Jump to content
Model Cars Magazine Forum

gtx6970

Members
  • Posts

    7,654
  • Joined

  • Last visited

Everything posted by gtx6970

  1. Update I'm looking at colors for this build Far left for exterior color The 2nd and 3rd for interior colors Notice the difference between the 2 TS 21 golds purchased almost 10 years apart All samples are painted over place white spoons
  2. very cool build, Keep it going
  3. What color I'm after and who has it... determines what type of paint i have to use But for the most parts Tamiya or Duplicolor lacquer is 90% of what i use for exterior finishes. Tamiya acrylics or testors enamels for everything else( brush painted)
  4. Correct Im going to replicate the silver/blue SS car, I also have a resin body and most of an old MPC Charlie Allen '69 to go along with it , SO , I MIGHT do the AA/FC as well . I have the silver/red '69 AA/FC car done already
  5. Very nice I have one of the original MPC kits built and in the case One of my all time favorite cars The decals are avail now if you care to do the blue-silver 68 version
  6. Thanks, Everyday is Saturday
  7. Spent the afternoon today doing the BMF work on the body . That was fun, NOT. Its moving forward, even if it is quite slowly I have everything here I need for it. So, it should be finished next couple weeks Magazines for reference material are SSDI December 1967 and Car Craft April 1967
  8. Great looking build so far ps, If someone is going to resin cast that seat. I could be interested in a couple sets
  9. Great idea, And especially cool because the 1/1 in fact HAS the slot in the back for the hinge to retract into
  10. After Wet sanded with 1000 grit You can't feel the line where the stripes are Then Polished by hand
  11. I used it for the 1st time on these 2 the Sox-Martin car is wet sanded and polished And I have ZERO complaints with it . Maybe one of the best paint jobs Ive ever done with a rattle can
  12. I just went thru thios post. And have to say, WOW, is simply not enough. To go thru the amount of work to build this is mind blowing/ The decals alone would put me over the top beyond repair My hats off to you. Anxiously awaiting the finished product
  13. I have these. I've no idea what they are out of Although probably not accurate to the OPs needs
  14. Anyone have the chrome reverse rims they aren't using All 4 please
  15. Ok, Update Being the tight wad I am I was searching ebay for sellers parting out kits and someone posted the chrome rims from a Lindberg 64 Dodge So, I went thru just about every Lindberg Mopar kit I had that I thought had steel wheels in them Found 4 real nice ones in the Lindberg Maverick Dodge kit, AND all 4 are chrome Went thru the Lindberg spare kits box and found two ft tires that fit said chrome steel wheels. ( Ive parted a bunch of these kits out in the past 15 years ) AND with some offset mods they will fit the Revell wheel backs for the front end. Rears are also same Lindberg wheels but in the Revell 67 GTX kits rear tires and kit wheel backs That way everything fits the revell kits chassis components , And the simpler the better PERFECT , for me anyway Thanks all for the quick replies. It sure opened my eyes to look around the stash a bit
  16. I just pulled one of these kits down Tires are ok, but the rims are not chrome. Which creates another problem PLUS ,,,, these tires will fit the chrome wheel from said 63-64 Ford( which are far from my ideal 1st choice ) . BUT then the tires dont fit the Revell wheel backs that fit the rear axle in said kit that position the tires in the wheelhouse right
  17. I have one on the bench I need these rims for , ft and rear Its a drag car, based on the Revell 1967 GTX. So if I can come up with wheels that fit this kits tires is a bonus I've sprayed some Spazstix over a gloss black base spoon test. Its OK at best so am looking for options Sending rims out to be plated , Is not one of those options I've pulled the front rims out of the recent issue 63 or 64 Ford and the fronts I can use in a pinch but the rears are far far to small
  18. Many Thanks But I agree , I've been looking at wheel pictures of this particular car and Im leaning more towards a dark silver grey color for the rim recesses
  19. Cking for final stance. Im torn between using the kit no name rear tires and the recent MPC blue streaks Mpc redlines front tires are a lock I think the blue streaks are a little more correct in both stance AND appearance wise for THIS particular car. So I'm 90% certain I'm using them Plus they just look cool
  20. Agreed 1000% I just received about a half.dozen of his dists this week actually
  21. The fear of receiving junk Keeps me.from buying these 3d parts same as resin from sellers I've never dealt with before This will change at some point I'm sure. But for now...I have far more than enough to keep my busy
  22. Oh I will. This is just a stance ck I'm not sure yet if I'm even using these tires
  23. small update Been working on a 1/1 projects so Model bench time is a bit slower I got in some wheels and wheel backs to fit the car and Using a Dana axle . All from the Revell 68 Charger ( gotta be accurate if I can ) So a general mockup had to be done just to see how its gonna set on the tires . And I think I like it . Not too high, not too low all the way around edit, Better pictures
  24. Unless its some high end MPC body ( even then Im not sure I would try ) Or has some sentinemtal attachement then and only then MAYBE
×
×
  • Create New...