DPNM Posted May 14, 2019 Share Posted May 14, 2019 I've hit a bit of a snag on the AMTronic model I have been working on. I joined this CBP way back at the beginning. I've worked on it off and on. It has frustrated me. I had cut a good portion of the back half out to shorten it. Since then I've found that I really need to glue the pieces together so I can work on it but I can't as then I will not be able to do anything on the interior, like spray paint it or add any details, which I had planned to do. Here's my dilemma, I got the box out to work on it today, I like abuse I guess. Come to find out I have misplaced the bottom section of the rear. I have searched for it, and so far, I can not find it. I've searched in it's boxes, the boxes of other models I have started and around various areas of the house. I keep a waste basket beside my build desk, it may have fallen in there without me knowing. That was about three empty's ago. I think I have til the end of the year to finish this, correct? I'm gonna look for another kit at a reasonable price and I do plan to get it done. I will not be shortening it this time though, it may go a little easier. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted May 15, 2019 Author Share Posted May 15, 2019 16 hours ago, DPNM said: I think I have til the end of the year to finish this, correct? I'm gonna look for another kit at a reasonable price and I do plan to get it done. I will not be shortening it this time though, it may go a little easier. Correct. This build off runs until December 1st. Good luck finding a second kit. Guys, I just don't think I'm gonna be participating this year. One, I'm seriously busy at work and at home. And two, and my interest in the theme this year is very low. I'll continue to moderate and cheer you guys on, but likely no plastic from me. We'll see what next year brings. Quote Link to comment Share on other sites More sharing options...
DPNM Posted May 16, 2019 Share Posted May 16, 2019 11 hours ago, Jantrix said: Good luck finding a second kit. I found one for a decent price on feeBay. Hope to have it by the end of the week. I will be redesigning from my original idea. Quote Link to comment Share on other sites More sharing options...
landman Posted May 19, 2019 Share Posted May 19, 2019 On 5/14/2019 at 5:22 PM, DPNM said: I've hit a bit of a snag on the AMTronic model I have been working on. I joined this CBP way back at the beginning. I've worked on it off and on. It has frustrated me. I had cut a good portion of the back half out to shorten it. Since then I've found that I really need to glue the pieces together so I can work on it but I can't as then I will not be able to do anything on the interior, like spray paint it or add any details, which I had planned to do. Here's my dilemma, I got the box out to work on it today, I like abuse I guess. Come to find out I have misplaced the bottom section of the rear. I have searched for it, and so far, I can not find it. I've searched in it's boxes, the boxes of other models I have started and around various areas of the house. I keep a waste basket beside my build desk, it may have fallen in there without me knowing. That was about three empty's ago. I think I have til the end of the year to finish this, correct? I'm gonna look for another kit at a reasonable price and I do plan to get it done. I will not be shortening it this time though, it may go a little easier. Sad to hear your predicament. I wonder how many of us have had something just disappear like that. Quote Link to comment Share on other sites More sharing options...
DPNM Posted May 19, 2019 Share Posted May 19, 2019 4 hours ago, landman said: Sad to hear your predicament. I wonder how many of us have had something just disappear like that. This was on my porch yesterday. I coulda put it in "What did you get today?" but I'd prefer most people don't know. I doubt that very many forum members have one, or have even heard of this kit. It is a good one to avoid if at all possible. Now I pretty much have two. Quote Link to comment Share on other sites More sharing options...
Rusty92 Posted May 19, 2019 Share Posted May 19, 2019 8 hours ago, DPNM said: This was on my porch yesterday. I coulda put it in "What did you get today?" but I'd prefer most people don't know. Well I’m glad you got another one. Shouldn’t matter if they care or not. I am excited to see your build. Quote Link to comment Share on other sites More sharing options...
DPNM Posted May 20, 2019 Share Posted May 20, 2019 32 minutes ago, Rusty92 said: Shouldn’t matter if they care or not. It's not that it matters if people care, it's more that I was embarrassed to own the first one . I'm going to give it my best shot. I will be modifying my original idea. 37 minutes ago, Rusty92 said: I am excited to see your build. Thank you for the nudge forward Jacob. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted May 28, 2019 Author Share Posted May 28, 2019 Guys I really have to apologize for being an absentee moderator for this build off. Things have been so busy on the farm lately that I haven't touched my model bench in a month or more. I'm usually much better at staying engaged and keeping people motivated and interested. It's just a bad year for modeling on the Mattis homestead. Also, I'm thinking that despite all the initial interest, the van theme has not been popular. From now on we'll decide the theme like we have the last few years, rather than making an executive decision. My apologies. Quote Link to comment Share on other sites More sharing options...
camaro69 Posted May 29, 2019 Share Posted May 29, 2019 Hi Rob, I don´t think that the theme isn´t popular. Maybe there are some other modelers (including me!) who doesn´t have any bench time too. For my part I want to build my 55 Ford Panel but didn´t have any time yet. I really hope the second half of the year becomes better. Greets, Rico Quote Link to comment Share on other sites More sharing options...
Rusty92 Posted May 29, 2019 Share Posted May 29, 2019 I enjoy the theme, it was very niche. But I understand some may not enjoy it. Quote Link to comment Share on other sites More sharing options...
Lunajammer Posted May 30, 2019 Share Posted May 30, 2019 I regret I've been conspicuously quiet and haven't joined this year. I like the category and would like to participate, kit in hand. I just haven't touched my bench since before Xmas. Quote Link to comment Share on other sites More sharing options...
DPNM Posted May 31, 2019 Share Posted May 31, 2019 On 5/28/2019 at 1:55 PM, Jantrix said: Also, I'm thinking that despite all the initial interest, the van theme has not been popular. From now on we'll decide the theme like we have the last few years, rather than making an executive decision. My apologies. Hey Rob, as far as I'm concerned you have nothing to apologize for. If this build wasn't van themed I doubt that I would have gotten involved. I had the AMTronic kit that I would probably have never done anything with. It seems "van-ish" to me so that's why I signed up. A part of it did vanish but oh well... Actually, I think I've found a better plan. As to your not being able to join in as you would like, life does have a way of changing ones plans. You have more important priorities to tend to. It happens. I hope things go well for you and yours. Quote Link to comment Share on other sites More sharing options...
LouO Posted May 31, 2019 Share Posted May 31, 2019 (edited) No need for any apologies, I personally think the theme is awesome! I've just mostly been working on my P2P build first. Edited May 31, 2019 by LouO Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted June 1, 2019 Share Posted June 1, 2019 Rob there is nothing wrong with the theme. I've been trying to finish up a few stalled projects. At the same time I've been planning my entry and gathering parts. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted June 3, 2019 Author Share Posted June 3, 2019 Very happy to hear this. Carry on my friends. Quote Link to comment Share on other sites More sharing options...
Oldmopars Posted June 6, 2019 Share Posted June 6, 2019 I do not think the theme was bad at all, I love the idea. I have been so busy with a 1:1 motorcycle build, riding, working and the B.R.B.O in the truck section, that my Van has been a little neglected. I did get some paint on it, but that is about it. Quote Link to comment Share on other sites More sharing options...
Oldmopars Posted June 7, 2019 Share Posted June 7, 2019 (edited) As I said before, progress has been slow. The B.R.B.O. in the truck area is keeping me busy. I am doing a tuck, trailer and Dozer to be done by month end. Anyway, I did get some color on the van From the beginning I have wanted this to look like a 70's van. So, the colors I chose are right on for the look I wanted. I have some orange,yellow, brown stripes from a 70's Dodge Ramcharger that will go on to finish the 70's look. I have a long way to go, and a short time to get there. But here it is for now. As you can see in the pictures, I have a few buggers to final sand out of the paint. I need to wait till it has dried for about a week before I do anything about those. This paint has to be really dry before I play with it. I learned the hard way. Edited June 7, 2019 by Oldmopars Quote Link to comment Share on other sites More sharing options...
Dominik Posted June 13, 2019 Share Posted June 13, 2019 cool stuff! your van screams really 70's Quote Link to comment Share on other sites More sharing options...
Aspieguy Posted June 24, 2019 Share Posted June 24, 2019 Man o' man you gents have my attention! I'm a HUGE van fan! Wish I could throw my hat in the ring but sadly funds do not allow. I'm coming up on a year of not working due to my mental health. Anyways I. Watching this thread!! Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted July 2, 2019 Share Posted July 2, 2019 (edited) Dang. Just realized only 5 months left. Where has the year gone? Have to get it going. Edited July 2, 2019 by bobthehobbyguy Quote Link to comment Share on other sites More sharing options...
LouO Posted July 3, 2019 Share Posted July 3, 2019 (edited) 76 Chevy Van (A-Team kit) 7/3/19 update With the P2P on hold I decided to focus on this build, since the A-Team kit offers an option to build it is a Chevy I decided to go that route (76 to be exact – based on the dashboard in the kit). I had a “blueprint” in my head, when "Vans" were chosen as the subject. So with only recently getting started, here are some of my changes and progress… Bottom of body (all casting marks, extra holes filled etc. ) & light texture painted (flat black). Frame stock cross-members removed/new-members installed, leaf springs removed/new rear – air adj sys will be built. Frame smoothed out, filled, primed, sanded numerous times and pained gloss black. While waiting for things to dry, I’ve been working on the body too. The upper and lower trim have been removed (still needs some perfection). Installed new rain gutters/smoothed to roof. Work to continue. The engine was fitted during frame assembly and if this were I real van I think it would make a real world good choice. Hint: http://www.superchevy.com/how-to/engines-drivetrain/sucp-0703-stealth-tpi-induction/ thoughts, opinions, comment - welcomed; stayed tuned (hopefully) for more updates Edited July 3, 2019 by LouO Quote Link to comment Share on other sites More sharing options...
oldcarfan Posted July 4, 2019 Share Posted July 4, 2019 On 6/3/2019 at 8:45 AM, Jantrix said: Very happy to hear this. Carry on my friends. Looks like you have a nice place! Our youngest will be a senior this next year and after that we are planning to move a bit north of Austin to a place similar to this. Quote Link to comment Share on other sites More sharing options...
disconovaman Posted July 8, 2019 Share Posted July 8, 2019 I can tell you that I was Gung-Go about this year's CBR theme. Last year I waited til about March to announce my entry and actually started in April. I planned on the same this year but I was undecided on what to build so I've been slow to announce this year's entry... I'm serious about what I want to build now I still need one more kit to actually start the ball rolling. once I get that, I still want in... (If it's not too late). Quote Link to comment Share on other sites More sharing options...
Jantrix Posted July 8, 2019 Author Share Posted July 8, 2019 On 7/4/2019 at 12:51 PM, oldcarfan said: Looks like you have a nice place! Our youngest will be a senior this next year and after that we are planning to move a bit north of Austin to a place similar to this. Thanks. I hope Austin works out for ya. It's a great life. 11 hours ago, disconovaman said: I can tell you that I was Gung-Go about this year's CBR theme. Last year I waited til about March to announce my entry and actually started in April. I planned on the same this year but I was undecided on what to build so I've been slow to announce this year's entry... I'm serious about what I want to build now I still need one more kit to actually start the ball rolling. once I get that, I still want in... (If it's not too late). Happy to hear it. Per our rules, you can join this CBP at ANY time up to 48 hours from the finish. Quote Link to comment Share on other sites More sharing options...
oldcarfan Posted July 21, 2019 Share Posted July 21, 2019 I'm declaring my entry finished. This Westie is powered by a Subaru WRX engine in order to get it up to the speeds needed to be competitive. She comes with a full load of electronic surveillance gear should allow it to keep up with any sticky issues and her three person crew is seated in comfort in Porsche seats. She is running lightweight wheels and Pirelli Centurato tires. She has two Cibie fog lights and an LED light bar. I worked in a couple of tributes to Brock Yates and his original Cannonball and One Lap races on the decal sheets. The roof carries four coms antennae for the scanners and two satellite dishes to power the Pear Computer laptops. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.