70 Sting Posted April 18, 2022 Share Posted April 18, 2022 Good evening, I built Revell Germany's version of C7.R which differs mainly in the decals from the USA version. It was primed with Tamiya Fine Surface Grey and paint with Tamiya TS-16 Yellow then cleared with TS-13. I opened up the 2 air intakes in front of the rear wheels and side exhaust pipes. Also removed a section of plastic between the wiper and body. I'm 80% satisfied with this build - would have liked a smoother paint job and the silver decals behind the front wheels were placed a bit off on both sides along with the unwanted texture from the setting solution (see below). What I learned from this build: 1. The decals didn't like Tamiya's Mark Fit Strong solution as it added a bumpy texture and made the colour bleed a touch - in particular to the one on the hood. I switched to Micro Set & Sol which seemed to play nicer. I think I will keep the Tamiya product for Japanese kits. 2. I should have lightly sanded the colour and/or cleared the body before applying the decals. 3. Used Bob Smith's Insta-Set for the first time. Cool stuff! Needed it to speed-set the body to the chassis on both sides of the engine hood. 4. Used Scale Motorsport's carbon fibre decals for the first time on a couple engine parts. Nice product! Thanks for looking 🙂 5 Quote Link to comment Share on other sites More sharing options...
ea0863 Posted April 18, 2022 Share Posted April 18, 2022 There is no flippin way those pictures are of a model! It's not nice to take pictures of the real car and tell everyone you built it in scale 1 Quote Link to comment Share on other sites More sharing options...
Intmd8r Posted April 18, 2022 Share Posted April 18, 2022 Looks great! 1 Quote Link to comment Share on other sites More sharing options...
Just Jim Posted April 18, 2022 Share Posted April 18, 2022 Great pictures but where are the pics of the model? 😄 Just kidding looks fantastic! 1 Quote Link to comment Share on other sites More sharing options...
70 Sting Posted April 18, 2022 Author Share Posted April 18, 2022 @ea0863 @Just Jim Too funny. 😁 Quote Link to comment Share on other sites More sharing options...
Jim B Posted April 18, 2022 Share Posted April 18, 2022 Great looking Corvette. Well done. 1 Quote Link to comment Share on other sites More sharing options...
iBorg Posted April 18, 2022 Share Posted April 18, 2022 So where's the model? Absolutely great pics. 1 Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted April 18, 2022 Share Posted April 18, 2022 Oh yes, I like it a lot! The build comments are welcome too. 1 Quote Link to comment Share on other sites More sharing options...
Hi-Po Posted April 18, 2022 Share Posted April 18, 2022 Super nice!!! Job well done. 1 Quote Link to comment Share on other sites More sharing options...
Roger U Posted April 18, 2022 Share Posted April 18, 2022 Very realistic model and great photos. 1 Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted April 18, 2022 Share Posted April 18, 2022 Looks Harry, cool racer 'Vette....great job👌 1 Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted April 18, 2022 Share Posted April 18, 2022 Great job! And a beautiful build! Did you have any fitment issues with the dash when installing the body to the chassi? Read an other members build of the us kit and he had allot of problems with that area. 1 Quote Link to comment Share on other sites More sharing options...
espo Posted April 18, 2022 Share Posted April 18, 2022 This sure looks realistic to me. With a photoshopped background it would be imposable to tell from the real car. All of the finishes and the fine details look real. 1 Quote Link to comment Share on other sites More sharing options...
spencer1984 Posted April 18, 2022 Share Posted April 18, 2022 Excellent job on this! 1 Quote Link to comment Share on other sites More sharing options...
70 Sting Posted April 18, 2022 Author Share Posted April 18, 2022 1 hour ago, Mattilacken said: Did you have any fitment issues with the dash when installing the body to the chassi? Read an other members build of the us kit and he had allot of problems with that area. Thanks @Mattilacken. Yes. I thought it was something I did at first. Most of the glass in this kit gets pushed and snapped into place and holds very well including the rear and side windows. Where I had a problem was the two sides and windshield (even though all the glass is one piece) - they didn't want to fit tight against the body. This is where the Insta-Set I mentioned above came in handy. I had to push the side windows upward with a fair bit of pressure while applying the Insta-Set. I did this one side at a time and they held fast. <- I probably should have mentioned this in #3 of my original post. I can't say for sure that the dash played a part in the fitment issues. If you look closely at the the photos you can see that the engine hood does not sit perfectly flush all around, this might be due to the strain/torque I placed on the kit while speed glueing. 😐 Quote Link to comment Share on other sites More sharing options...
70 Sting Posted April 18, 2022 Author Share Posted April 18, 2022 @espo That lighting setup is the most forgiving way to shoot a car and it flatters the build. Quote Link to comment Share on other sites More sharing options...
Dragonhawk1066 Posted April 18, 2022 Share Posted April 18, 2022 Looks very well done to my eyes, nice work! I'm wanting that kit more and more! 1 Quote Link to comment Share on other sites More sharing options...
70 Sting Posted April 18, 2022 Author Share Posted April 18, 2022 @Dragonhawk1066 I enjoy scrolling through your album on Scalemates. 👌 Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted April 19, 2022 Share Posted April 19, 2022 Excellent build and so well photographed 1 Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted April 19, 2022 Share Posted April 19, 2022 Love the C7.R. I have built 2 of them. 1 Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted April 19, 2022 Share Posted April 19, 2022 Super nice Vette! 1 Quote Link to comment Share on other sites More sharing options...
happy grumpy Posted April 20, 2022 Share Posted April 20, 2022 Excellent build and photography. The decal work is awesome. 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted April 21, 2022 Share Posted April 21, 2022 Beautifully done! 1 Quote Link to comment Share on other sites More sharing options...
ChrisR Posted April 21, 2022 Share Posted April 21, 2022 Awesome! 1 Quote Link to comment Share on other sites More sharing options...
AMT68 Posted April 23, 2022 Share Posted April 23, 2022 Spectacular looking build. I do like those C7's. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.