AmericanMuscleFan

WOW, it's all a mechanic to operate this type of car transporter, it's really complex. You are obviously well informed and prepared, great work Dan! 👍 That's a cargo that would be worth a small fortune today with the price of these superb muscle cars. 😁💰

Thanks Rich! So, I hope I have the same success with the engine and that you can also smell the exhaust emissions from your part of the country! 😉 Francis

Hello everyone, OK guys, this will be my last parts (accessories) update before I start the long and tedious process of machining the engine and transmission. There are still many more parts to make, the to-do list is still long but I think it's time to treat myself and move on to my favorite part of the project, anyway, it needs an engine! Today I'm updating the thread with the fuel cell, I made the tank with Evergreen black styrene sheet that I bought specifically for this. I could have used white styrene and painted it black, but why keep it simple when you can make it complicated? Anyway, I think the end result is convincing and it eliminates any chance of scratching the surface and seeing the white underneath, the real thing is black plastic, right? I used brass and aluminum for the other components, I am satisfied with the final result, do not hesitate to give me your impressions if you want. I'll be a while without posting updates (that doesn't mean I won't be active on the forum), I plan to take it up a notch from my last effort with the engine block. I've been doing more research and finding more references to guide me, this will definitely add to the machining time. As they say, measure twice and cut once, it's better to take your time than to start over! Francis No, it's not 2001: A Space Odyssey! 😁 I made the tank with black strene, it's almost impossible to see the joints but I used 0.080" sheets. I rounded the edges of the tank and drilled a hole for the outline of the cap. Then I made grooves for the retaining straps. The part around the cap that will be bolted to the tank at the start of machining. I drilled small holes for the mounting bolts. I then machined a seat for the cap. Now completed. The cap is machined from aluminum to provide color contrast. Now separated from the rod. Closer. The small tab used to open and tighten the cap is handmade. I used a small brass rivet to hold it in place. The retaining straps were cut from aluminum sheet. I've drilled holes for the fuel lines, I'll have to make the electric pump later. In its place in the rear trunk floor compartment that I had planned when I worked on the body components several months ago.

Thanks Charlie, It's coming soon for the start of the engine machining but I can't promise you quickly...😁 Francis

Thank you for this confidence Robert, if I was able to inspire you and give you the little push you needed to get started, it rewards me for all the time I spent working on them, I am honored! 😊 I will soon embark on this new chapter.

Superb job Scott, my ignorance and reluctance about 3D printed bodies is partly reassured by seeing your final product, the pictures speak for themselves! 👍

Glad to know you're going to venture yourself in such a complex process as machining the aluminum engine block and cylinder heads, it's my favorite kind of detail. I'm currently working on the fuel cell for my Demon project, and the engine block will be next. I'll be machining it out of aluminum me too; in fact, everything from the engine block to the accessories will be aluminum and/or brass. We'll be able to encourage each other! 😊

I repeat myself (this is probably the beginning of madness) but you know your subject Brian, the details of the firewall are more than credible, this leaves us with the impression that these connectors and relays are all functional, impressive is an understatement! 👍

Great work Steve, we recognize both Roger and your style since you share several tastes, the low to the ground position being the most obvious! In your own way, you are perpetuating the admirable work of a great modeler who left us too soon. Your passion for the hobby helps demonstrate that it can be much more than just assembling a simple styrene kit. Hats off my friend! 🎩

Nice paint job on the Sox and Martin car (actually on both cars), Bill. 👌

Cool Robert, it seems you have some nice tools too, I'm glad to see you're putting them to good use, the tank is well made as well as the cap. 👍 I'll be following with interest! Maybe you mentioned it in another thread, do you have Sherline equipment or is it a different brand?

There you go Daniel, the photos of the engine are superb, you had to highlight this jewel, you put so much effort into it!

Thanks for your kind comment Richard and welcome to the forum by the way! 👋 The hardest and longest part remains to be done (engine and transmission) so come back from time to time if you are interested. I hope to be able to start machining the engine block in the next few weeks. Francis

That would be nice Tim but we have to think of the others, those who hate winter, anyway, it's mother nature who will decide! I can't wait to start making the aluminum shavings fly! The only hint: RB block...........😁

This is absolutely FANTASTIC Tim, no need to tell you that I understand why you want to display these jewels outside the bodyshell, the spectators will then be able to fully appreciate the monk's work that you have accomplished! 👌

You mentioned: "The gods of styrene were talking to me in my sleep!" but I don't think that's true because I don't think you sleep at all my friend, to make such creations you have to stay awake 24/7 making you a hybrid between human and robot! 😁 Jokes aside, this is another quality creation that proves you can build anything with wheels no matter how many (4 isn't necessarily a limit for you)! The chances of coming back with trophies are greater when you are diversified and your arsenal will be impressive again this year! Make some space on your shelf my friend, it's very promising, too bad I can't be there to applaud you... 😔

More great details on the firewall Brian, the only problem is you have such great details all around this build, we won't know where to look! Nice problem isn't it? 😁

Superb engine bay Steve, the high color contrast between the engine, gold radiator top tank and the cabin is superb, another home run in the making! 👍

Very, very cool Scott, it's just on his four wheels and we can already tell that it's going to be a sure hit. There won't be many others on the table if you present it at a model car show!

Great work Steve, sorry I just noticed your project. I like that you went with the fleetside type box, I prefer this to the stepside version. These square bodies are so popular today and your plan to lower the suspension will produce a great look, a sure hit! I really like the moldings you added, they are very well done! 👍

So, if I touched you with my appreciation of your latest effort, I can make the same comment to you my friend! The goal is not to try to say better, I will end by telling you that by taking the time to write these words of encouragement (because it is!) you make me realize that all these hours making them and taking pictures of them were worth it! 👍 Francis

That's some serious bodywork you've done there Michael, you're no novice, it's very well done! It's a very interesting project, I'll come back and see your progress, with "Barracuda" in the title you've got me hooked! 😊

So, maybe this will give you an extra reason to keep going and push yourself like you do every time. I really enjoy this hobby, but the connections we create and the values we can decipher from our peers without knowing each other or having met in person (distance obliges) give this forum its full meaning.

Thanks Steve, this is more than just a fun hobby, sharing my crazy excesses is part of it and I appreciate that it can motivate others or at least get them to express their approval! 😊 Francis Thanks Andrew, that is to say, sometimes it is the simplest things that have the greatest effect, beauty is in the eye of the beholder! 😉 Francis

What a great build Ian, every photo shows superbly crafted and professionally assembled parts, this group effort (with the help of passionate and skilled people) has created another superb build. Backed by a story, a story of recognition of those who have made their mark on motorsport in this beautiful corner of Canada. Thank you for sharing your passion with us my friend, this simple hobby proves once again that it can produce much more than just a toy to display on a shelf! 👌