southpier Posted May 27, 2013 Share Posted May 27, 2013 ..... $1.39. About 10 minutes after it hit the shelf . . . 1958. For those too young to recognize what it is, it's an AMT 1958 3n1 model kit. A 1958 Buick hardtop, to be precise. was this a generic box with a sticker of the included car on the end panel? Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted May 27, 2013 Share Posted May 27, 2013 For helping me get to paint jobs where I'd like them to be, my airbrushes and a decent set of paint-brushes. Next up, Xuron sprue cutters- these work beautifully. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
ScaleDale Posted May 27, 2013 Share Posted May 27, 2013 Dremel Stylus, needle files, calipers and a calculator app. Just can't go by "Scale Dale" without the last two Dale Quote Link to comment Share on other sites More sharing options...
kitbash1 Posted May 28, 2013 Share Posted May 28, 2013 Three things 1) My Dremel tool with flex shaft 2) Badger 250 air-brush 3) Xuron cutters ( best things since sliced bread ) Quote Link to comment Share on other sites More sharing options...
Danno Posted May 28, 2013 Share Posted May 28, 2013 was this a generic box with a sticker of the included car on the end panel? Yes. Same box for all the hardtop kits issued in '58; different box for all the convertibles. There were white tape stickers on each end of each box that identified the specific car inside. Quote Link to comment Share on other sites More sharing options...
Q tip Posted May 28, 2013 Share Posted May 28, 2013 high speed internet, bi-focals and super glue debonder Quote Link to comment Share on other sites More sharing options...
lanesteele240 Posted May 28, 2013 Share Posted May 28, 2013 Building a modle room insid my house Quote Link to comment Share on other sites More sharing options...
Deathgoblin Posted May 28, 2013 Share Posted May 28, 2013 I gotta say my computer and internet connection. Without them, I'd never have gotten back into model cars. Quote Link to comment Share on other sites More sharing options...
doggie427 Posted May 28, 2013 Share Posted May 28, 2013 high speed internet, bi-focals and super glue debonder :lol: Quote Link to comment Share on other sites More sharing options...
Skip Posted May 28, 2013 Share Posted May 28, 2013 Dremel, bought my first one at a garage sale for $3 tossed in a set of brushes and it lasted me another 10 years! Have both the stylus and corded Dremels. I like the corded model better as I use the flex shaft with it gives me better control. Going to have to ditto on the bi-focals and optivisor! Quote Link to comment Share on other sites More sharing options...
lanesteele240 Posted May 28, 2013 Share Posted May 28, 2013 This is odd. I put 4-10 models together a year and have never felt the need to get the drimmel out. What are you guys using it for. Quote Link to comment Share on other sites More sharing options...
southpier Posted May 28, 2013 Share Posted May 28, 2013 ... Same box for all the hardtop kits issued in '58; different box for all the convertibles. There were white tape stickers on each end of each box .... s I g h . . . then I really am that old. thanks Quote Link to comment Share on other sites More sharing options...
Sixx Posted May 28, 2013 Share Posted May 28, 2013 All 7 of my Iwata airbrushes...and the GIANT Passhe,explosion-proof spray booth...I'm still recovering from that one!! LOL!!! Quote Link to comment Share on other sites More sharing options...
Nitro Neil Posted May 28, 2013 Share Posted May 28, 2013 My Geek Glasses... Quote Link to comment Share on other sites More sharing options...
Foxer Posted May 28, 2013 Share Posted May 28, 2013 This is odd. I put 4-10 models together a year and have never felt the need to get the drimmel out. What are you guys using it for. I use it mostly for removing plastic. I never build anything without cutting something up. My old corded one is in a holder so I can use it as a cheap lathe. Quote Link to comment Share on other sites More sharing options...
Gramps2u Posted May 28, 2013 Share Posted May 28, 2013 Exacto knife & #11 blades has made life much simpler. Quote Link to comment Share on other sites More sharing options...
Helix Posted May 28, 2013 Share Posted May 28, 2013 Building a modle room insid my house Absolutely Gary! Plus..... Xacto knife / Sprue cutters and the toothpick which is great for the tiny paint details Quote Link to comment Share on other sites More sharing options...
cartpix Posted May 28, 2013 Share Posted May 28, 2013 When I was about 12. I bought a dimmer switch & wired it up to my Dremel. This was before there were variable speed models. After that, in no particular order, good fine tip brushes, air brush, bare metal foil, & Xacto knives & razor saw. Jeff Quote Link to comment Share on other sites More sharing options...
ZTony8 Posted May 28, 2013 Share Posted May 28, 2013 Three things-two I bought,one was a gift..I bought a respirator for painting and an Optivisor so my old eyes can see the small parts.Almost 50 years ago now (Jeez!) my dad gave me a set of X-Acto knives in a wooden box.I still have and still use the set. Quote Link to comment Share on other sites More sharing options...
DanielG Posted May 28, 2013 Share Posted May 28, 2013 For me it has to be when I decided to open my shop and 'buy' all this stuff! Quote Link to comment Share on other sites More sharing options...
Draggon Posted May 29, 2013 Share Posted May 29, 2013 This AMT '58 Buick. I had been looking for one for years, but the prices were outrageous. This popped up on ebay, buy it now for $45 shipped. Absloutely pristine. The bare plastic shines, no glue spots, nothing broken. looks like the bumpers were replated and the windshield trim was hand painted silver. Quote Link to comment Share on other sites More sharing options...
kurth Posted May 29, 2013 Share Posted May 29, 2013 I would have to say it is my Badger Million-aire silent compressor. First time I could adjust pressure while airbrushing, which opened up a whole new world of control. Plus, I could airbrush anytime without causing a racket with noisy compressor. Quote Link to comment Share on other sites More sharing options...
58 Impala Posted May 29, 2013 Share Posted May 29, 2013 (edited) First would be my Optivisor w/No.3 lense (needed them after age 40+), next would be the No.5 lense for my Optivisor (needed a little stronger lense after age 50+) . Second wasn't a purchase, a good friend gave me a set of good Swiss needle files almost 30yrs ago. I use them on almost ever model, I have yet to find another set as good. Last would be my Dremel Stylus, very comfortable to use. Edited May 29, 2013 by 58 Impala Quote Link to comment Share on other sites More sharing options...
Jim Whalen Posted May 29, 2013 Share Posted May 29, 2013 Hi, Good thread and some excellent examples that'll help people with their building. For me, in the following categories, are: Tools - airbrush and compressor that you can adjust the pressure with Resources - magazines, Donn Yost's dvds and the internet connection (can't imagine life without it now) Accessories - opitvisor - vison is sure less flexible than it used to be! Going to shows and meeting people is also a great way to expand the hobby! Quote Link to comment Share on other sites More sharing options...
VERNON Posted May 29, 2013 Share Posted May 29, 2013 My best purchase was an original Monogran, Hotwheels Snake and Mongoose funny cars (open but MINT). I paid twenty each. The second best, is not a purchase, but joining this forum. I can't begin to count how many times the forum members have helped me out, with modeling information as well as how to get in touch with vendors. Hats off to this site and all the members Vernon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.