Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted (edited)
  On 9/28/2021 at 8:00 PM, SfanGoch said:

A real glue bomb. :P:D

exotic-grenade-like-sticky-glue-during-world-war-ii-picture-6-YixAwX0jy.jpg.97c225624a97999f1206a91135574f15.jpg

 

I've never invested time or money for a built model that looks like poop box material just because I might be interested in the subject matter. I prefer starting fresh from new or old virgin unbuilt.

Expand  

I tend to agree.

I don’t mind starting with a nice rebuilder, but I won’t spend my precious modeling time repairing busted windshield frames, broken fenders, fused in glass, crushed roofs, severe glue rash, etc, unnecessarily, especially if it’s an easily replaced kit.

A bunged up original issue AMT 1965 Pontiac Grand Prix holds no value for me when I can get a pristine re-issue inexpensively and can start from scratch.

 

 

 

 

Steve

Edited by StevenGuthmiller
  • Like 1
Posted
  On 9/28/2021 at 8:00 PM, SfanGoch said:

I've never invested time or money for a built model that looks like poop box material just because I might be interested in the subject matter. I prefer starting fresh from new or old virgin unbuilt.

Expand  

Then you'll never experience the joy and pride of bringing one "back from the dead." 

  • Like 2
Posted

It's always worthwhile for a kit that was never reissued. Years back I got a 1961 Thunderbird convertible from a buddy- my first resurrection- when I get a minute I'll take a photo. No wip photos, wasn't taking pix back then. The top of the engine was unsalvageable but some parts from the bin made a very healthy replacement.

Posted
  On 9/28/2021 at 10:22 PM, Snake45 said:

Then you'll never experience the joy and pride of bringing one "back from the dead."

Expand  

I don't disparage what others might do (not in the public fora, at least :D ); but, resurrecting terminally dead plastic ain't my church. Firstly, there are no toy shows around here for me to rummage through for model kits, builtups or glue bombs. Secondly, flea markets and porch/yard sales here are fantastic if you're looking for an old Remington typewriter missing all of the vowel stamps, dog-eared copies of Saul Alinsky's "Rules for Radicals" or vintage ( read used) underwear. The gentrifying interlopers aren't into common, pedestrian leisure activities like mainstream hobbies such as model building; and, neither are their kids. I'm also not going to pickup a ridiculously built ready-for-demolition-by-M-80 glue bomb with every single customizing accessory welded on with three tubes' worth of cement with broken and/or missing key parts on ebay for an equally ridiculous price  just because I have an interest in the particular subject. Trying to restore a styrene abortion such as described isn't worth the time or effort when it ends up being a laborious ordeal because of the condition and I still have to do a scavenger hunt for parts which are, more often than not. unobtainium. I don't feel like forking over twenty buck or more for a stupid hood ornament or taillight lens, among other missing necessary parts, if they are MIA or completely FUBAR. :)

Posted
  On 9/28/2021 at 10:16 PM, StevenGuthmiller said:

I tend to agree.

I don’t mind starting with a nice rebuilder, but I won’t spend my precious modeling time repairing busted windshield frames, broken fenders, fused in glass, crushed roofs, severe glue rash, etc, unnecessarily, especially if it’s an easily replaced kit.

A bunged up original issue AMT 1965 Pontiac Grand Prix holds no value for me when I can get a pristine re-issue inexpensively and can start from scratch.

 

 

 

 

Steve

Expand  

I agree on an easily replaced kit. But, a pristine kit that can approach $200-$300 is a different story. I'd rather spend the time and save the money. Plus, for me, I enjoy turning an old model or promo that most would dismiss into something nice. There's a satisfaction that comes with it that you can't get from a fresh kit. Plus, there's something to be said about the skills one gains along the way. 

  • Like 1
Posted
  On 9/28/2021 at 10:16 PM, StevenGuthmiller said:

I don’t mind starting with a nice rebuilder, but I won’t spend my precious modeling time repairing busted windshield frames, broken fenders, fused in glass, crushed roofs, severe glue rash, etc, unnecessarily, especially if it’s an easily replaced kit.

A bunged up original issue AMT 1965 Pontiac Grand Prix holds no value for me when I can get a pristine re-issue inexpensively and can start from scratch.

Steve

Expand  

In general and in principle I agree with this completely. B)

On the other hand, that thoroughly roached '65 Elky I showed on the previous page, which I'm now working on? Ironically, just last week I bought on sale two brand new copies of the same kit! :blink:

"It's like RAY-EE-AAAAAAAAIN, on your wedding day....." :lol:

Part of the reason for this one is, I was inspired by the Flip/Kamikaze El Camino on Street Outlaws. It was built out of junk, scrap, and parts others had discarded, and I'm trying to build up this model exactly the same way, using only leftovers and castoff parts from the scrap box that would otherwise never see the glory of my display shelf. Gotta have some pure FUN every now and then! B)

Posted
  On 9/29/2021 at 12:34 AM, Plowboy said:

I agree on an easily replaced kit. But, a pristine kit that can approach $200-$300 is a different story. I'd rather spend the time and save the money. Plus, for me, I enjoy turning an old model or promo that most would dismiss into something nice. There's a satisfaction that comes with it that you can't get from a fresh kit. Plus, there's something to be said about the skills one gains along the way. 

Expand  

I agree to a point, and believe me, I’ve done my share of resurrections, but I’ve always found it to be well worth my while to be very careful and selective when I am searching for vintage plastic. 
I would much rather spend an extra $30.00 on the built vintage kit that is intact, but covered in 8 coats of enamel paint, than spend $30.00 less on the one with the crushed roof and then spend countless hours just to make it whole again.

This attitude has served me very well over the years.

I have pretty much every model that I’ve ever wanted, and I haven’t had to fix an A-pillar on a single one! ?

 

 

Steve

  • Like 1
Posted

Finding a restorable built model car is no different from searching out a restorable 1:1 car...buy the best, most complete one you can afford.  The cheapest one seldom turns out to be the least expensive one over the long haul.

But there are certain ones that you don't trip over at every swap meet, and seldom turn up on eBay.  If you really want one and nothing else will do, sometimes you have to take whatever comes along, and just deal with it.

  • Like 2
Posted (edited)
  On 9/29/2021 at 1:16 AM, Mark said:

Finding a restorable built model car is no different from searching out a restorable 1:1 car...buy the best, most complete one you can afford.  The cheapest one seldom turns out to be the least expensive one over the long haul.

But there are certain ones that you don't trip over at every swap meet, and seldom turn up on eBay.  If you really want one and nothing else will do, sometimes you have to take whatever comes along, and just deal with it.

Expand  

True, but patience pays off. 
I never thought that I would see the day when I would ever find good rebuildable examples of some of the rarest kits in my collection, and in some cases it took years to find things like a Johan ‘68 Olds 442 or an MPC ‘66 Dodge Monaco, but they both eventually materialized, and I didn’t have to compromise on price or condition with either one.

In almost every case, (at least for me) I’ve always been glad that I passed on the basket case and waited the extra time for the nice one to come along, and in my experience, they usually do if you give it time.

 

 

 

Steve

Edited by StevenGuthmiller
Posted

I don’t see pictures of restorables like thread says. Let’s stick to topic of nice rescues. Please. Maybe a new thread to pro/con rebuilds?

Snake, great work, Plowboy too. End result and amusement is all that matters really. “Model on!”

  • Like 2
  • Haha 1
Posted

Snake started the thread and is participating in the discussion so it seems he's fine with it. But you do have a heart by your comment so it is possible he has a heart on for you.

  • Haha 1
Posted

Here is my 2008 vintage description of my 1st Glue Bomb.

 

This model was built to loosely resemble a black over red 70 Grand Prix I owned for a number of years in the late 90's. It started out as a built-up glue bomb purchased on ebay. It was brush painted blue and looked pretty bad at first. After a dip in the "purple lake" I surveyed what was salvageable. The body, bumpers and interior were fair but the engine was a blob. Fortunately, I had a Revell Parts-Pack Pontiac 421. I soaked it in Westly's to dechrome it and sourced the stock air cleaner and other items from the parts bin. I actually made my own wired distributor from supplies picked up at Radio Shack and Hobbytown USA. I used a technique I learned on Drastics about BMFing emblems BEFORE painting and then scraping off the paint on the raised areas to expose the letters. It actually worked quite well. Especially since the "Grand Prix" emblems are separate block letters. It did a fair job on the front fender louvers as well. The interior is pretty basic, with just some minor detailing. The underside being an old MPC offering with chassis screws, is nothing to write home about. I did do my signature red mufflers (a throw back to the Cherry Bomb glass pack days). The engine compartment is anatomically all wrong compared to a real GP. Especially in the fan shroud/radiator areas. I did not have the parts to correct it though, so it is what it is. The mags are Modelhaus Keystone Klassics which have been painstakingly detailed. I performed my signature rear tire widening technique to fill in the rear wheel wells. The tires have been lettered with a "Gelly Roll" pen from a local stationary store. The windows were boogered up but, using progressively finer grit polishing cloths, finished off with a coat of Future, they look as good as new. Sharpie markers applied here and there round out the small details. I am pretty pleased at how my first restoration turned out.

70 GP LR.jpg

70 GP RF.jpg

Engine DS.jpg

  • Thanks 2
Posted (edited)

Lots to say. I started new thread. Heart on. Lol. Mrs. Snake doesn’t Let him date ?

Great GP Bill. Nice save. Good looking cars still. 

Edited by keyser
  • Haha 1
Posted
  On 9/29/2021 at 4:04 AM, Bills72sj said:

Here is my 2008 vintage description of my 1st Glue Bomb.

 

This model was built to loosely resemble a black over red 70 Grand Prix I owned for a number of years in the late 90's. It started out as a built-up glue bomb purchased on ebay. It was brush painted blue and looked pretty bad at first. After a dip in the "purple lake" I surveyed what was salvageable. The body, bumpers and interior were fair but the engine was a blob. Fortunately, I had a Revell Parts-Pack Pontiac 421. I soaked it in Westly's to dechrome it and sourced the stock air cleaner and other items from the parts bin. I actually made my own wired distributor from supplies picked up at Radio Shack and Hobbytown USA. I used a technique I learned on Drastics about BMFing emblems BEFORE painting and then scraping off the paint on the raised areas to expose the letters. It actually worked quite well. Especially since the "Grand Prix" emblems are separate block letters. It did a fair job on the front fender louvers as well. The interior is pretty basic, with just some minor detailing. The underside being an old MPC offering with chassis screws, is nothing to write home about. I did do my signature red mufflers (a throw back to the Cherry Bomb glass pack days). The engine compartment is anatomically all wrong compared to a real GP. Especially in the fan shroud/radiator areas. I did not have the parts to correct it though, so it is what it is. The mags are Modelhaus Keystone Klassics which have been painstakingly detailed. I performed my signature rear tire widening technique to fill in the rear wheel wells. The tires have been lettered with a "Gelly Roll" pen from a local stationary store. The windows were boogered up but, using progressively finer grit polishing cloths, finished off with a coat of Future, they look as good as new. Sharpie markers applied here and there round out the small details. I am pretty pleased at how my first restoration turned out.

70 GP LR.jpg

70 GP RF.jpg

Engine DS.jpg

Expand  

Beautiful Pontiac sir!

Posted
  On 9/29/2021 at 3:54 AM, Tabbysdaddy said:

Snake started the thread and is participating in the discussion so it seems he's fine with it. 

Expand  

Wish it hadn't devolved into a "glue bombs yes-or-no" sort of discussion. The original idea was to show glue bombs in their original state, whether you were restoring them or planning to or just wanted to laugh at them as "a good example of a bad example." Before-and-After pics seem to be in the spirit of the thread. Pics of a nicely built finished model AFTER restoration/rebuild, without any BEFORE pics, are not. 

Posted
  On 9/29/2021 at 1:35 AM, StevenGuthmiller said:

True, but patience pays off. 
I never thought that I would see the day when I would ever find good rebuildable examples of some of the rarest kits in my collection, and in some cases it took years to find things like a Johan ‘68 Olds 442 or an MPC ‘66 Dodge Monaco, but they both eventually materialized, and I didn’t have to compromise on price or condition with either one.

In almost every case, (at least for me) I’ve always been glad that I passed on the basket case and waited the extra time for the nice one to come along, and in my experience, they usually do if you give it time.

 

 

 

Steve

Expand  

How true Steve, I have found a few by simply waiting a while....& spending less..the ratty glue bombs are sometimes good for rare parts....

Posted

Let’s face it.. you are either a glue bomber or not! For me, when I see an old classic in poor condition, I respect that it’s survived some 40-60 years and it’s time it shines!

6CC53E5D-6944-4603-A2F3-4FD6E12985E3.jpeg.d0c4b6b0d87390197fb7ffe14ae454ed.jpeg

A guy at a club meeting had a bunch of old built ups in boxes for $5 each. He was hawking that he needed money, so I bought four to help him out. 

I kept coming back to this one.. there was something about that flat green that grabbed me..

E830129E-F651-404F-8369-1D0FE912905F.jpeg.45289aa0713e076a29106eb5688ff171.jpeg

I needed a quick project so I turned it into this!  And this is the one that got me into the old Monogram Model A’s!

9C1F5ED0-84AA-4819-9899-CA18576BE677.jpeg.4c6a234dc2b4c7b48e75f8e466be2fc4.jpeg

Then I got this one in a bag of parts. Again, it had personality.. that top chop done by a kid back in the early 1960s. It didn’t appear to have ever been completed.

F384ADD6-D076-45B3-AF39-9E68AEE09F47.jpeg.a3a91ed26a4cb16489913f8821ea0b34.jpeg

And it became this blue bomber! 
 

670310A3-4DC9-4942-8560-5E02AB5AD398.jpeg.c56483867755894d0c45d2c515572e3a.jpeg

A local dealer friend just handed me this in a plastic bag.. can ya fix it?  It was an original Blue Beetle so why not?

C6E94EBD-97C3-4C66-97E7-D6296A84C9AF.jpeg.f7a72f17b02578213c20e8a5630dce46.jpeg

Restored and sitting on the shelf! 

47CA7722-4C7B-4445-9FC4-BA51842C9A9E.jpeg.86fa589d73806630867852514b7d8546.jpeg

Again a freebie. A guy knew I was into Valiants. I guess giving it to me was a better option than throwing it away!  I felt challenged to do something with it…

A6DCBC74-49EE-4350-9D16-F279957FD419.jpeg.40d174db0ca7d85d8791f14da3b251d1.jpeg

Everything came from the parts box. My favorite save!

And I’ve got more!

  • Thanks 1
Posted
  On 9/29/2021 at 1:33 PM, Snake45 said:

Wish it hadn't devolved into a "glue bombs yes-or-no" sort of discussion. The original idea was to show glue bombs in their original state, whether you were restoring them or planning to or just wanted to laugh at them as "a good example of a bad example." Before-and-After pics seem to be in the spirit of the thread. Pics of a nicely built finished model AFTER restoration/rebuild, without any BEFORE pics, are not. 

Expand  

I humbly apologize for my incorrect entry.

  • Thanks 1
Posted

 Here is one I have which I think meets the criteria of glue bomb. I picked it up off e-bay a few years ago and have plans to rebuild it some day. I think it is fixable. 

 

Jerry

DSC02695.JPG

DSC02696.JPG

DSC02697.JPG

  • Like 1
Posted
  On 9/30/2021 at 11:25 PM, Nazz said:

 Here is one I have which I think meets the criteria of glue bomb. I picked it up off e-bay a few years ago and have plans to rebuild it some day. I think it is fixable. 

Jerry

 

DSC02697.JPG

Expand  

That's a MAGNIFICENT example of a glue bomb, and very rebuildable! (If you ever decide you don't want to do it, contact me about a trade of some sort. ;) ) Drive on! B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...