stavanzer Posted March 26 Share Posted March 26 Jim S, love that build. Where did those wheels come from? Quote Link to comment Share on other sites More sharing options...
SpeedShift Posted March 27 Share Posted March 27 1 hour ago, stavanzer said: Jim S, love that build. Where did those wheels come from? They were an item at one time available from Replicas and Miniatures of Maryland (RM-98 1/25 Vintage Wire Wheels - $39.95). They included Norm's big & littles resin tires w/ Detail Master photo etched Kelsey Hayes wheels. A bit of a challenge to get the PE wire wheel front and backs put together but the effect is worth it. I would order more but they are discontinued, there must be unbuilt sets out there.... Quote Link to comment Share on other sites More sharing options...
stavanzer Posted March 27 Share Posted March 27 52 minutes ago, SpeedShift said: They were an item at one time available from Replicas and Miniatures of Maryland (RM-98 1/25 Vintage Wire Wheels - $39.95). They included Norm's big & littles resin tires w/ Detail Master photo etched Kelsey Hayes wheels. A bit of a challenge to get the PE wire wheel front and backs put together but the effect is worth it. I would order more but they are discontinued, there must be unbuilt sets out there.... Thanks! They looks great! Quote Link to comment Share on other sites More sharing options...
Jon Cole Posted March 28 Share Posted March 28 On 3/25/2024 at 11:31 PM, CabDriver said: "Revell didn’t exactly do a great job of figuring out a good looking roof chop for the (otherwise really nicely done) ‘49 Merc kit." True that! Quote Link to comment Share on other sites More sharing options...
stavanzer Posted March 28 Share Posted March 28 It will be very interesting to see what wheels, ect, Revell puts in the box for this version of the Sedan kit! I know my stash needs a couple of these. Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted March 28 Share Posted March 28 Something else the Sedan kit had which I do not think the other Deuce kits had were stock taillights and cowl lights. 1 Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted March 29 Share Posted March 29 2 hours ago, stavanzer said: It will be very interesting to see what wheels, ect, Revell puts in the box for this version of the Sedan kit! I know my stash needs a couple of these. If it has the same old small block ford hopefully it has some nicer accessory parts. Quote Link to comment Share on other sites More sharing options...
stavanzer Posted March 29 Share Posted March 29 13 hours ago, Bullybeef said: If it has the same old small block ford hopefully it has some nicer accessory parts. I think that the 5.0 Litre H.O. Ford engine will be exactly as it was, the last time the kit was out. 1 Quote Link to comment Share on other sites More sharing options...
Can-Con Posted March 29 Share Posted March 29 The 5 window has some optional parts for the 5.0 though. 2 Quote Link to comment Share on other sites More sharing options...
stavanzer Posted March 29 Share Posted March 29 So Does the Dan Fink kit. 1 Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted March 29 Share Posted March 29 This was my favorite of the Revell '32 (1996 tool chassis). I always wondered why they slept on it so long but it looks like I'll be able to forgive them for that here shortly. 🤣 1 Quote Link to comment Share on other sites More sharing options...
CabDriver Posted April 9 Author Share Posted April 9 This will be available in the next “month or two” according to whoever it was at Revell who appeared in someone’s show coverage video this weekend… (I realize that’s a little vague but I forgot where I saw that little tidbit…apologies) 1 Quote Link to comment Share on other sites More sharing options...
stavanzer Posted April 11 Share Posted April 11 Looking at HPI Guy's video of the Revell kits he has, the Tudor Sedan box was shown. The Box clearly shows 2 wheel options. The Mags on the top, and the Wire Wheels also. No Steelies are shown, so they may not be in the kit. I want one of these kits! now, if they'd bring the Roadster back. Quote Link to comment Share on other sites More sharing options...
Can-Con Posted April 11 Share Posted April 11 6 hours ago, stavanzer said: Looking at HPI Guy's video of the Revell kits he has, the Tudor Sedan box was shown. The Box clearly shows 2 wheel options. The Mags on the top, and the Wire Wheels also. No Steelies are shown, so they may not be in the kit. I want one of these kits! now, if they'd bring the Roadster back. The steelies were in the 5 window kit. 1 Quote Link to comment Share on other sites More sharing options...
Mr. Metallic Posted April 12 Share Posted April 12 (edited) On 4/10/2024 at 11:03 PM, stavanzer said: Looking at HPI Guy's video of the Revell kits he has, the Tudor Sedan box was shown. The Box clearly shows 2 wheel options. The Mags on the top, and the Wire Wheels also. No Steelies are shown, so they may not be in the kit. I want one of these kits! now, if they'd bring the Roadster back. Swiped this from Megahobby to add a little more info to the conversation. 1- Looks like it's the slotted wheels from the original 96 tool roadster. This is the first appearance outside of the roadster reissues to have those wheels. 2- Wire wheels as well, which were in the initial issue of the Tudor. 3- Drag City Casting just happens to have a Fordor and a chopped Tudor body available right now. @krassandbernie 4- stavanzer, I'm not sure if we will ever see the 96 tool roadster again. The story behind what became the Rat Roaster project was that the 96 roadster tool was so tired that Revell was going to have to invest in making a new tool, so they took the opportunity to make something a little different from the 96 version. @tim boyd could maybe confirm? Edited April 12 by Mr. Metallic 1 Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted April 12 Share Posted April 12 (edited) This mistake is on Revell I know, but I wouldn't call those wheels Kidney Beans. This is a Kidney Bean wheel. The Sedan appears to have Halibrand Sprint or C10 wheels. Edited April 12 by Dave Darby Quote Link to comment Share on other sites More sharing options...
niteowl7710 Posted April 12 Share Posted April 12 22 minutes ago, Mr. Metallic said: Swiped this from Megahobby to add a little more info to the conversation. 1- Looks like it's the slotted wheels from the original 96 tool roadster. This is the first appearance outside of the roadster reissues to have those wheels. 2- Wire wheels as well, which were in the initial issue of the Tudor. 3- Drag City Casting just happens to have a Fordor and a chopped Tudor body available right now. @krassandbernie 4- stavanzer, I'm not sure if we will ever see the 96 tool roadster again. The story behind what became the Rat Roaster project was that the 96 roadster tool was so tired that Revell was going to have to invest in making a new tool, so they took the opportunity to make something a little different from the 96 version. @tim boyd could maybe confirm? The 32 Roadster was reissued in 2005, which is also the last time the 3 Window kit was done last. The tooling wasn't "tired", there just wasn't any more room on the inserts for any more parts, so a new tool was required to do the Rat Roaster. The base 1996 '32 Ford 3 Window kit had begot the 5 Window, the Roadster, this Tudor, and the Speedwagon. That's a LOT of engines/engine options to say nothing of the interiors and other parts. There's only so much square footage to a piece of tooling even with swapping out inserts. 1 Quote Link to comment Share on other sites More sharing options...
Mr. Metallic Posted April 12 Share Posted April 12 11 minutes ago, niteowl7710 said: The 32 Roadster was reissued in 2005, which is also the last time the 3 Window kit was done last. The tooling wasn't "tired", there just wasn't any more room on the inserts for any more parts, so a new tool was required to do the Rat Roaster. The base 1996 '32 Ford 3 Window kit had begot the 5 Window, the Roadster, this Tudor, and the Speedwagon. That's a LOT of engines/engine options to say nothing of the interiors and other parts. There's only so much square footage to a piece of tooling even with swapping out inserts. Thanks for the clarification. But it still stands that we probably won't see the 96 tool roadster again, especially while the NEW roadster /RR is in the catalog. Quote Link to comment Share on other sites More sharing options...
disconovaman Posted April 14 Share Posted April 14 Is the option to cover the side windows so it will look Dilerery-ish in the kit? Quote Link to comment Share on other sites More sharing options...
stavanzer Posted April 15 Share Posted April 15 5 hours ago, disconovaman said: Is the option to cover the side windows so it will look Dilerery-ish in the kit? I'm not sure.... I think the options (UN-Officially) are to paint the window glass, or carefully fill the window opening with sheet plastic. 1 Quote Link to comment Share on other sites More sharing options...
lucky 130 Posted April 15 Share Posted April 15 I hope everyone who wanted this re-issue, (including me) is happy with what they get, it will not be the quality , fit ,or finnish as others in the market. Just be glad to have this model back in our hands. Thank you Revell. 1 2 Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted April 15 Share Posted April 15 Oh, people will gripe whatever you do. My thought is, even if you have no interest in ,32 Tudors, there are still some nice parts for the kitbashers. I plan on getting at least one. Quote Link to comment Share on other sites More sharing options...
niteowl7710 Posted April 15 Share Posted April 15 2 hours ago, lucky 130 said: I hope everyone who wanted this re-issue, (including me) is happy with what they get, it will not be the quality , fit ,or finnish as others in the market. Just be glad to have this model back in our hands. Thank you Revell. What are you talking about? Other than the Rat Roaster (and the '32 Roadster they reissued based on it to "De-Stacy" it) and the '29/'30 Model A kits this would be one of the newest Hot Rod kits available. It came out originally in 2011 (then called a '32 Ford Sedan Street Rod) which is based of the 1996 new tool '32 Ford tooling. This isn't a reissue based on the old Orange Crate from the 1960s. 3 Quote Link to comment Share on other sites More sharing options...
blubaja Posted April 16 Share Posted April 16 23 hours ago, stavanzer said: I'm not sure.... I think the options (UN-Officially) are to paint the window glass, or carefully fill the window opening with sheet plastic. Pretty much Quote Link to comment Share on other sites More sharing options...
stavanzer Posted April 16 Share Posted April 16 2 hours ago, blubaja said: Pretty much Beautiful Rods, Blue! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.