89AKurt Posted May 12, 2019 Posted May 12, 2019 Some of you are way too tidy and organized! I'm usually good at not losing parts, despite the black hole an inch away on all sides. I'm using a homemade wood jig for the first time. I'm also using the hot-wire more, instead of a swap or blade.
Cool Hand Posted May 18, 2019 Posted May 18, 2019 Too many projects on the benches today/this weekend.
Lordmodelbuilder Posted May 19, 2019 Posted May 19, 2019 Couple Saturday work bench pics of my 36 Ford Roadster I was thrashing on last month.
Lordmodelbuilder Posted May 19, 2019 Posted May 19, 2019 (edited) Double post, please delete this one. Edited May 19, 2019 by Lordmodelbuilder
Lordmodelbuilder Posted July 28, 2019 Posted July 28, 2019 (edited) Some "repair" work bench Saturday pics from a while back. Edited July 28, 2019 by Lordmodelbuilder
Brandon17 Posted October 26, 2019 Posted October 26, 2019 Stumbled across this post and love it. Noticed no one has posted for awhile and wanted to keep it going . My bench is too clean cause I never have time to get to it. Really hoping I can get back at it later tonight.
redneckrigger Posted October 28, 2019 Posted October 28, 2019 These pics show only one build in progress, have about another ten going! And this is only a day after I neatened up a bit!
64SS350 Posted November 2, 2019 Posted November 2, 2019 Cleared it a bit, starting the second and third Stude builds
STYRENE-SURFER Posted November 5, 2019 Posted November 5, 2019 Well It's not Saturday, but here is my new hobby room and bench. Not completely organized yet, getting there. Haven't even used my spray booth in this space yet, or even worked out how to vent it so far. Did take it all apart and give it a good cleaning though. Due to the Flu and a Mid Century floor too ceiling lamp restoration, haven't been able to spend much time in it lately. There is a small project happening on that granite slab.?
426 pack Posted November 9, 2019 Posted November 9, 2019 Would you believe I just cleaned it up last week. 1
Modlbldr Posted December 29, 2019 Posted December 29, 2019 Tonight's bench session. Working again on the 57 wagon. Going to do some foil work and see if I can't scratchbuilt a vintage thermos for the front seat. Got my Gin and tonic handy. Later-
Sam I Am Posted December 29, 2019 Posted December 29, 2019 1 minute ago, Modlbldr said: Tonight's bench session. Working again on the 57 wagon. Going to do some foil work and see if I can't scratchbuilt a vintage thermos for the front seat. Got my Gin and tonic handy. Later- From the looks of your air cleaner this must not be your first gin and tonic. ?
Modlbldr Posted December 29, 2019 Posted December 29, 2019 That depends. Do you mean tonight or ever? Well, in all honesty, I guess the answer either way would be No. Later-
Belugawrx Posted January 11, 2020 Posted January 11, 2020 (edited) rain day Bench time !! trying to finish the fantasy Smokey Yunick trans am car (plan on getting this Under Glass.... today), and starting on stance for the Cannonball Cobra Have fun at the bench...Cheers Edited January 11, 2020 by Belugawrx
Misha Posted February 2, 2020 Posted February 2, 2020 Been busy with my Inca Goldbox build of a 49 Ford coupe by AMT. part of the getting it done thread... Cheers Misha
Paintandwrenches Posted June 20, 2020 Posted June 20, 2020 Bench is pretty clean right now on account of me being on call for the past month and working quite a bit. It's not good for hobbies but it's good for the paycheck I suppose. Nothing really being worked on but one lonely Eddie Hill dragster. I'm sort of taking liberties and having fun with it and not really worrying about authenticity on this one. My intention is to build a spray booth tomorrow that's going to sit over on the left side and then vent out the window.
eldiablo78 Posted June 21, 2020 Posted June 21, 2020 21 hours ago, Paintandwrenches said: Bench is pretty clean right now on account of me being on call for the past month and working quite a bit. It's not good for hobbies but it's good for the paycheck I suppose. Nothing really being worked on but one lonely Eddie Hill dragster. I'm sort of taking liberties and having fun with it and not really worrying about authenticity on this one. My intention is to build a spray booth tomorrow that's going to sit over on the left side and then vent out the window. Nice workbench dont ask about mine. 10 feet long but only a foot to build.
bandit1 Posted June 2, 2021 Posted June 2, 2021 No "Bench" for me really since i moved on Easter Sunday of all days. Will get back to having one soon hopefully. Until then Keep Modelin' on' wherever and whenever i can
Paul Payne Posted June 17, 2021 Posted June 17, 2021 They're taking over...... Looks almost normal as you enter- The workbench is pretty typical- But then you see it- It's taken over the floor! But- there is SOME order in chaos! Stash, and more stash- Built models- Part of the junk yard- A little reference material never hurts- That's all for now! Oops! Charlie, our boycat, A.K.A. Charlie Kool Kitty, practicing to be a hood ornament! 1
MeatMan Posted March 13, 2022 Posted March 13, 2022 (edited) A day late but I'm posting my "new" workshop and workbench. Still lots of organizing to do but I'm happy to finally have a single place to work. I'll be able to get back to my Club DeMer for the Cannonball Run now. Edited March 13, 2022 by MeatMan
Gary Chastain Posted March 13, 2022 Posted March 13, 2022 Early this winter I have finally completed (well mostly, need some trim work yet) a dedicated work space. This was an unfinished room above the garage with only a few sheets of plywood on the floor and one light and no heat. I built the desk from reclaimed cabinet parts and wood lying around. Just finished building/installing cabinets. Still more to do but a dedicated work space is so awesome. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now