Brett Barrow Posted November 14, 2015 Share Posted November 14, 2015 Yep, my bad, I misread the post, I thought he meant the engine. Quote Link to comment Share on other sites More sharing options...
Toner283 Posted November 14, 2015 Share Posted November 14, 2015 Yep, my bad, I misread the post, I thought he meant the engine. lol. Dang. I had my $300 already in an envelope just waiting for the address to send it to. Quote Link to comment Share on other sites More sharing options...
louie Posted November 15, 2015 Share Posted November 15, 2015 Brett. I know that it was just a simple mistake ( witch I do 10,000 times a day ) l was just kidding around and apologize. But I still wish that they would re-issue the chassis. I would buy a few . Thank you everyone. Jeff Quote Link to comment Share on other sites More sharing options...
peteski Posted November 17, 2015 Share Posted November 17, 2015 Life-Like was, and I believe still is, making styrofoam coolers.Well, almost. The full history is at https://en.wikipedia.org/wiki/Life-Like . Basically in 2005 the Styrofoam cooler division split out as Lifoam. Then Life-Like (the model trains company) was acquired by Wm. K. Walthers (a large model train distributor/manufacturer). Quote Link to comment Share on other sites More sharing options...
Casey Posted November 3, 2019 Share Posted November 3, 2019 https://www.velocetoday.com/exner-renwal-revival-cars/ Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted November 3, 2019 Share Posted November 3, 2019 I love this quote from the article: “Granted that American car design now ranges from acceptable to handsome, still, one of the ways our cars aren’t better than they used to be is that they all tend to look alike…anyone familiar with the individuality of so many of the great American cars of the past does notice – and cares.” This was written in 1963 Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted November 3, 2019 Share Posted November 3, 2019 Nice big images from the original Esquire article (the Packard was b&w for some reason): Only four cars were done for the article; note there are some differences between these and the final box art. Quote Link to comment Share on other sites More sharing options...
Brian Austin Posted November 3, 2019 Share Posted November 3, 2019 17 hours ago, Richard Bartrop said: I love this quote from the article: “Granted that American car design now ranges from acceptable to handsome, still, one of the ways our cars aren’t better than they used to be is that they all tend to look alike…anyone familiar with the individuality of so many of the great American cars of the past does notice – and cares.” This was written in 1963 Writers have made similar comments even in the '50s. Quote Link to comment Share on other sites More sharing options...
Cpt Tuttle Posted November 4, 2019 Share Posted November 4, 2019 Anyone noticing the resemblances between an early Valiant and the Raceabout? Quote Link to comment Share on other sites More sharing options...
Mike999 Posted November 4, 2019 Share Posted November 4, 2019 16 hours ago, Brian Austin said: Writers have made similar comments even in the '50s. George Steele: "What kind of a car?" Station Agent: "I couldn't say. I haven't been able to tell one car from another since 1924. They all look alike now, the way they make 'em." From the movie "Crack-Up," made in 1946. A pretty good film noir with Pat O'Brien and Claire Trevor. Turner Classic Movies shows it. I found a mostly built (and glue-bombed) Renwal Packard at a flea market a couple years ago, still in the original box. Notice the dark/light color separation line at the door. That's where the body is split on the model. It's a 2-piece body, upper and lower, molded in Dark and Light Green. The kit engine is a V-12 but looks way undersized IMO. I picked it up because it was fairly cheap and I have delusions of restoring it, some century. Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted November 4, 2019 Share Posted November 4, 2019 (edited) 6 hours ago, Cpt Tuttle said: Anyone noticing the resemblances between an early Valiant and the Raceabout? It's pretty obvious. The Duesenberg front hearkens back to the Imperial. The Exner style is nothing if not distinctive. You can also see similarities between the Mercer and the XNR It looks like the Esquire article happened sometime after Chrysler decided Virgil was getting too weird for them. Edited November 4, 2019 by Richard Bartrop Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted November 5, 2019 Share Posted November 5, 2019 Funny thing that as I was going through my odds and ends box the other day I came across the engine from a Renwal Packard that I built back when they were released. Anyway, the model I most want is the Exner Bugatti. Not a mint kit as too collectable these days, but an old or badly built one even with bits missing, that will probably never get built by the present owner that has been kicking around in their stash for many years. I would like to rebuild/restore this model to give to the Bugatti Trust Museum over here in the UK for permanent display. If anyone can help me in this venture please get in touch via the personal messaging on this forum. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted August 10, 2020 Share Posted August 10, 2020 On 10/1/2015 at 3:25 PM, Snake45 said: I built that Monogram TBF when it came out, about, what, 1962, 63? Worst modeling experience of my life to that point. It literally made me cry. Many, many years later, I tried it again. Had no particular problems with it. Discovered later that it's a bit undersized--more like 1/50 scale than 1/48. The even older Lindberg kit is true 1/48 (by my actual measurements). I'd still like to try that old Lindberg B-17, if I ever run across a cheap one. It's in an odd 1/64 scale but I think it would be cool to do anyway. The B-17 has been reissued by Lindberg and is currently available at Hobby Lobby Quote Link to comment Share on other sites More sharing options...
Snake45 Posted August 10, 2020 Share Posted August 10, 2020 1 hour ago, Greg Myers said: The B-17 has been reissued by Lindberg and is currently available at Hobby Lobby I bought one cheap at Ollie's a couple years ago. Haven't started it yet, but I'm looking forward to it. If it goes well, I might do all the Lindberg 1/64 bombers--B-58, He 111, Ju 88, there might have been another one that slips my mind at the moment. And then build the Revell 1/64 B-25, also recently reissued. Quote Link to comment Share on other sites More sharing options...
Kit Basher Posted August 11, 2020 Share Posted August 11, 2020 I built the Thomas Jefferson sub a year or two ago. Check out this box art. Quote Link to comment Share on other sites More sharing options...
RSchnell Posted August 11, 2020 Share Posted August 11, 2020 2 hours ago, Kit Basher said: I built the Thomas Jefferson sub a year or two ago. Check out this box art. That's one kit I've always wanted to build! Had the pleasure to see one of these nuclear subs in Port Canaveral once. No doubt going to the Navy Wharf there. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted August 11, 2020 Share Posted August 11, 2020 A little on the naughty side, if you check out the bulkhead ( wall, to you land lubbers) in the crew quarters, you'll find some "pinup posters" Quote Link to comment Share on other sites More sharing options...
Casey Posted January 16, 2021 Share Posted January 16, 2021 On 9/30/2015 at 1:07 AM, keyser said: Ive got a couple Pierces, but no color flip there I've seen. Just burgundy plastic. If anyone has seen a flip on a Pierce please let me know Don't think this is a flip, but in case anyone is looking, stumbled across this one: https://www.ebay.com/itm/Vintage-RENWAL-107-198-1966-Pierce-Arrow-66-Revival-series-1-25-Built-Rare/184623114161?hash=item2afc6527b1%3Ag%3A5NUAAOSwLEdgAkST&LH_BIN=1 Quote Link to comment Share on other sites More sharing options...
keyser Posted January 16, 2021 Share Posted January 16, 2021 Hey Casey. Nice built-up. Not a color flip, it seems they couldn’t find an acceptable split like the others. Really hoping these molds or even some were lurking. Fun kits, update wheels, clean up some details, and kitbash some, cool results. Quote Link to comment Share on other sites More sharing options...
vamach1 Posted January 16, 2021 Share Posted January 16, 2021 (edited) On 11/25/2013 at 12:41 PM, Greg Myers said: who was responsible for this one from Nichimo ? Old post but what the heck. Renwal did the 65 Mustang which Revell reissued and then made into the R&T GT350. Edited January 18, 2021 by vamach1 Quote Link to comment Share on other sites More sharing options...
Casey Posted January 16, 2021 Share Posted January 16, 2021 (edited) 18 hours ago, keyser said: Not a color flip, it seems they couldn’t find an acceptable split like the others. Yes, it looked like magenta on magenta to me, but figured someone might be interested, and they don't seem to pop up all that frequently. Those extended headlight housings, tho...? To each their own. *edit* Will we be seeing this one in the WDYGT topic in a few days??? Edited January 16, 2021 by Casey Quote Link to comment Share on other sites More sharing options...
lordairgtar Posted January 17, 2021 Share Posted January 17, 2021 7 hours ago, Casey said: Yes, it looked like magenta on magenta to me, but figured someone might be interested, and they don't seem to pop up all that frequently. Those extended headlight housings, tho...? To each their own. *edit* Will we be seeing this one in the WDYGT topic in a few days??? WDYGT? Quote Link to comment Share on other sites More sharing options...
keyser Posted January 17, 2021 Share Posted January 17, 2021 (edited) 9 hours ago, lordairgtar said: WDYGT? What Did You Get Today thread. Casey I’ve got enough of these things that the Pierce nose, Jordan fenders, a number of other issues getting corrected. Stutz, Mercer, Bugatti need little to be presentable. Bug mostly needs trim refinement to look like 1:1. Edited January 17, 2021 by keyser Quote Link to comment Share on other sites More sharing options...
lordairgtar Posted January 17, 2021 Share Posted January 17, 2021 1 hour ago, keyser said: What Did You Get Today thread. LOL Imma ijjit. Quote Link to comment Share on other sites More sharing options...
pack rat Posted January 17, 2021 Share Posted January 17, 2021 55 minutes ago, keyser said: Casey I’ve got enough of these things that the Pierce nose, Jordan fenders, a number of other issues getting corrected. Stutz, Mercer, Bugatti need little to be presentable. Bug mostly needs trim refinement to look like 1:1. I'm curious...what would you correct on the Jordan fenders? My issue with most of the Revivals are in their proportioning; they all look a little too long, high and narrow when compared to the beautiful Exner (or Exner-inspired) box art. The skinny 30's-era looking wheels don't help either. Having had the opportunity to add the whole series to my stash, I passed on the Duesenberg and the Packard because I couldn't get past their funky appearance. I restored the Jordan awhile back; I just did a wheel swap, mounted as low as possible without extensive mods, added a little bling to the front end with BMF and flat black paint then called it done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.