bill lanfear Posted April 22, 2021 Share Posted April 22, 2021 Well this is my 2nd model of the shiny kind. This is of course the Moebius Model King 69 Ford with the horrible grill. This is the one that got me started in making parts. It starting with the grill. I swapped out the straight six for a 390 from a 71 kit but had to fix the thermostat housing to be correct for the FE block. The door panels, rear lower trim, ranger scripts, starter solenoid, brake and gas pedals and slot wheels are also my own 3d printed parts and I scratched a few things like the headliner, wheel well trim and the dash pad. Parts box pieces are the steering wheel, tires, front bumper, and air cleaner. I hated how the tailights looked when the red pieces were placed in the chrome housings so I used red transparent paint applied in the chrome housings to get the recessed look I wanted. Anyways, I hope you enjoy it. It snowed this morning (April 21) so the pics were done inside with crappy lighting so bare with me on the quality. I didn't post a WIP on this one but feel free to ask if your curious about anything. Thanks for looking! Comments welcome! 1 Quote Link to comment Share on other sites More sharing options...
youpey Posted April 22, 2021 Share Posted April 22, 2021 absolutely terrific. this is an incredible build and looks amazing. great work. i love the rusted exhaust manifold and the dipstick. you dont see that hardly at all. Quote Link to comment Share on other sites More sharing options...
ChrisR Posted April 22, 2021 Share Posted April 22, 2021 Looks great! Quote Link to comment Share on other sites More sharing options...
David G. Posted April 22, 2021 Share Posted April 22, 2021 Great looking engine bay and interior detail. David G. Quote Link to comment Share on other sites More sharing options...
afx Posted April 22, 2021 Share Posted April 22, 2021 Very nice. Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted April 22, 2021 Share Posted April 22, 2021 Nice work, great details. Quote Link to comment Share on other sites More sharing options...
Steamboat Posted April 22, 2021 Share Posted April 22, 2021 Beautiful truck! Quote Link to comment Share on other sites More sharing options...
cobraman Posted April 22, 2021 Share Posted April 22, 2021 You did a great job ! Quote Link to comment Share on other sites More sharing options...
Hard_2_Handle_454 Posted April 23, 2021 Share Posted April 23, 2021 Super nice Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted April 23, 2021 Share Posted April 23, 2021 Looks great, well done! Quote Link to comment Share on other sites More sharing options...
Classicgas Posted April 23, 2021 Share Posted April 23, 2021 Very well done. Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted April 23, 2021 Author Share Posted April 23, 2021 On 4/21/2021 at 9:49 PM, youpey said: absolutely terrific. this is an incredible build and looks amazing. great work. i love the rusted exhaust manifold and the dipstick. you dont see that hardly at all. On 4/22/2021 at 3:02 AM, ChrisR said: Looks great! On 4/22/2021 at 6:57 AM, David G. said: Great looking engine bay and interior detail. David G. On 4/22/2021 at 7:18 AM, afx said: Very nice. On 4/22/2021 at 7:32 AM, mikemodeler said: Nice work, great details. On 4/22/2021 at 9:32 AM, Steamboat said: Beautiful truck! On 4/22/2021 at 1:11 PM, cobraman said: You did a great job ! 20 hours ago, Hard_2_Handle_454 said: Super nice 8 hours ago, PappyD340 said: Looks great, well done! 1 hour ago, Classicgas said: Very well done. Many Many thanks fellas! Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted April 23, 2021 Share Posted April 23, 2021 I just saw this! You sure did this kit justice! Great work! Quote Link to comment Share on other sites More sharing options...
BeakDoc Posted April 24, 2021 Share Posted April 24, 2021 Super nice looking Ford! Quote Link to comment Share on other sites More sharing options...
leafsprings Posted April 25, 2021 Share Posted April 25, 2021 Fantastic job on this '69 Ranger Bill! You once again captured the period look, tu tone paint, aluminum slot wheels, glass packs and very popular aftermarket goodies used in the 70's. Really like the grill detail work and factory stance and ride height, just the way it should be! Quote Link to comment Share on other sites More sharing options...
Monty Posted April 25, 2021 Share Posted April 25, 2021 Love how well that turned out. Nice job on the paint and detailing. Would you mind elaborating on the issues you had with the kit grille? Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted April 25, 2021 Author Share Posted April 25, 2021 On 4/23/2021 at 6:08 PM, Tom Geiger said: I just saw this! You sure did this kit justice! Great work! Very much appreciated Tom! 23 hours ago, BeakDoc said: Super nice looking Ford! Thank you Chris! Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted April 25, 2021 Author Share Posted April 25, 2021 1 hour ago, leafsprings said: Fantastic job on this '69 Ranger Bill! You once again captured the period look, tu tone paint, aluminum slot wheels, glass packs and very popular aftermarket goodies used in the 70's. Really like the grill detail work and factory stance and ride height, just the way it should be! Thank you Tom, I appreciate your comments. I had to fiddle with the suspension to get the right stance I was looking for. I also filled the rear peg holes for the bed and just mounted the bed with the rear raised to get the body lines to line up. Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted April 25, 2021 Author Share Posted April 25, 2021 23 minutes ago, Monty said: Love how well that turned out. Nice job on the paint and detailing. Would you mind elaborating on the issues you had with the kit grille? Thank you Monty! The Moebius 69 Ford kit grill has been talked about a lot on this forum. The grill used in the pics above is one of my own creations. The kit grill is VERY inaccurate and looks kind of awkward. The biggest issue on the kit grill is namely the headlight bezels. I think they are way too big. Over the course of a year and with the help of a few guys from this forum, namely Mike (MK11), I came up with what you see on this build to replace the one provided in the kit. Hope this helps, Bill Quote Link to comment Share on other sites More sharing options...
Deuces ll Posted April 25, 2021 Share Posted April 25, 2021 🙂👍 1 Quote Link to comment Share on other sites More sharing options...
mike 51 Posted April 25, 2021 Share Posted April 25, 2021 (edited) i especially like your fixed grille/headlight doors, if only Moebius had put just a little more effort into these kits ... Edited April 26, 2021 by mike 51 Quote Link to comment Share on other sites More sharing options...
Kromolly Posted April 25, 2021 Share Posted April 25, 2021 11 hours ago, bill lanfear said: Thank you Monty! The Moebius 69 Ford kit grill has been talked about a lot on this forum. The grill used in the pics above is one of my own creations. The kit grill is VERY inaccurate and looks kind of awkward. The biggest issue on the kit grill is namely the headlight bezels. I think they are way too big. Over the course of a year and with the help of a few guys from this forum, namely Mike (MK11), I came up with what you see on this build to replace the one provided in the kit. Hope this helps, Bill Bill, did you 3d print the grill? I'm really curious how you made it. It looks very accurate. I've owned a couple of '69 Ford pickups myself. Also curious about the exhaust, did you make that? If so, what is your technique for bending the tubing? I need to make similar exhaust for my '64 C20 project. Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted April 26, 2021 Author Share Posted April 26, 2021 11 hours ago, Kromolly said: Bill, did you 3d print the grill? I'm really curious how you made it. It looks very accurate. I've owned a couple of '69 Ford pickups myself. Also curious about the exhaust, did you make that? If so, what is your technique for bending the tubing? I need to make similar exhaust for my '64 C20 project. Hello Roy, the grill is 3d printed. I used to sell them and hopefully will again eventually. I sold lots of them so maybe you can find someone willing to give one up. The exhaust was a combination of spru bent with jewelry pliers and fat spru sanded down (mufflers) and then I used Q-tips tubing for the ends and just heated them very slightly and bent by hand then snipped off the ends. Hope this helps! Bill Quote Link to comment Share on other sites More sharing options...
thatz4u Posted April 26, 2021 Share Posted April 26, 2021 thanks for the exhaust.....tips.... Quote Link to comment Share on other sites More sharing options...
Biggu Posted April 26, 2021 Share Posted April 26, 2021 Spot on build, Bill..... just beautiful Jeff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.