Post your truck mockups.

[Mattilacken]

An updated mock-up .

[dino246gt]

Here's one I converted from a Revell 109.

From a 4 door station wagon into a 2 door pickup:

 

Edited June 19, 2024 by dino246gt

[dino246gt]

Here's how that one turned out, tires are hard resin, brush painted with Tamiya acrylic "rubber black".

 

[Ulf]

On 6/18/2024 at 11:53 PM, Mattilacken said:

An updated mock-up .

Looks very promising, you won't be able to finish by next week ?

[Mattilacken]

1 hour ago, Ulf said:

Looks very promising, you won't be able to finish by next week ?

Thanks! Whats happening next week?

[Ulf]

2 minutes ago, Mattilacken said:

Thanks! Whats happening next week?

GGG, Borensberg

[Tom Geiger]

A neat old Jeep I saw on St Thomas.  It was stretched and a local pickup box was put on the back. But the more I looked at the pictures, the more I was thinking  "Hey I could build that!" You know that haunting feeling that won't go away.

Started playing with cardboard before committing the design to plastic. This is over a stretched chassis

Then we used the NNL East 1/25 scale and centering tool to do the job!

Started with the seat area...

Then fabricated the box...

Since I just had 2 photos, I had to work proportions to get the right look

And here we are today..  It's fun to play with plastic!

[Iraceitall]

On 5/15/2022 at 10:40 AM, 2doors3pedals said:

These are four I've been working on this year.  They are a little past "mock up" but still in progress. 

I clearly need to focus!

Where did you find the Jeep Gladiator grille parts?

[2doors3pedals]

8 hours ago, Iraceitall said:

Where did you find the Jeep Gladiator grille parts?

Model Car Ranch has the facia and grill parts. The item is listed as out of stock, but you can still order one. 

Please post some photos of your project when it's finished. 

[Iraceitall]

On 6/25/2024 at 12:23 AM, 2doors3pedals said:

Model Car Ranch has the facia and grill parts. The item is listed as out of stock, but you can still order one. 

Please post some photos of your project when it's finished. 

Thank you! Now I need to order a Honcho!

Edited June 27, 2024 by Iraceitall
Didn't mean to quote all the pics.

[Iraceitall]

Thanks! Now I need to order a Honcho!

[Iraceitall]

On 6/25/2024 at 12:23 AM, 2doors3pedals said:

Model Car Ranch has the facia and grill parts. The item is listed as out of stock, but you can still order one. 

Please post some photos of your project when it's finished. 

How do I order one if they're out?, I'd love to, just wondering how to go about it...

[2doors3pedals]

Resin Model Ranch's web site directs us to email them (rmr@gmail.com) to inquire about availability and time frame for parts listed as not available. 

I have found them to be responsive and reliable. Good luck!

[Bullybeef]

One from the idea board. Just have to put up the $$ for the gmc w/t grille to set the transformation.

[mrm]

3 hours ago, Bullybeef said:

One from the idea board. Just have to put up the $$ for the gmc w/t grille to set the transformation.

I have the extended cab 3500 version in the works. I haven't started a thread about it, but maybe I should. 

[Bullybeef]

Just a couple of wrecks from the parts bins, had some ideas late one night and these kinda fell out of a box. We will see if anything good comes of one or maybe both 

[Steve H]

Hey… I forgot we a truck mock up section! Nothing new here, this is the build I have underway as a tribute to Plowboy (Roger Hayes)

[Keef]

Just some trucks I’ve been working with off and on.

[Gary Chastain]

Playing around with an idea that is not a semi truck for a change. 

[dino246gt]

After getting all the chassis and running gear in place, it's time to set up the body:

[Speedpro]

Here is a AMT '95 S-10 pro street p/u. Kit bashed with the soft seal '57 chevy pro sportsman.

 

 

 

 

 

[dust collectors]

My brothers came down last weekend for a visit and one of them helped me thin the stash a little bit. I gave him my 78 blazer kit and a 1/24 nascar kit to go under it. We got the wheel base and ride height dialed and he'll be finishing it at his place.

Edited March 18 by dust collectors

[carsntrucks4you]

My current project is a 1961 Ford F100 Utility. cab is from Dan's Models before Moebius brought the F100 on the market. Utility box from a 1965 F100. Chassis, rims and twin turbo Coyote engine are 3d printed.

[Steve H]

On 3/16/2025 at 8:11 AM, Speedpro said:

Here is a AMT '95 S-10 pro street p/u. Kit bashed with the soft seal '57 chevy pro sportsman.

 

 

 

 

 

Oh yeah….  Very cool Paul. That is ALOT of motor shoehorned in there!

[RIXprints]

My Ford truck is chopped, channeled and sectioned. The axles have been moved to sit on top of the leaf springs to lower it further.