lordairgtar Posted Wednesday at 09:30 PM Posted Wednesday at 09:30 PM 59 minutes ago, michelle said: i got this 66 t-bird promo in the mail today I might have the trim piece for your hood bulge laying around.
michelle Posted Wednesday at 09:39 PM Posted Wednesday at 09:39 PM 9 minutes ago, lordairgtar said: I might have the trim piece for your hood bulge laying around. cool thanks
oldcarfan Posted Thursday at 12:31 AM Posted Thursday at 12:31 AM 11 hours ago, Zen said: Cool looking Escort! How old is that kit? Not sure, but I think it came out in 1996. I love rally cars!
oldcarfan Posted Thursday at 12:38 AM Posted Thursday at 12:38 AM (edited) On 6/28/2025 at 8:21 AM, Pierre Rivard said: Developing a passion for LSR. Found these 4 Hawk/Testors sealed streamliner kits on eBay, CAD$80 for the lot including shipping from GB. These are very simple toys (rubber band powered) and sold as 1/32 but they are a good fit for 1/25 1950's style streamliners (see size comparison to Ferrari 275P). Essentially these are only body shells and absolutely everything underneath needs to be fabricated. My kind of project! I came across a few of these a while back and started planning a similar project. I did find that the body is a little shallow for a 1/24th engines to fit cleanly. I think a 1/25th flathead or similar should work nicely if that helps. If I ever remember where I put them, I want to put two together to make a longer version. I also found some 1 inch tall r/c aircraft wheels that looked about right. Can't remember the brand, but they were at Hobbytown and had machined aluminum centers. Edited Thursday at 12:40 AM by oldcarfan
1959scudetto Posted Thursday at 10:17 AM Posted Thursday at 10:17 AM 21 hours ago, Zen said: Cool looking Escort! How old is that kit? According to Scalemates, the model was first released in 1994, however this version (Repsol) was issued in 1996.
Pierre Rivard Posted Thursday at 12:32 PM Posted Thursday at 12:32 PM 11 hours ago, oldcarfan said: I came across a few of these a while back and started planning a similar project. I did find that the body is a little shallow for a 1/24th engines to fit cleanly. I think a 1/25th flathead or similar should work nicely if that helps. If I ever remember where I put them, I want to put two together to make a longer version. I also found some 1 inch tall r/c aircraft wheels that looked about right. Can't remember the brand, but they were at Hobbytown and had machined aluminum centers. Excellent info Gary, thanks. Indeed the body is a bit shallow, thinking of extending the lower body sides. Lots to think about, should be a fun project.
kelson Posted Friday at 06:29 PM Posted Friday at 06:29 PM My Birthday today...so i treated myself to a few things.🤠 3d printed 73'GTO 3d printed 73-75 duster/dart grilles. 9
FoMoCo66 Posted Friday at 07:12 PM Posted Friday at 07:12 PM (edited) Got some small medicine cups for mixing paints. Edited Friday at 07:12 PM by FoMoCo66 6
sfhess Posted Friday at 10:39 PM Posted Friday at 10:39 PM Burbank's House of Hobbies has been getting some cool old kits in so I indulged and picked up a couple more. Yesterday I picked up a 74 AMT Mustang II kit and a Hawk Monte Carlo. I wanted to get one of these since I was about ten. They also had the Moebius (formerly Galaxie) 40's Chevy kits so I picked up a Coupe kit. We had our club meeting last night and some guys brought some kits to sell. I acquired a Revell 67 GTX (Sox & Martin), Fujimi Ferrari Daytona, Moebius Golden Commandos AWB car and a couple other things. 1
fordf-100 Posted 20 hours ago Posted 20 hours ago My wife and I went to the Hartsville Ohio flea market yesterday and I found a couple things, really good prices on everything! 1960 Desoto from Johan, unbuilt and complete! Tommy Ivo dragster sealed inside 25th anniversary Vette sealed 32 Ford complete very slightly started AMT competition pack, just two Allison engines and the Hemi GMP 1/24 diecast Ryan Blaine’s sprint car and a built 63 Buick Riv, not bad but I think I’ll be posting this for trade. I got everything for $112! 4
JerseeJerry55 Posted 9 hours ago Posted 9 hours ago Picked these up at Michael’s today. $60 for all you see here. Not a bad haul. 3
meechum68 Posted 9 hours ago Posted 9 hours ago So went to my local hobby shop, had a nice chat with the owner. I get to support him until March 2026, so will look to spend something each payday there, be it supplies or a kit. So without further ado... I had the wife with me while I was out and about, and this haul was from today and I blew the budget so far out of the water, I only got a dirty look from the wife, but I didn't get murdered lol. I had plan on spending about 200ish, but was closer to 300 lol. 1
JerseeJerry55 Posted 6 hours ago Posted 6 hours ago 1 hour ago, Zippi said: Nice haul man. Thank you.
Mark C. Posted 6 hours ago Posted 6 hours ago 2 hours ago, Valvefloat said: Too bad Micheals here in Canada doesnt sell kits. They do in my area of Canada.
Radretireddad Posted 5 hours ago Posted 5 hours ago I needed a new chrome ink pen so I grabbed this one from Hobby Lobby only to discover that nowhere on it does it say Molotow. I haven’t tried it yet but everyone should just beware of the deceptively similar packaging and cheap price. The product quality could certainly be poorer. 1
Valvefloat Posted 4 hours ago Posted 4 hours ago 1 hour ago, Mark C. said: They do in my area of Canada. What area?
HomerS Posted 3 hours ago Posted 3 hours ago NFS.....the boxed promos were $25. The 69 Chevy has a cracked A-pillar and missing the rear pan below the bumper. Growing up, my dad had a 73 Impala, albeit a four door, as a company car. I think that was the car that hooked me on the full sized sedan 1
Mark C. Posted 1 hour ago Posted 1 hour ago 2 hours ago, Valvefloat said: What area? The maritimes. I haven’t been into a store for several months, but last time I got a Revell ‘70 Torino Cobra. After the 30% coupon was applied, the price was $28 Cdn, a steal at today’s prices. In checking their website, I just noticed they are not showing stock in any stores near me, so I hope that’s just temporary. Seems like a lot of supply chain issues since all this tariff nonsense started, so maybe it’s just that. Since I haven’t actually been in the stores to check the shelves, I can’t even say they don’t have them for sure. Websites aren’t always accurate, I’ve noticed. 1
slusher Posted 1 hour ago Posted 1 hour ago On 7/4/2025 at 1:29 PM, kelson said: My Birthday today...so i treated myself to a few things.🤠 3d printed 73'GTO 3d printed 73-75 duster/dart grilles. Curtis you always score the coolest kit! Where or who do you by the grills from buddy?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now