Casey Posted July 17, 2019 Share Posted July 17, 2019 Groovy...'bout time they used this box art: Quote Link to comment Share on other sites More sharing options...
Force Posted July 17, 2019 Share Posted July 17, 2019 (edited) Nice boxart...but I already have a couple from the last time it was re-issued so I think I'll pass. Edited July 17, 2019 by Force Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted July 17, 2019 Share Posted July 17, 2019 I missed it last time around. I'm in. Now if only someone would do the Swamp Rat. Quote Link to comment Share on other sites More sharing options...
Snake45 Posted July 18, 2019 Share Posted July 18, 2019 For every one of these kits built as Garlits' over the years, probably six to ten of them have been built as generic or phantom mid-'60s dragsters. You can always spot these builds because of the distinctive roll cage, which is longer and laid back at more of an angle than the typical dragsters of the day. Quote Link to comment Share on other sites More sharing options...
garagepunk66 Posted July 19, 2019 Share Posted July 19, 2019 On 7/17/2019 at 9:00 PM, Snake45 said: For every one of these kits built as Garlits' over the years, probably six to ten of them have been built as generic or phantom mid-'60s dragsters. You can always spot these builds because of the distinctive roll cage, which is longer and laid back at more of an angle than the typical dragsters of the day. You could easily pass one off as an Art Malone chassis, as Garlits and Malone frequently collaborated together and as such, often shared their innovations. Kellison, the dune buggy and kit car manufacturer, briefly got into the knocked-down dragster chassis kit game around 1964 and those designs are said to be a knock off of the typical contemporary Garlits chassis Quote Link to comment Share on other sites More sharing options...
Deuces Posted July 21, 2019 Share Posted July 21, 2019 Is this a 1/24 or 1/25 scale kit????...... Quote Link to comment Share on other sites More sharing options...
Force Posted July 21, 2019 Share Posted July 21, 2019 1:25 as most of the AMT kits are. Quote Link to comment Share on other sites More sharing options...
Chris in Berwyn Posted November 8, 2019 Share Posted November 8, 2019 I see it’s out now. Love the box art, especially where it says “replica of”. Guess they thought a lot of people would be expecting the real Wynn’s Jammer in that little box! Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted November 8, 2019 Share Posted November 8, 2019 On 7/17/2019 at 7:00 PM, Snake45 said: For every one of these kits built as Garlits' over the years, probably six to ten of them have been built as generic or phantom mid-'60s dragsters. You can always spot these builds because of the distinctive roll cage, which is longer and laid back at more of an angle than the typical dragsters of the day. Quite true, I don't think I have ever even built this kit box stock! Quote Link to comment Share on other sites More sharing options...
russosborne Posted November 11, 2019 Share Posted November 11, 2019 Does this one come with the clear body? Thanks, Russ Quote Link to comment Share on other sites More sharing options...
Casey Posted November 11, 2019 Author Share Posted November 11, 2019 9 hours ago, russosborne said: Does this one come with the clear body? FEATURES: 1/25 scale, skill 2, paint and cement required World’s first 200 MPH dragster Body panels molded in translucent smoke tint plastic - first time ever Includes bonus display base with metallic gold placard labels Pre-lettered drag slicks Authentic all new, expanded decal sheet Retro Deluxe™ reproduction vintage “rare" AMT packaging Quote Link to comment Share on other sites More sharing options...
Snake45 Posted November 11, 2019 Share Posted November 11, 2019 5 hours ago, Casey said: Body panels molded in translucent smoke tint plastic - first time ever Now that could be interesting. Might look better than clear. I think I'm gonna hafta get another one of these. Quote Link to comment Share on other sites More sharing options...
russosborne Posted November 13, 2019 Share Posted November 13, 2019 Thanks. Not sure about it, but it's worth buying one to see how it looks. Russ Quote Link to comment Share on other sites More sharing options...
Bainford Posted November 13, 2019 Share Posted November 13, 2019 (edited) On 11/11/2019 at 11:17 AM, Casey said: FEATURES: Body panels molded in translucent smoke tint plastic - first time ever I'm not sure I get this. What's the point? Neither clear nor smoked tint is correct, but at least clear panels are used under the auspices of being able to view the details hidden underneath. It's a silly idea, suitable for toys but not authentic models, yet enough people fall for this idea that it pops up from time to time as a clear body, hood, roof panel or chassis panel. But smoke tinted panels are not only incorrect, they also do not permit viewing the hidden details. It fails on both counts. Sure, it can be painted, but nevertheless what's the point? Edited November 13, 2019 by Bainford Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted November 13, 2019 Share Posted November 13, 2019 2 hours ago, Bainford said: I'm not sure I get this. What's the point? Neither clear nor smoked tint is correct, but at least clear panels are used under the auspices of being able to view the details hidden underneath. It's a silly idea, suitable for toys but not authentic models, yet enough people fall for this idea that it pops up from time to time as a clear body, hood, roof panel or chassis panel. But smoke tinted panels are not only incorrect, they also do not permit viewing the hidden details. It fails on both counts. Sure, it can be painted, but nevertheless what's the point? The Point is that these Model Kits where intended for young kids, not us old Kids. When I was a kid, I thought things like that where pretty cool. And, if you paint the body from the inside, it comes out really nice! Just don't primer the inside! Quote Link to comment Share on other sites More sharing options...
Shon Wittenbarger Posted November 13, 2019 Share Posted November 13, 2019 5 hours ago, Daddyfink said: The Point is that these Model Kits where intended for young kids, not us old Kids. When I was a kid, I thought things like that where pretty cool. And, if you paint the body from the inside, it comes out really nice! Just don't primer the inside! You make a good point. These kits are aimed at kids, that is the same thing I think when someone complains about something being off. They are model kits, toys to some. Not real car's, they were made to have fun with. Quote Link to comment Share on other sites More sharing options...
250 Testa Rossa Posted November 15, 2019 Share Posted November 15, 2019 I'll be getting one of these, regardless. Quote Link to comment Share on other sites More sharing options...
iBorg Posted November 15, 2019 Share Posted November 15, 2019 I'm curious about the decals....I've got a case of these from a prior issue. Quote Link to comment Share on other sites More sharing options...
TonyK Posted November 15, 2019 Share Posted November 15, 2019 I built a Tamiya kit with a clear body just because I wanted to do something different. Quite a challenge. I still painted certain body pieces and you need to use epoxy or other clear glue so as not to mar the clear plastic. I believe I built the Richard Petty big scale model as a kid and thought that was pretty cool. As pointed out, I was a kid so wasn't concerned with realism. Quote Link to comment Share on other sites More sharing options...
Dave Toups Posted November 18, 2019 Share Posted November 18, 2019 On 11/14/2019 at 9:03 PM, iBorg said: I'm curious about the decals....I've got a case of these from a prior issue. I just picked one up yesterday. The decals are probably the best part of this reissue. Round 2 has completely re-done the sheet to make it more accurate. Previous issues, even going back to the original "Checker Flag" kit have been incorrect in the lettering style. The new ones look a lot better when compared to the photo on the original box and pics of the restored car in Garlits' museum. As a nice additional touch, they also included the information stickers for the display base that haven't been included since the 60's Quote Link to comment Share on other sites More sharing options...
niteowl7710 Posted November 18, 2019 Share Posted November 18, 2019 On 11/13/2019 at 6:56 PM, Shon Wittenbarger said: You make a good point. These kits are aimed at kids, that is the same thing I think when someone complains about something being off. They are model kits, toys to some. Not real car's, they were made to have fun with. And what kid in 2019 even knows who Don Garlits is, or wants to build a mediocre old drag racing kit. This is aimed squarely at adult builders tugging on their nostalgia (or mistalgia) heart strings - making them buy another one of something they already have a half dozen of laying around. Quote Link to comment Share on other sites More sharing options...
DukeE Posted November 18, 2019 Share Posted November 18, 2019 Kinda cynical about life there, wow. It's for fun, it looks like the 1:1, and is better than the previous issues. Star Trek stuff and licensing will pay for new car stuff soon enough. New decals look nice. I never liked FED's as kid, still don't like RED's. But the earlier streamlined stuff is cool. Far more kids into cars know who Garlits, Petty, the greats are. If it's on YouTube, they know it. Quote Link to comment Share on other sites More sharing options...
Casey Posted November 18, 2019 Author Share Posted November 18, 2019 9 hours ago, Dave Toups said: I just picked one up yesterday. The decals are probably the best part of this reissue. Round 2 has completely re-done the sheet to make it more accurate. Previous issues, even going back to the original "Checker Flag" kit have been incorrect in the lettering style. The new ones look a lot better when compared to the photo on the original box and pics of the restored car in Garlits' museum. Looks to me like the font still isn't quite correct, especially the spacing between each letter. The lack of negative space inside the "D" and "G" on the new decal sheet is particularly noticeable. Quote Link to comment Share on other sites More sharing options...
DukeE Posted November 18, 2019 Share Posted November 18, 2019 Yeah, missed that, not easiest to fix. Found this today Quote Link to comment Share on other sites More sharing options...
Slick Shifter Posted November 18, 2019 Share Posted November 18, 2019 Not seeing the red outline around 'Wynn's Jammer' on the Hot Rod cover and it's missing the 1964 United States Drag Team decal & 'Garlits' above it.. The fonts are also 2 sizes here. It appears that the US Drag Team decals were short-lived. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.