Can-Con Posted January 1 Share Posted January 1 Humm, might have to throw my X-acto knife into the ring this year, if I may. I think a Revell '83 Olds 442 will do nicely. 😈 4 Quote Link to comment Share on other sites More sharing options...
Camaro lover Posted January 1 Share Posted January 1 I’ve got a 67 Camaro I built years ago that I’ve never been happy with. My plan is to pull it apart give it a purple bath and rebuild the whole car with some modern upgrades. As soon as I gather all the modern bits I’ll post a picture of what I’ll be starting with. 3 Quote Link to comment Share on other sites More sharing options...
Beans Posted January 1 Share Posted January 1 3 hours ago, MeatMan said: Marked my chassis for the necessary cuts and realized that there won't be a whole lot left of the floorpan afterwards. Adding a pic of my "junkyard" engine. Checked the compression and oil pressure and all looks good. Six speed tranny came with it but will necessitate cutting the tranny tunnel out. On to the cutting! I was going back and forth thinking about using this kit when you jumped in. After looking at the frame I was glad you made up my mind for me. I was not looking forward to the molded in detail removal. Will definitely be following your progress. Can't wait to see what you do. Quote Link to comment Share on other sites More sharing options...
disconovaman Posted January 1 Share Posted January 1 1 hour ago, Camaro lover said: My plan is to pull it apart give it a purple bath and rebuild the whole car with some modern upgrades. So literally Restomodding an old model build. Awesome Idea! I recommended the Rebuilders theme for the CBR so I'm interested is seeing what you do. Quote Link to comment Share on other sites More sharing options...
Beans Posted January 1 Share Posted January 1 Waiting on my base kit to show up. Scavenging the engine and some parts from this kit. 4 Quote Link to comment Share on other sites More sharing options...
oldcarfan Posted January 2 Share Posted January 2 It will be a couple of days before I can go through my kit pile, but I have a couple of ideas and should have an entry by the end of the week. It says production engines, I may have missed it, but do they need to be from the same manufacturer? Say a 2JZ, Hellcat, or LS transplant into a different brand? Quote Link to comment Share on other sites More sharing options...
kermn8r Posted January 2 Share Posted January 2 Count me in with a smooth riding, all powerful land yacht 1959 Cadillac Eldorado Biarritz. It is probably too early for livery, but I am toying with something along the lines of a John Player Special scheme. 2 Quote Link to comment Share on other sites More sharing options...
White Rabbit Posted January 2 Author Share Posted January 2 1 hour ago, oldcarfan said: It will be a couple of days before I can go through my kit pile, but I have a couple of ideas and should have an entry by the end of the week. It says production engines, I may have missed it, but do they need to be from the same manufacturer? Say a 2JZ, Hellcat, or LS transplant into a different brand? The engine choice is up to you. As the guidelines state, the engine would ideally be from the same manufacturer, but it's not obligatory. Quote Link to comment Share on other sites More sharing options...
White Rabbit Posted January 2 Author Share Posted January 2 (edited) Updated Entry List: 1990 Ford Mustang (Fat Brian) 1974 Plymouth GTX (Lunajammer) VW Golf MK2 (stitchdup) 1975 AMC Gremlin (Tim08) Nissan 240ZG (Spottedlaurel) 1957 Ford Fairlane (MeatMan) 1965 Buick Riveira (Keef) 1990 Ford Mustang LX (53gmc) 1967 Pontiac GTO (Pat Minarick) 1966 Ford Mustang (beans) pending 1986 Chevrolet Monte Carlo SS (Disconovaman) 1998 Chevrolet Camaro Z28 (Westrods) 1966 Chevrolet Chevelle Wagon (atomicholiday) 1983 Oldsmobile 442 (Can-Con) 1967 Chevrolet Camaro (Camaro lover) pending 1959 Cadillac Eldorado Biarritz (Kermn8r) Edited January 2 by White Rabbit 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted January 2 Share Posted January 2 1 hour ago, White Rabbit said: Updated Entry List: 1990 Ford Mustang (Fat Brian) 1974 Plymouth GTX (Lunajammer) VW Golf MK2 (stitchdup) 1975 AMC Gremlin (Tim08) Nissan 240ZG (Spottedlaurel) 1957 Ford Fairlane (MeatMan) 1965 Buick Riveira (Keef) 1990 Ford Mustang LX (53gmc) 1967 Pontiac GTO (Pat Minarick) 1966 Ford Mustang (beans) pending 1986 Chevrolet Monte Carlo SS (Disconovaman) 1998 Chevrolet Camaro Z28 (Westrods) 1966 Chevrolet Chevelle Wagon (atomicholiday) 1983 Oldsmobile 442 (Can-Con) 1967 Chevrolet Camaro (Camaro lover) pending 1959 Cadillac Eldorado Biarritz (Kermn8r) Can. A 70 Super Bee 🐝 Pro street be used? Still trying to decide if I want to enter and what to enter? 4 Quote Link to comment Share on other sites More sharing options...
atomicholiday Posted January 2 Share Posted January 2 5 hours ago, slusher said: Can. A 70 Super Bee 🐝 Pro street be used? Still trying to decide if I want to enter and what to enter? I hope you do decide to join in, Carl. Looking forward to having you be a part of the fun. 1 1 Quote Link to comment Share on other sites More sharing options...
atomicholiday Posted January 2 Share Posted January 2 Got the Chevelle washed and ready for clean up this morning. That may be as far as I get until Thursday. Next few days will be busy. Tomorrow we’re taking my daughter to the airport. Back to school. I miss her already and she isn’t even gone yet. 3 Quote Link to comment Share on other sites More sharing options...
White Rabbit Posted January 2 Author Share Posted January 2 10 hours ago, slusher said: Can. A 70 Super Bee 🐝 Pro street be used? Still trying to decide if I want to enter and what to enter? The '70 Super Bee itself is within this year's theme. However, the Pro Street part is going to fall into the extreme performance realm, which would not be part of the Restomods theme. As for the kit, it depends on the modifications made; that is, if the chassis is tubbed or has a bespoke race chassis, then that would not be permissible. Quote Link to comment Share on other sites More sharing options...
Spottedlaurel Posted January 2 Share Posted January 2 Some great progress already being made! Mine has got no further than planning in my head (or daydreaming, as it might more accurately be known) and rummaging through the box. However I'm determined not to start anything new untiI get one other WIP off my bench. Been looking at a couple of fantastic builds of the 240ZG here on MCM - the Tamiya kit I've chosen really deserves to be done properly, with some detailing that's a step or two beyond what I've done before. I probably wouldn't have thought about going so far if I hadn't entered this group build, in the same way that I would never have built my previous couple of CBR competitors otherwise. It'll be good to stretch myself a little bit and go slightly outside of my normal comfort zone. Quote Link to comment Share on other sites More sharing options...
Tim08 Posted January 3 Share Posted January 3 19 hours ago, kermn8r said: Count me in with a smooth riding, all powerful land yacht 1959 Cadillac Eldorado Biarritz. It is probably too early for livery, but I am toying with something along the lines of a John Player Special scheme. The JPS scheme would look great on that cadi! Never watched allot of F1 but loved the JPS cars ever since I was kid. Quote Link to comment Share on other sites More sharing options...
disconovaman Posted January 3 Share Posted January 3 20 hours ago, kermn8r said: John Player Special That would look Awesome, especially with the gold wheels. Good luck with it, that's alot of real estate. Quote Link to comment Share on other sites More sharing options...
Fat Brian Posted January 3 Share Posted January 3 The wheel faerie paid me a visit today and left me some options to choose from, 18" Ponies or 20" 2000s stock style. I'm leaning toward the 2000s wheels, the Ponies have a bit too much tire but would be perfect on a 1/24 kit. 2 Quote Link to comment Share on other sites More sharing options...
Pat Minarick Posted January 3 Share Posted January 3 Trying to make the Chevelle interior at least look like a stock GTO. 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted January 3 Share Posted January 3 20 hours ago, White Rabbit said: The '70 Super Bee itself is within this year's theme. However, the Pro Street part is going to fall into the extreme performance realm, which would not be part of the Restomods theme. As for the kit, it depends on the modifications made; that is, if the chassis is tubbed or has a bespoke race chassis, then that would not be permissible. What years of cars allowed sir, would help me make a choice? Quote Link to comment Share on other sites More sharing options...
disconovaman Posted January 3 Share Posted January 3 Just now, slusher said: What years of cars allowed vehicles built from 1903 to 2004 are permitted. Quote Link to comment Share on other sites More sharing options...
slusher Posted January 3 Share Posted January 3 8 minutes ago, disconovaman said: vehicles built from 1903 to 2004 are permitted. Thank you, sir I do appreciate the quick reply.. 1 Quote Link to comment Share on other sites More sharing options...
Beans Posted January 3 Share Posted January 3 10 hours ago, Fat Brian said: The wheel faerie paid me a visit today and left me some options to choose from, 18" Ponies or 20" 2000s stock style. I'm leaning toward the 2000s wheels, the Ponies have a bit too much tire but would be perfect on a 1/24 kit. I agree on the 20"s. I don't get why aftermarket wheels always seem to be listed in 1/24 scale. When you get down to wheel and tire sizes the difference in scale is noticeable. Actual tire size seems to be an afterthought. But I'm just grumping... Still like the 20"s. Quote Link to comment Share on other sites More sharing options...
oldcarfan Posted January 3 Share Posted January 3 I think I've found my starter kit, this Monogram 1997 Ford Expedition. If I can find either the Revell Lightning kit or one of their 1997 F150 kits, I plan to put the Expedition body on that chassis and go crazy. You can see by the price tags that I've had this kit a long time. It's been up in my in-laws' barn attic for a very long time. I need to go back this weekend and see if I can find my other F150 kits. I'm thinking maybe turning it into an SUV Lightning maybe with modern Coyote power if that fits the guidelines. 3 Quote Link to comment Share on other sites More sharing options...
Lunajammer Posted January 3 Share Posted January 3 20 minutes ago, oldcarfan said: Monogram 1997 Ford Expedition That’s so old I don’t even remember it. Quote Link to comment Share on other sites More sharing options...
White Rabbit Posted January 3 Author Share Posted January 3 Updated Entry List: 1990 Ford Mustang (Fat Brian) 1974 Plymouth GTX (Lunajammer) VW Golf MK2 (stitchdup) 1975 AMC Gremlin (Tim08) Nissan 240ZG (Spottedlaurel) 1957 Ford Fairlane (MeatMan) 1965 Buick Riveira (Keef) 1990 Ford Mustang LX (53gmc) 1967 Pontiac GTO (Pat Minarick) 1966 Ford Mustang (beans) pending 1986 Chevrolet Monte Carlo SS (Disconovaman) 1998 Chevrolet Camaro Z28 (Westrods) 1966 Chevrolet Chevelle Wagon (atomicholiday) 1983 Oldsmobile 442 (Can-Con) 1967 Chevrolet Camaro (Camaro lover) pending 1959 Cadillac Eldorado Biarritz (Kermn8r) 1997 Ford Expedition (oldcarfan) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.