Jon Haigwood Posted October 15, 2017 Share Posted October 15, 2017 Has anyone done a side by side comparison of the AMY Rnd2 49 Ford Convert kit and the 50 Ford Coupe Kit ? Just wandering Quote Link to comment Share on other sites More sharing options...
mike 51 Posted October 15, 2017 Share Posted October 15, 2017 The convertible is a 50 and the coupe is a 49......for a start. Quote Link to comment Share on other sites More sharing options...
RichCostello Posted October 15, 2017 Share Posted October 15, 2017 It's the other way around, Jon.The 49 is the coupe, and the 50 is the convert. Quote Link to comment Share on other sites More sharing options...
RichCostello Posted October 15, 2017 Share Posted October 15, 2017 The convertible is a 50 and the coupe is a 49......for a start. Great minds think alike. Quote Link to comment Share on other sites More sharing options...
mike 51 Posted October 15, 2017 Share Posted October 15, 2017 The convertible kit had lots of cutom parts.The coupe was more of a 3n1 with a Cadillac engine and a few custom parts.Both are nice kits.. Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 15, 2017 Author Share Posted October 15, 2017 (edited) The convertible is a 50 and the coupe is a 49......for a start. Mind Fart Sorry They look to be the same body except for the side molding were the badging is and the trunk hinges Edited October 15, 2017 by Jon Haigwood Quote Link to comment Share on other sites More sharing options...
Force Posted October 15, 2017 Share Posted October 15, 2017 The 50 has a fuel door on the drivers side quarter panel and the 49 do not as it has a visible fuel cap. Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted October 15, 2017 Share Posted October 15, 2017 Door handles are different as well, IIRC. I had a '50 coupe conversion in the works once that I was building as the Turnupseed car, and I remember deciding it would just be easier to swap the '49 roof onto the '50 body. Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 15, 2017 Author Share Posted October 15, 2017 (edited) My plan is to do something similar to the Gibbons Kopperhead 50 but not try to just duplicate it. I am thinking about taking the Deville roof from the convert kit and using it as the back half of the 50 roof. Not sure if I will need to lengthen the doors. Edited October 15, 2017 by Jon Haigwood Quote Link to comment Share on other sites More sharing options...
espo Posted October 15, 2017 Share Posted October 15, 2017 With one exception I believe that almost everything will interchange between the kits. The only minor problem will come about switching frames and interiors. The '49 coupe has a shorter floor board because of the body style and the frame portion of the floor boards are longer so that they match up. If you go to the '50 Convertible the interiors floor boards are longer and the frames portion are shorter. The interiors are different lengths but the seats and dashes all inter change. Not a big deal and easily changed as needed. Quote Link to comment Share on other sites More sharing options...
Don Sikora II Posted October 16, 2017 Share Posted October 16, 2017 My plan is to do something similar to the Gibbons Kopperhead 50 but not try to just duplicate it. I am thinking about taking the Deville roof from the convert kit and using it as the back half of the 50 roof. Not sure if I will need to lengthen the doors. Good idea! Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted October 16, 2017 Share Posted October 16, 2017 My plan is to do something similar to the Gibbons Kopperhead 50 but not try to just duplicate it. I am thinking about taking the Deville roof from the convert kit and using it as the back half of the 50 roof. Not sure if I will need to lengthen the doors. I like the looks of that ☝️! Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 16, 2017 Author Share Posted October 16, 2017 I like the looks of that ☝️!I wish I could find more pictures and information on it Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted October 16, 2017 Share Posted October 16, 2017 I wish I could find more pictures and information on it I had a magazine with an article on it, but it's buried the the storage area I have models stashed in, but everything is buried behind stuff that belong to my Dad and Sister to the point I can barely get in the locker........amazing looking car and I'm kinda surprised there isn't a resin body for this. Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted October 16, 2017 Share Posted October 16, 2017 (edited) The '49 coupe kit has the nicer chassis, with separate dual exhaust systems, as opposed to a molded-in single exhaust system on the '50 convertible. When I'm inclined to go full detail I tend to start with the '49 kit chassis whether it's a coupe or convertible, but this generates a surplus of '50 chassis which I tend to use up when the external appearance is mainly what counts. The earliest releases of the '50 convertible come with an amazing number of customizing options and it's been a source of frustration that recent Round 2 re-issues haven't revived them all. For doing the Copperhead the '49 Coupe should do just fine, along with the '50 convertible kit stock grill which fits with no modification.This HRM Kopperhed article seems to have some detail to it, although you've probably found it already. From pictures #6 & #7 it looks like they lengthened the doors.:http://www.hotrod.com/articles/42141-1950-ford-five-window-coupe/ Edited October 16, 2017 by Bernard Kron Quote Link to comment Share on other sites More sharing options...
FordRodnKustom Posted October 16, 2017 Share Posted October 16, 2017 Agreeing with Bernard here......the '49 chassis is the better starting point of the two. Quote Link to comment Share on other sites More sharing options...
Bob Ellis Posted October 16, 2017 Share Posted October 16, 2017 The 1950 Ford was a Styline kit. The 1949 was a 3in1 with drag options. Some of these 1979-1982 issues have plastic axles that are NG. Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 16, 2017 Author Share Posted October 16, 2017 (edited) I was somewhat surprised at differance in the chassis between the two. The 50 has the cross frame and the 49 doesn't. I would like to find some photos or drawings of the underside of both cars in 1:1 scale. I once owned a 49 and a 51 and probably spent a lot of time underneath them but that was 50 years ago and I can't remember how they looked. Definitely like the 49 better. Edited October 16, 2017 by Jon Haigwood Quote Link to comment Share on other sites More sharing options...
dodgefever Posted October 16, 2017 Share Posted October 16, 2017 The 50 has the cross frame and the 49 doesn't.Because it's a convertible. Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 16, 2017 Author Share Posted October 16, 2017 Because it's a convertible.That makes sense Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 16, 2017 Author Share Posted October 16, 2017 The '49 coupe kit has the nicer chassis, with separate dual exhaust systems, as opposed to a molded-in single exhaust system on the '50 convertible. When I'm inclined to go full detail I tend to start with the '49 kit chassis whether it's a coupe or convertible, but this generates a surplus of '50 chassis which I tend to use up when the external appearance is mainly what counts. The earliest releases of the '50 convertible come with an amazing number of customizing options and it's been a source of frustration that recent Round 2 re-issues haven't revived them all. For doing the Copperhead the '49 Coupe should do just fine, along with the '50 convertible kit stock grill which fits with no modification.This HRM Kopperhed article seems to have some detail to it, although you've probably found it already. From pictures #6 & #7 it looks like they lengthened the doors.:http://www.hotrod.com/articles/42141-1950-ford-five-window-coupe/ Thanks for the link. There is a lot of good info and pictures there Quote Link to comment Share on other sites More sharing options...
randyc Posted October 16, 2017 Share Posted October 16, 2017 Here's my version of each. And yes, the black one is supposed to look like Billy Gibbons' Copperhead. Not sure where the engines came from - may not be kit pieces. They are about what you should expect from the original date of manufacture. And I think I did something like mentioned above on the black car. Quote Link to comment Share on other sites More sharing options...
Jon Haigwood Posted October 16, 2017 Author Share Posted October 16, 2017 Here's my version of each. And yes, the black one is supposed to look like Billy Gibbons' Copperhead. Not sure where the engines came from - may not be kit pieces. They are about what you should expect from the original date of manufacture. And I think I did something like mentioned above on the black car. Those look nice Quote Link to comment Share on other sites More sharing options...
Jantrix Posted October 16, 2017 Share Posted October 16, 2017 I've built the coupe and really enjoyed the kit. My only beef with it is the difficulty in getting it low in the rear. I used lowering blocks and "low-enuff" was the axle resting on the frame rails. A did a slight c-notch to make it a little more realistic, but it still has a forward rake. Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted October 17, 2017 Share Posted October 17, 2017 (edited) The '49 coupe kit has the nicer chassis, with separate dual exhaust systems, as opposed to a molded-in single exhaust system on the '50 convertible. When I'm inclined to go full detail I tend to start with the '49 kit chassis whether it's a coupe or convertible, but this generates a surplus of '50 chassis which I tend to use up when the external appearance is mainly what counts. The earliest releases of the '50 convertible come with an amazing number of customizing options and it's been a source of frustration that recent Round 2 re-issues haven't revived them all. For doing the Copperhead the '49 Coupe should do just fine, along with the '50 convertible kit stock grill which fits with no modification.This HRM Kopperhed article seems to have some detail to it, although you've probably found it already. From pictures #6 & #7 it looks like they lengthened the doors.:http://www.hotrod.com/articles/42141-1950-ford-five-window-coupe/ I doubt you will ever see the missing parts again (Skirts, fins, Vicky roof, etc). The Showboat issue replaced those parts with a straight axle and plastic drag slicks. The Carson top is still in the kit but is modified into a 'landau' half roof. The good news is there are plenty of inexpensive basket case originals on eBay. Edited October 18, 2017 by Dave Darby Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.