one now. More under glass pics here. http://www.modelcarsmag.com/forums/topic/179073-revell-‘67-charger/?do=edit Edited February 18, 2023 by NOBLNG 3
ModelcarJR Posted February 18, 2023 Posted February 18, 2023 Really nice work, Greg! That Tamiya LP white paint turned out nice. I just bought a couple of bottles of basic colors to brush paint small parts since I can't get Metalizer any more. I'll have to break out the air brush and give it a try in the future. Your Charger looks great! ??
doorsovdoon Posted February 18, 2023 Posted February 18, 2023 Beautiful work. Interior looks spotless!
NOBLNG Posted February 18, 2023 Author Posted February 18, 2023 11 hours ago, SpikeSchumacher said: Nicely done Greg! 1 hour ago, ModelcarJR said: Really nice work, Greg! That Tamiya LP white paint turned out nice. I just bought a couple of bottles of basic colors to brush paint small parts since I can't get Metalizer any more. I'll have to break out the air brush and give it a try in the future. Your Charger looks great! ?? 1 hour ago, doorsovdoon said: Beautiful work. Interior looks spotless! Thanks Guys!?
dino246gt Posted February 20, 2023 Posted February 20, 2023 Wow that Charger is beautiful! The interior is spectacular. I saw the car but missed looking inside as much as I should have. All I can say, besides gorgeous, is WOW!
adamelvis Posted March 7, 2023 Posted March 7, 2023 That is a lot of BMF work. It looks great ! TCB, Adam
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now