kitbash1

Thanks Mike.

Great job on this older kit. What colour did you use for the over all colour of the car? I have this kit in my stash and was wondering.

I do both. I seal the paint with the first light coat of clear, let dry for a day then decal. Let the decals dry for a day the seal the decals with two light coats of clear, letting dry for an hour between coats.

I'm building this kit as well. Building it as the Moss / Jenkens car. I'm using Indycals decals but I've bought a set of wire wheels from Fernando Pinto. He has a set that will work on both the Targa Florio car and the Mililla Miglia cars.

He said it use to be a farm before the Motor Law. On Sunday's I elude the eye's and hop the turbine fright to fall outside the wire, where my white haired uncle waits...

Looks like the garbage that he sent me.

Done !

Okay. So I googled that site and watched the video 5 or 6 times until I finally under stood how it works. Instead of using fishing line I'm going to try fine wire in the jig I'm going to build, which will be a 48 spoke wheel.

I'm looking for a resin hood for a 70 Torino NASCAR build. The one in the Revell kit has the hood scoop and the stock car didn't run that hood. Any help would be greatly appricated.

If you can find any, Poly S Prussin Blue is a perfect match.

Edgar Winter Group with Bad Company at Maple Leaf Gardens. Best concert, The Guess Who with Lighthouse at the Canadian National Exibtion.

No. This work was done in 1978. I was out cold for the surgery. They gave me the two wisdom teeth that didn't shater to bit's. Like Mark's The roots on mine curved inwards. I still have those two teeth in the glass tube the hospital gave me.

I had mine pulled when I was 19. The dentist had the work done in the hospital, because two of the four were inpacting on the lower molars and were breaking them. The good thing was I was no longer in pain. The bad thing was I got addicted to Demeral pain killers. Our family doctor cut me off cold turkey, after I showed up at her office looking for another refill after three scripts for 30 day's worth.

I'll be watching this build as I also have the Brian Fawcett resin trans- kit. I also have the Thunder Valley Brake up-grade set and the SMS up-grade & Decal set. Once i finish my "Honey Do" list, I can get back to building and mybe get started on this one. Good luck on building this kit. I've heard others who have built it , that it took a long time to get parts to fit right.

I have the same kit sitting in my stash, but I want to do this livery the Players F3000 that ran in the Euro 3000 series. Since no one has ever produced these decals, I'm going to have to do them myself.

I've had my 94 Olds Cutless out of winter storeage for about a week or so. The 55 Olds Super 88 will be coming out of storeage in a week or so. It looks like there are going to be no car shows in Canada until July or Aug. this year, so I can get somemore work done on her.

The best Goodies sketch was the Pirate Radio Station and Post Office .They only had one record which was A walk in the Black Forest by Werner Kepher.

Since your a native New Yorker, I would have thought you'd be a Bosco fan like George Costanza.

Al Bundy with money and a very Hot Wife...

All you'll do is make a big toxic mess. The metal plates that are used for PE parts are like printing plates. They are coated with chemicals that must be exsposed to a light sorce to burn an image on the coated surface. Then you process the plate in an acid solution for a period of time to eat away the areas around the burned in image. And then you have to dip the PE in a fixing solution and then wash the part in water. Also have you figured out how your going to dispose the waste chemicals ? Because you just can't dump them down the kitchen sink. You Tube has some tutorials on this subject.

It's a dead ringer for Krylon Patriot Blue.

If you had bothered to read the post, I said it was for the month of Febuary. I was going on the premiss it was awarded on a monthly basis.

And the winner of the Darwin Award for Febuary 2020 is...

Do not get envolved with this company. I repeat, Do not get envolved with this company !!!!