stavanzer Posted June 20, 2022 Share Posted June 20, 2022 They probably got the axe in the early 1970's, as AMT was in trouble then. Look at the three Sand rail type Dune Buggies that were just detailed chassis with a couple extra parts added in. Desperate attempts to recycle old tooling without spending much (if any) tooling dollars. There was quite abit of that kind of thing going on then. I can see that some Promo Style Closed Hood Kits might have been scrapped just because they were not popular with many modelers then. Dennis Doty and Jim Keeler know much more about this than I do. I wish they would weigh in. Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted June 21, 2022 Share Posted June 21, 2022 10 hours ago, StevenGuthmiller said: Hmmm, that surprises me as apparently these molds weren't destroyed after their initial runs. I believe that the Flower Power kits were re-released in the early to mid 60s, so I assumed that possibly these molds might still be around and intact. But I suppose that there are many other factors that determine whether or not a mold has survived. Steve AMT did a mass scrapping of tools in the early to mid 1970s. Add to that some shrinkage from several transfers of ownership. As I understand it, even some tools created during the Ertl years are MIA. Quote Link to comment Share on other sites More sharing options...
pack rat Posted June 21, 2022 Share Posted June 21, 2022 (edited) 25 minutes ago, Dave Darby said: As I understand it, even some tools created during the Ertl years are MIA. The RC2 years weren't kind to the AMT/MPC brands or the tooling. Consider this when wondering why some 90's-era AMT/MPC kits haven't been reissued by Round2 Edited June 21, 2022 by pack rat Quote Link to comment Share on other sites More sharing options...
1972coronet Posted June 21, 2022 Share Posted June 21, 2022 6 minutes ago, pack rat said: The RC2 years weren't kind to the AMT/MPC brands or the tooling. Terrible era -- bland, uninspired box art; typos galore ( "1967 Pontica" , for an instance ); and oddball plastics. Thank god that Round2 came along and straightened out that Racing Chumps mess. Quote Link to comment Share on other sites More sharing options...
tim boyd Posted June 21, 2022 Share Posted June 21, 2022 11 hours ago, StevenGuthmiller said: Hmmm, that surprises me as apparently these molds weren't destroyed after their initial runs. I believe that the Flower Power kits were re-released in the early to mid 60s, so I assumed that possibly these molds might still be around and intact. But I suppose that there are many other factors that determine whether or not a mold has survived. Steve Steve....the "Flower Power" series (and several other "series" genres) were all reissued around 1968-69 (going from memory here, did not check definitive sources) and my understanding is that tooling for many of them were scrapped following those production runs. They were scrapped for both the value of the tooling raw materials as well as the tax write-offs, from what I was told my AMT insiders so many years ago. I covered a number of these AMT "reruns with fresh box art merchandising" offerings in an article called "AMT After the Trophy Series" (or something similar) in the mid 2000's in the other model magazine. Represented best available info on these kits at the time the article was written.... Best...TIM 1 Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 21, 2022 Share Posted June 21, 2022 9 minutes ago, tim boyd said: Steve....the "Flower Power" series (and several other "series" genres) were all reissued around 1968-69 (going from memory here, did not check definitive sources) and my understanding is that tooling for many of them were scrapped following those production runs. They were scrapped for both the value of the tooling raw materials as well as the tax write-offs, from what I was told my AMT insiders so many years ago. I covered a number of these AMT "reruns with fresh box art merchandising" offerings in an article called "AMT After the Trophy Series" (or something similar) in the mid 2000's in the other model magazine. Represented best available info on these kits at the time the article was written.... Best...TIM So sad. When this sort of definitive information arises, it becomes obvious that models like the ‘60 Mercury are gone forever. Nobody is ever going to spend the time, effort or money to create an all new tooling of such a car. 😞 Steve Quote Link to comment Share on other sites More sharing options...
RSchnell Posted June 21, 2022 Share Posted June 21, 2022 Just now, StevenGuthmiller said: So sad. When this sort of definitive information arises, it becomes obvious that models like the ‘60 Mercury are gone forever. Nobody is ever going to spend the time, effort or money to create an all new tooling of such a car. 😞 Steve I'd love to see the '62 Galaxie come back but sounds like it's gone too I still need a '62 Galaxie convert! Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 21, 2022 Share Posted June 21, 2022 27 minutes ago, RSchnell said: I'd love to see the '62 Galaxie come back but sounds like it's gone too I still need a '62 Galaxie convert! I have a good ‘62 convertible body that I might be convinced to let go. 😉 Unfortunately, I only have the body and hood. Steve Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted June 21, 2022 Share Posted June 21, 2022 Gotta wonder how some of those tools did survive - why was the '62 Buick saved and not the '62 Ford? Or the '61 Galaxie curbside and not the full detail convertible? Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted June 21, 2022 Share Posted June 21, 2022 51 minutes ago, ChrisBcritter said: Gotta wonder how some of those tools did survive - why was the '62 Buick saved and not the '62 Ford? Or the '61 Galaxie curbside and not the full detail convertible? True, and some kits like the 69 Lincolns, 68 Pontiac and Chevy just disappeared. End of the line tools, never to be seen again. Probably many more I don't remember. Quote Link to comment Share on other sites More sharing options...
Motor City Posted June 21, 2022 Share Posted June 21, 2022 23 hours ago, GMP440 said: Here is a link to the 68 Superbee show circuit car. http://justacarguy.blogspot.com/2017/02/convertible-super-bee-with-yellow.html That explains why the original Coronet R/T convertible kit indicated that it could be built as a Super Bee. I didn't go to the '68 Detroit Auto Show and was unaware of the show car until now. Thanks for posting this. Quote Link to comment Share on other sites More sharing options...
Carmak Posted June 21, 2022 Share Posted June 21, 2022 Although I understand a lot of tooling was scrapped I know suspect there is still some undiscovered stuff. I have a sample shot of the 66 Thunderbird Craftsman that was run in the early 2000's. The tooling was not labeled correctly. I cant find any pics of it right now. When I do I create a new post. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 21, 2022 Share Posted June 21, 2022 Here’s another one that “could” be around in some form. Went from the annual, to this re-pop, and then finally to the stocker. Possibility that there could be enough of this one left to still do something with? I suppose the first question would be, is there any interest? Steve Quote Link to comment Share on other sites More sharing options...
Classicgas Posted June 21, 2022 Share Posted June 21, 2022 Yep. Quote Link to comment Share on other sites More sharing options...
Motor City Posted June 22, 2022 Share Posted June 22, 2022 2 hours ago, StevenGuthmiller said: Here’s another one that “could” be around in some form. Went from the annual, to this re-pop, and then finally to the stocker. Possibility that there could be enough of this one left to still do something with? I suppose the first question would be, is there any interest? Steve As I've mentioned in a few posts, if enough of the original tooling survives (chassis, glass, engine), this could get a new body and interior, then converted into a '66 Dynamic or Delta 88. Another option would be to create a '65 Jetstar 1 or '65 and '66 Starfire with new bodies and interiors and use the '65 GP glass. Quote Link to comment Share on other sites More sharing options...
drodg Posted June 22, 2022 Share Posted June 22, 2022 15 hours ago, StevenGuthmiller said: Here’s another one that “could” be around in some form. Went from the annual, to this re-pop, and then finally to the stocker. Possibility that there could be enough of this one left to still do something with? I suppose the first question would be, is there any interest? Have to say I have never seen that kit. Btw there is one on Ebay now. I think 245.00 Steve Quote Link to comment Share on other sites More sharing options...
drodg Posted June 22, 2022 Share Posted June 22, 2022 I think I somehow Steven I edited your post just wanting to say I have never seen that kit before and there is one on Ebay. Quote Link to comment Share on other sites More sharing options...
Bob Ellis Posted June 22, 2022 Share Posted June 22, 2022 On 6/10/2022 at 8:01 PM, stavanzer said: Here is what is in the MPC Mission Impossible Kit. Truthfully, Not Much. https://public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/mpc-instructions/tv--movie/mpc-1969-coronet-co/ Hood Scoop, Two Seater Cover. This is true but I made a really nice stock Coronet R/T out of it. Quote Link to comment Share on other sites More sharing options...
Bob Ellis Posted June 22, 2022 Share Posted June 22, 2022 On 5/27/2022 at 9:30 PM, gtx6970 said: In case anyone wants one NOW, It can be yours https://www.ebay.com/itm/134068408956?hash=item1f3719927c:g:GmoAAOSwNd1iQmP~ I will buy a $60,000 bitcoin before I but that kit! Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted June 22, 2022 Share Posted June 22, 2022 21 hours ago, StevenGuthmiller said: Here’s another one that “could” be around in some form. Went from the annual, to this re-pop, and then finally to the stocker. Possibility that there could be enough of this one left to still do something with? I suppose the first question would be, is there any interest? Steve Problem is, all the tooling that was used to make this version were "touched" to make the stocker. Body, chassis, interior shell, front and rear bumpers. So, unlike the Olds conv. there isn't much left of the original tool. Same with the Buick Skylark. However, I think there would be a justifiable selling market for the Buick, not so much for the Delta 88. Quote Link to comment Share on other sites More sharing options...
Snake45 Posted June 22, 2022 Share Posted June 22, 2022 At this month's toy show, one of my favorite vendors had an AM radio version of the '65 Olds I'd never seen before. Asking price was $80, which I didn't think was outrageous, and I'm sure he'd have knocked $10 or more off for me. But it had one broken/missing A-pillar, which was pretty much a deal-killer for me. (I'd have had to think about it for $20, though, or even $30.) Quote Link to comment Share on other sites More sharing options...
Motor City Posted June 22, 2022 Share Posted June 22, 2022 I have the Dynamic 88 radio, which was made by Philco, then a Ford subsidiary. Most don't work well if at all. AMT made different models of the radio from 1964-1969. The Thunderbird is the only model that was made into a radio each of these years. As Patrick stated, there can be a business case for '66 and '67 GS models even if the '66 tooling is no longer viable to use. If the '65 Dynamic 88 tooling is too far gone to use, there might be a slim business case if Round2 makes the Starfire or Jetstar 1, but most of the younger modelers wouldn't even know what these cars are. Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted June 22, 2022 Share Posted June 22, 2022 53 minutes ago, Motor City said: I have the Dynamic 88 radio, which was made by Philco, then a Ford subsidiary. Most don't work well if at all. AMT made different models of the radio from 1964-1969. The Thunderbird is the only model that was made into a radio each of these years. As Patrick stated, there can be a business case for '66 and '67 GS models even if the '66 tooling is no longer viable to use. If the '65 Dynamic 88 tooling is too far gone to use, there might be a slim business case if Round2 makes the Starfire or Jetstar 1, but most of the younger modelers wouldn't even know what these cars are. Then again slap a certain soda carrier with the red and white swirl on it and anything becomes marketable. Include a vending machine and I'm in! 1 Quote Link to comment Share on other sites More sharing options...
keyser Posted June 22, 2022 Share Posted June 22, 2022 There was a 65 88 Olds convertible promo, boot, all of it. Might be around, though unlikely. I’ve one and the coupe. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 23, 2022 Share Posted June 23, 2022 I'll throw this one out there as well to see what you all think. AMT didn't do a '63, and the '65 was a completely different body style, so it was definitely a "dead end" kit. Do you suppose this one might still be lurking in a dark corner somewhere waiting for another moment in the sun? Steve 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.