VanSpence Posted January 4, 2020 Share Posted January 4, 2020 On 12/28/2019 at 12:38 AM, Dann Tier said: -Photo 6-8; The whole turbo-exhaust set up is coming along! To repair the marks in the solder made by the looping pliers, i added a drop of CA glue to the spots...after sanding, you wont be able to tell anymore. -Photo 9&10; Everything is fitting Perfectly!! I have to say, that turbo set up is pretty amazing and look really good. Are you working from any images specifically or just going off the top of your head? What did you use to make the round parts of it? No where near considering this level of scratch building but it would be great info to have. Thanks for sharing. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted January 5, 2020 Author Share Posted January 5, 2020 6 hours ago, VanSpence said: I have to say, that turbo set up is pretty amazing and look really good. Are you working from any images specifically or just going off the top of your head? What did you use to make the round parts of it? No where near considering this level of scratch building but it would be great info to have. Thanks for sharing. Thanks, Spence!, I do work from reference photos. The round parts are shaped from flat styrene. Very soon, i plan on showing how...step by step. Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted January 5, 2020 Share Posted January 5, 2020 (edited) Great work on this build! Edited January 5, 2020 by Mattilacken Quote Link to comment Share on other sites More sharing options...
VanSpence Posted January 5, 2020 Share Posted January 5, 2020 8 hours ago, Dann Tier said: Thanks, Spence!, I do work from reference photos. The round parts are shaped from flat styrene. Very soon, i plan on showing how...step by step. That is awesome you will be doing a step by step. I will look forward to that. Appreciate the efforts. Thanks. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted January 8, 2020 Author Share Posted January 8, 2020 On 1/5/2020 at 1:43 AM, Mattilacken said: Great work on this build! Thanks alot, Anton! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted January 8, 2020 Author Share Posted January 8, 2020 On 1/5/2020 at 8:03 AM, VanSpence said: That is awesome you will be doing a step by step. I will look forward to that. Appreciate the efforts. Thanks. You are more than welcome!! Quote Link to comment Share on other sites More sharing options...
Twokidsnosleep Posted January 28, 2020 Share Posted January 28, 2020 Boy you are hard to keep up with Loving the engine swap, you had me at Ferrari, no need to explain further? Turbos are sweet. Is that aluminum tubing you bent for them or painted styrene?? Either way wonderful work Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted January 28, 2020 Author Share Posted January 28, 2020 18 hours ago, Twokidsnosleep said: Boy you are hard to keep up with Loving the engine swap, you had me at Ferrari, no need to explain further? Turbos are sweet. Is that aluminum tubing you bent for them or painted styrene?? Either way wonderful work LOL....hard keeping up with myself sometimes! That silver tubing is silver solder....its easier for tight bends, and slight manipulations. Thanks for stopping in, Bud!!, i will be back to this one pretty soon. There has been ALOT of kits/parts that i've been trying get painted, so that i only have to klean the model room once, then i have ALOT of things to assemble....an assault of updates coming!! LOL Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted February 21, 2020 Author Share Posted February 21, 2020 (edited) Hey, everyone!, time for an update here as well. I decided to take a break from the engine, and finish the body. Since i dont need to have the body for engine fitment anymore, i can now paint it, and install the finished interior, and windows even!! As soon as i finish the last couple of things on the Miura body, i will paint this, and my Fujimi Pantera bodies with it. -Photo 1; I tried to sharpen up the door handels because after the painting process they would look fake, but it didnt work, so i made my own out of thin sheet styrene -now i'm happy. -Photo 2&3; Like all the Ferrari F-40 kits, this one suffers from not having the body flow seamlessly into the sail panel vents. I cut the appropriate bits from the interior tub piece, and spliced them in to fix the issue. -Photo 4; After filling in the little corner gaps of the rockers with styrene, all the body bits are ready for the painting process! Edited February 21, 2020 by Dann Tier Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted March 12, 2020 Author Share Posted March 12, 2020 Hey, everyone!, the primer was added yesterday, and i will be shooting the Chrome Yellow today! Quote Link to comment Share on other sites More sharing options...
Ben Brown Posted March 12, 2020 Share Posted March 12, 2020 I completely missed your Feb 21 post! Looking good! Ben Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted March 13, 2020 Author Share Posted March 13, 2020 3 hours ago, Ben Brown said: I completely missed your Feb 21 post! Looking good! Ben Thanks, Ben!...i will have the yellow done tomorrow! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 14, 2020 Author Share Posted April 14, 2020 Hey, everyone!, i finally have kolor on this bad boy!, next step is decals, and clear coat. I will continue finishing off the body, so that i can perminantly install the interior which as you know, has been done for quite some time. It is not needed for engine fitment anymore. Even the door handles i made turned out way better than the molded in ones. Quote Link to comment Share on other sites More sharing options...
randyc Posted April 14, 2020 Share Posted April 14, 2020 Wow! Looks great! Quote Link to comment Share on other sites More sharing options...
Belugawrx Posted April 14, 2020 Share Posted April 14, 2020 Nice colour there Dann I see you have the workbench merry go round running again..10 builds on the front page WOW More power to ya buddy ! Cheers Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 14, 2020 Author Share Posted April 14, 2020 8 hours ago, randyc said: Wow! Looks great! Thanks alot, Bud! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 14, 2020 Author Share Posted April 14, 2020 8 hours ago, Belugawrx said: Nice colour there Dann I see you have the workbench merry go round running again..10 builds on the front page WOW More power to ya buddy ! Cheers LOL!...it sure is!! -thanks, Bud!!! Quote Link to comment Share on other sites More sharing options...
Ben Brown Posted April 15, 2020 Share Posted April 15, 2020 I like it!! Ben Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 16, 2020 Author Share Posted April 16, 2020 11 hours ago, Ben Brown said: I like it!! Ben Thanks, Ben! Quote Link to comment Share on other sites More sharing options...
Art Laski Posted April 16, 2020 Share Posted April 16, 2020 Nice to see you still making progress on it, Dann! The improvements you've made will be well worth the effort. Nice work all around. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 16, 2020 Author Share Posted April 16, 2020 3 hours ago, Art Laski said: Nice to see you still making progress on it, Dann! The improvements you've made will be well worth the effort. Nice work all around. Thanks, Bud!....i will clear it in a day or so! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 19, 2020 Author Share Posted April 19, 2020 Now that i applied the bonnet decal, i can clear the body tomorrow....then the trim work! Quote Link to comment Share on other sites More sharing options...
beeRS Posted April 19, 2020 Share Posted April 19, 2020 This is looking great Dann. I especially like what you did with the door handles. Much better than the original. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 23, 2020 Author Share Posted April 23, 2020 On 4/19/2020 at 6:54 AM, beeRS said: This is looking great Dann. I especially like what you did with the door handles. Much better than the original. Thanks, Bud! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted April 23, 2020 Author Share Posted April 23, 2020 The gray accents, and decals are on, and final clear coat has been too!...i'm now working on all the lights, and glass. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.