ewetwo Posted May 20, 2020 Share Posted May 20, 2020 On 4/22/2018 at 12:24 PM, Tom Geiger said: As mentioned, Palmer box art is interesting and fun to collect. Many years ago in the hobby you'd see them at swap meets for $5 or $10, so I started to collect them... I have the body and the front grill of this falcon.. Been looking for the other parts but no luck. Frame rails. Wheels. Back bumper. I watch Ebay to see if the parts come up and I've seen some of the Palmer kits are getting expensive. A Dodge went for over $100. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted May 20, 2020 Share Posted May 20, 2020 Yes, back 20 years ago I was buying Palmers for the box art and was paying $5 to $10 apiece for them. Lately the asking prices have become costly, I guess people are collecting them for the nostalgia aspect, much like collecting old toys. Quote Link to comment Share on other sites More sharing options...
Mike999 Posted May 21, 2020 Share Posted May 21, 2020 (edited) 20 hours ago, Tom Geiger said: Lately the asking prices have become costly, I guess people are collecting them for the nostalgia aspect, much like collecting old toys. I poke around eBay a lot and sometimes see Palmer kits for outrageous prices. eBay has some well-known old kit dealers/sellers and in general, they don't seem to do that. They know what the kits are worth. The nosebleed prices usually seem to come from Ye Ole Anteek & Junque Emporiums. The wanna-be American Pickers. They're sort of like those well-meaning aunts who bought us Palmer kits for our birthdays. They don't know much about model car kits, and see one kit as not much different from another. So when they see an original AMT '62 Falcon selling for big bucks, they believe their Palmer '62 Falcon should be worth the same price. Maybe even more, because the box art is so exciting! Edited May 21, 2020 by Mike999 omit Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted May 21, 2020 Share Posted May 21, 2020 43 minutes ago, Mike999 said: The nosebleed prices usually seem to come from Ye Ole Anteek & Junque Emporiums. The wanna-be American Pickers. They're sort of like those well-meaning aunts who bought us Palmer kits for our birthdays. They don't know much about model car kits, and see one kit as not much different from another. So when they see an original AMT '62 Falcon selling for big bucks, they believe their Palmer '62 Falcon should be worth the same price. Maybe even more, because the box art is so exciting! EBay gives sellers a bunch of free listings every month. So it costs them nothing to go trolling for suckers! Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted May 22, 2020 Author Share Posted May 22, 2020 Some time ago, I saw more Palmer's with their universal wheelbase and then it dawned on me where they were targeting their market: Slot cars!!! The generic chassis, roughly 1/32 scale, molded in interior and general indifference to accuracy. Slot car racers wanted quick bodies to race. Half the time they'd bash them up and break them anyway, so they would need another replacement, quick and cheap! Notice that Palmer Plastics closed right around the time the slot car fad died out. Just my speculation. Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted May 22, 2020 Share Posted May 22, 2020 (edited) 19 hours ago, Oldcarfan27 said: Some time ago, I saw more Palmer's with their universal wheelbase and then it dawned on me where they were targeting their market: Slot cars!!! The generic chassis, roughly 1/32 scale, molded in interior and general indifference to accuracy. Slot car racers wanted quick bodies to race. Half the time they'd bash them up and break them anyway, so they would need another replacement, quick and cheap! Notice that Palmer Plastics closed right around the time the slot car fad died out. Just my speculation. The big slot car fad faded out well before Palmer did. And I've never seen one of their kit bodies use as slot car. Their regular kits, not the reboxed Pyros, with the multi piece bodies would never have held up to the riggers of slot car racing. I had a few Palmers in my day. I always remember getting them for gifts from well meaning older relatives, and parent's friends, who knew nothing about models. I alway built them, and displayed them with my other models. The old I kind of I had today was their '73 Thunderbird. A terrible kit. But, a post '71 AMT Thunderbird, none the less. There is one on eBay for $65. Way more than I'm willing to pay. But, check out that cool box art! Edited May 22, 2020 by unclescott58 Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted May 22, 2020 Share Posted May 22, 2020 Check this one out. A '71 Thunderbird popin a wheelie. Very realistic. Quote Link to comment Share on other sites More sharing options...
Mark Posted May 23, 2020 Share Posted May 23, 2020 Palmer sold out to another company around 1975. The new owners changed the box art to photos of assembled models for their 1976 kits. That's what drove the stake into Palmer! Quote Link to comment Share on other sites More sharing options...
SfanGoch Posted May 23, 2020 Share Posted May 23, 2020 Pyro Plastic Corporation acquired Palmer in 1970. Pyro was sold to Life-Like in 1972 and, in 2005, the parent company Lifoam Industries, LLC, chose to concentrate on its core manufacturing business and sold the model railroad division to Walthers. Palmer, incidentally, also reboxed Pyro kits. Quote Link to comment Share on other sites More sharing options...
SCRWDRVR Posted May 24, 2020 Share Posted May 24, 2020 Quote Link to comment Share on other sites More sharing options...
Jimmy Razor Posted December 1, 2020 Share Posted December 1, 2020 On 4/20/2018 at 6:47 AM, Mike999 said: Here's a Palmer discussion at The Other Model Car Magazine. One poster mentions that Palmer mostly made plastic food containers, and model kits were only a side job. Comments from poster Jimmy Razor: "I am a regular contributor at scalemates.com, and have additional insight into Palmer. Like AMT and MPC, Palmer offered a series of "annual" kits, featuring cars from the current model year. Specifically, these are the "bad" kits. Palmer's outdated molding process meant multi-piece bodies with shallow interiors. The individual parts were poorly-engineered with terrible fit and often with inaccurate shapes. Again, these were "junk" models, only of interest to nostalgic collectors. Not all offered by Palmer was "junk," though. Through a mold-sharing program with Pyro, Palmer offered a budget version of Pyro's "Table Top" series. These were a selection of 1930's through 1950's cars in approximately 1/32 scale. Price was kept at 29 to 60 cents through the omission of clear or chrome parts. Although these "Budget Pyros" were basic by today's standards, they were fairly accurate in their overall shape and detail. Engineering was fair-to-good with decent fit, in spite of multi-part bodies. The primary weakness of these kits was aging molds leading to excessive flash. I built about a half-dozen of these Palmer cars in the early 'seventies, and really enjoyed them. Most were later reissued by Life-Like and Lindberg, and remain available. An experienced model builder can make these basic kits look rather nice." http://cs.scaleautomag.com/sca/ask_scale_auto/f/11/t/125685.aspx Quote Link to comment Share on other sites More sharing options...
Jimmy Razor Posted December 1, 2020 Share Posted December 1, 2020 Thank you for reposting my comments from elsewhere. The history of Palmer is far more interesting than the models themselves. An evolution of Premier, one of the earliest American plastic kit makers, Palmer remained popular for over a decade, relying upon marketing in dime stores and pharmacies. They were an incredibly prolific manufacturer, often creating the same car in different scales each year. As noted, their annuals were very poor with sub-par engineering and fidelity of detail. The 1/32 scale 1930's and 1940's cars were much better, being mostly sourced from Pyro. The 1940 Ford Tudor Sedan was an original mold, though it appears to be a copy of AMT's version of the same car. Towards the end of their run, owner Pyro was sold to Life Like. Palmer attempted to continue as an independent, going through a few rebrandings. Around 1971, they tried to compete with AMT and MPC 1/25 scale annuals with their own "initials" brand, PMC. These were of a higher quality and the molds were used for Lindberg reissues in the 1990's. Around 1973 and '74, the Palmer name was briefly dropped and the brand became Winneco. This iteration not only continued the 1930's and 1940's cars, but also reboxed 1/72 scale tanks from Japan. In their final year, 1974 - '75, the final rebranding ",Palmer Hobbies," was in place. It reissued most of the classic cars and added a line of 1975 annuals. By the Bicentennial year, Palmer was history. Most of their molds ended up with the aforementioned Lindberg, who continue to reissue vintage Palmer to this day. Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted December 2, 2020 Author Share Posted December 2, 2020 Good thing they did, with SAE gone so would have been your insights! Quote Link to comment Share on other sites More sharing options...
Mike999 Posted December 2, 2020 Share Posted December 2, 2020 19 hours ago, Jimmy Razor said: Thank you for reposting my comments from elsewhere... You're most welcome! Glad you found us. And thanks for the extra information. If you have the time and inclination, maybe you should write an article with all your Palmer/Pyro info and post it here. I'd love to read it. Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted December 2, 2020 Share Posted December 2, 2020 Wow, so there's a market for the Palmer boxes? There were a couple of kits for $10 at a local antiques market a couple of years ago. Thought about grabbing them, but heard so much about the poor quality, I passed on them. The box art was pretty cool. One was the Cougar XR7, can't remember what the other was. Quote Link to comment Share on other sites More sharing options...
abysss Posted January 16, 2023 Share Posted January 16, 2023 (edited) So I just discovered recently the existence of these Palmer Plastics model kits. I noticed they also with PSM as their logo as seen in the boxart below, but can't be found when searching for PSM 1/25, at least that's my experience. I was immediatelly captured by their box art. I see they really put the extra mile in making the cars look as slick and low as they could, sporty so to speak, some epic even. I love their box arts. There were especially two box arts I fell in love with, The King Of The Road stingray corvette from the late 60s and the "Blow Your Mind" Vette. I wanted to get these kits, but to my surprise they were nowhere to be found, I guess they are both pretty rare. But I was curious how they might have looked, based on their box art. And while I couldn't find any information about the King of the reoad kit, apart a small box art picture posted on scalemates, I managed to find a picture of what's in the box of the "Blow your mind" vette on worthpoint. I thought the kit parts on the sprues and the body looked pretty decent. But this was pretty much the only Palmer Plastics model of which I have seen the contents of the box. So reading this thread I was totally unaware that these kits were so trashy, also as we see in the video. Anyway, I just wanted to share a few words and the 2 boy arts I love so much, and also another one I find cute. the contents of the box, can be seen here: https://www.worthpoint.com/worthopedia/blow-mind-corvette-funny-car-1960s-25-474773116 And just today, when searching for the worthpoint page I found something precious, right on this forum, someone restored a Blow You Mind vette, and did an outstanding job on it, I might add. It looks very nice, except minus the rear are too big for my taste. So, if you might have missed this post, here is the link http://www.modelcarsmag.com/forums/topic/155998-yes-its-a-palmer71-corvette/ Edited January 16, 2023 by abysss Quote Link to comment Share on other sites More sharing options...
junkyardjeff Posted January 19, 2023 Share Posted January 19, 2023 I have a 72 Mercury Monterey I might try to build when I get bored and see what I can do with it. Quote Link to comment Share on other sites More sharing options...
ewetwo Posted January 19, 2023 Share Posted January 19, 2023 I have a Corvair I “rebuilt”. And 2 Ford Falcons. A sedan and a convertible. Only the falcon convertible box. And Tempest box and a few Tempest parts.. And an untouched 1965 impala convertible kit with the box.. Don’t know if I’ll ever build the last 3 I mentioned. Quote Link to comment Share on other sites More sharing options...
Carmak Posted January 19, 2023 Share Posted January 19, 2023 On 1/15/2023 at 9:02 PM, abysss said: So I just discovered recently the existence of these Palmer Plastics model kits. I noticed they also with PSM as their logo as seen in the boxart below, but can't be found when searching for PSM 1/25, at least that's my experience. I was immediatelly captured by their box art. I see they really put the extra mile in making the cars look as slick and low as they could, sporty so to speak, some epic even. I love their box arts. There were especially two box arts I fell in love with, The King Of The Road stingray corvette from the late 60s and the "Blow Your Mind" Vette. I wanted to get these kits, but to my surprise they were nowhere to be found, I guess they are both pretty rare. But I was curious how they might have looked, based on their box art. And while I couldn't find any information about the King of the reoad kit, apart a small box art picture posted on scalemates, I managed to find a picture of what's in the box of the "Blow your mind" vette on worthpoint. I thought the kit parts on the sprues and the body looked pretty decent. But this was pretty much the only Palmer Plastics model of which I have seen the contents of the box. So reading this thread I was totally unaware that these kits were so trashy, also as we see in the video. Anyway, I just wanted to share a few words and the 2 boy arts I love so much, and also another one I find cute. the contents of the box, can be seen here: https://www.worthpoint.com/worthopedia/blow-mind-corvette-funny-car-1960s-25-474773116 And just today, when searching for the worthpoint page I found something precious, right on this forum, someone restored a Blow You Mind vette, and did an outstanding job on it, I might add. It looks very nice, except minus the rear are too big for my taste. So, if you might have missed this post, here is the link http://www.modelcarsmag.com/forums/topic/155998-yes-its-a-palmer71-corvette/ There is an old joke: Do you know who the highest paid person at Palmer is? The guy that does the box art. The point is that the box art was better than the kit in the box. Often Palmer kits are caricatures that are of no particular scale and can be hard to recognize. The "PSM" kits are actually fair kits. I think they started in 1970 and many of the tools from that era were still around a few years ago and sold as Lindberg kits. Quote Link to comment Share on other sites More sharing options...
abysss Posted January 20, 2023 Share Posted January 20, 2023 (edited) Yes I've read somewhere along the way that some of the palmer models were later sold as Lindberg kits. But I also saw some old AMT kits that have cover art like Palmer's or very similar. like this one Edited January 20, 2023 by abysss Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.