gtx6970

agreed 100%. Ive seen and even bought some really nice builds for far less than what he sells for. would love to have his customer base..

I have extras of the hemi headers.....might even have a couple extra intakes. Not aware of anyone copying the exhaust

Had a little bench time this morning ,,before going out to shovel snow. I have 2 pictures of the inside of this car, one shows a roll bar, one doesn't. So I decided to add one , also changed the pedals to reflect the 4 speed change. Also got the engine wired up with a MAD distributor. then did a test fit to make sure the headers clear the clear ( I think the headers are from the Revell 68 Charger kit ) . The molded in under hood wiring is just highlighted with a black sharpie, quick simple and easy . If I am lucky this one will be done by the end of the week

Yep, as far as I know the Color Me Gone kit was the only altered wheelbase charger produced. To be honest I think the chassis from the AMT 67 Cougar funnycar is pretty close. ( I have them both and could ck if wanted ) Problem is I am almost positive the interior tins are very unique to that kit

My bench is 4 ft from the ground.so my chair is a taller padded type with arm rests, it swivels and raises or lowers as needed . Next to my lighted magnifier, its the best investment I've made for modeling . I've sat there for probably 2 hours with no issues. Although getting once in a while is a good idea to just keep the circulation going in your feet and legs .plus grab parts, tools , paint, or refreshments.

Mail man dropped this one off Saturday. I honestly don't think the car has ever had any paint on it. and 2 very small glue marks where it had something glued to the top of the trunk lid ( in the flat area so it;ll be a super easy fix ) . Chrome is near mint ,,But I do need to find a hood ornament for it . This one will stay pretty close to the top of the to do pile,,maybe later his year. .

a convertible? say it isnt so . If I didn't already have a really nice one . I would be blowing your PM box up bout now.

Agreed, If anyone on this board could run with him its you. I see he had glass fit issues front and rear

wrong style cap for a max wedge car. pictured are 1969 thru about 1972 Dodge only

Its not.

FYI, the color me gone kit does NOT have the single headlight grille insert in it .

The air cleaners are in the Lindberg Color Me Gone 64 Dodge. The single headlight grille is in most of the others( not the CMG issue ) I have extras of both if you need them the hubcaps I'm not sure of ,,,you looked in the 64 Plymouth version ?

Scothorn Motors . About halfway between Hebron and Petersburg in northern Ky Was primarily a Chrysler Plymouth Desoto dealership . But they could get you any GM product brand new, no idea how they did it. But I've talked to multiple people over the years who they or there parents bought non Mopars new there. ( they didnt stock anything but Mopar ) Place closed back in the early eighties but I was there when the auction happend to buy nos parts and there was a lot of GM parts on the shelf . Its a bodyshop now.

WOW,,,,,especially the color. Love it. If you dont mind me asking. Whats it like to gets models. kits or supplies in Russia ? Do you have hobby shops or is everything mail order. Just curious as Hobby shops are rare around here these days ( only 2 in the area now ,,neither of which is heavily stocked in models. mostly either trains or RC stuff )

I know there are some out there in resin, But there is a set in the Revell Thunderbolt kit that's not bad ,,,,,,you just have to cut them apart as they are molded together

Not sure I could put ' Delightful ' and ' Tofu ' in the same sentence

Thanks , and yes they are Fred Cady decals . I bought them long ago to use on a Johan build that never happened. For some reason the pictures make them look yellowed ,,but in reality they are not ( or if they are its very very slight)

Ok , curiosity go the best of me Ramchargers Dodge - Hemi with the wide hemi hood scoop Mavericks Dodge - Hemi with the 2 lump max wedge hood scoop Color Me Gone Dodge - Max wedge with the 2 lump hood scoop Pettys 1964 Plymouth - Hemi - no hood scoop The Black 64 Plymouth - is the odd duck. it has a big block wedge with single 4 barrel AND the slant six ( didn't see a hood scoop in the box )

I think the Color Me Gone and the Maverick kits do. I know the Ramchargers is a hemi car. Don't remember about any of the others. I have them all if you need confirmation

Actually got to spend a few minutes at the model bench this week . And again concentrating of finishing some long stalled projects. This one is the 1964 Dave Strickler driven Bill Jenkins tuned Hemi Dodge. I had painted this car nearly 2 years ago,,,After multiple issues painting the hood multiple times , I got disgusted and put it away. Well that all changed when I found the can I used to paint it * its a duplicolor rattle can . So in the purple pond went the hood and I tried again, with much better results this time around. Sprayed the hood, (thankfully it now matches the car ). Dug out some parts box pieces to throw a crossram hemi 4 spd together . Plan is work on it the next few weeks to get another one off the bench and in the case. On this one I put some spacers under the leaf springs and I flipped the front spindles over and I really like the stance much better than the others I had built . , Just noticed I need to change the pedals to reflect the 4 speed change. Also, since these pics were taken I have since removed the vent window frames to reflect the actual car. Comments more than welcome. And thanks for looking.

Thems some nice figures

Sure looks a lot like the rags laying on my shop bench at the moment,,,grease stains and all ( I had to build a Mopar transmission for a customer of mine this week ) Edit, I saw a picture some time ago where the builder used this method to make a green tarp over a car. Using a paper towel with a green tinted glue /water mix. It looked EXACTLY like a tarp , texture and all .

The new Melrose Missle 65 Plymouth I assume ? My local hobby shop has them on order ,,,not aware of any special means to get them . If thats the kit in question

depending on what your after ,,,,,,some are considerably easier to find than others. Tried Ebay ?

Agreed http://www.modelcarsmag.com/forums/topic/109786-are-there-any-video-tutorials-on-making-masking-tape-vinyl-tops/#comment-1562700