Mattilacken

Nice

Such a great diorama! and nice individual builds!

Epic!

Sweet build!

Nice project!

Nice work and nice detailíng!

Great model! Looks epic and if i hadent seen the last pic and knew it was a model I could hav been fooled that it was a 1:1!

Nice builds! I like this scale as well as the smaler ones

Som pics from today’s progress and with the BBS wheels. Here can be seen that the ride height up front needs to be adjusted.. and I would like to have posable steering. I sorted that on the race truck in one way, let’s see if I can fix that here as well. Body seems to ride high on the rear supports for the wing which results in quite big gap between diffuser and body. I think I need to upgrade the front brakes, they look to small in my eyes.

I have for a long time wanted to build one of these but I have not felt that I could, until now when I feel that I have enough skills. Started this kit a wile back and posted it under my Arctic garage thread, and yes I do have many kits going simultaneously. I bought this as a glue bomb, I striped the paint of many parts and got started on the chassi. The body was not touched gladly, and the reason why I bought it. I do have one more of an other release that I might build at some point. I have no transkit so it down to making my own version of grills and vents and such. 3d printer and cad skills might be involved along the way. I won’t make a replica per say since I really don’t like the wheels they ran and I am the one that will be watching it on the shelf so I will use something that I thinks suits it, either Tamika multi spoke wheels used on the DTM car which resemble what C5R had later, or I will be using an 3d modeled wheel that I have which is a BBS used by many but they are deeper than the c5r wheels. well on to the progress, I tried to thin out the body in many places to be able to look more in scale, but I went to hard in one spot on the hood, thought I had to do a nose transplant from the C5R Silverado body that is left over from before, but I managed to salvage this one. I then cribbed the hood out and I am now in the progress of filling the gaps a bit with CA and baking soda. I have opened up all vents in the front but decided to leave the sides of the front grill so I have them as support when making my mesh. Right now I working on relocating the filler since the LM cars have it on the LH side behind the drivers door. And only a mesh outlet in the back. I will also be making the later intake since I like the all carbon intake. That will also result in relocating the coils. Y i am trying to improve all the areas I just can’t stand on the revel body. The window frames toils have been 25mm thick if equal in 1:1. Also the air outlets are to small. As well as the lights are way of. Here are som comparisons.

Beautifull work on that body! and wheels suits it verry well! Functioning hood pins! thats super advanced! i bought the MR.hobby hood pins that looks the part but a bit easier to build.

Got some fresh pictures of the 1:1 from the curent owner. feels sad to se it in this shape.

Started separating the body parts and did some repairs of my work on thinning out the body panels which created warping. Seems sorted now.

I have had good luck with PrimaCreator water washable resin and yes its very little odor and easy to clean with wather and a wipe of with Isopropanol on the equipment befor next run.

Got me some suplies directly from China, 100pcs of #11 blade, 3 knifes, bunch of 1 mm magnets, brushes of various sorts to share with my other half and some cleaning stuff.

Great wheels and finishing ! What chrome did you use? Revell?

Made some work on the Camaro but combuter based. Made a fabricated 9inch rear end that should drop in nicley. Also I searched the registry for my old 1:1 and found it without engine and transmission in the south of the country. Sounded intact otherwise and i could get it super cheap rougly 1500USD. But then engine and transmission package is so expensive here, might be worth doing a blasphemy with a Mercedes v8 and manual in it which can be had for 2000k instead of 6000k.

Thanks! I will do my best Yes its fun, especialy that I can build it as i would like to build it. Thanks mate!

So I have had an idea to make a replica of the Camaro that I imported to Sweden from CA back in 2009. And this week I got hacking on it. I wanted to make at top as I had so I had purchased a ‘93 amt to kit bash to make the best ‘98 I could. I first started by hacking out the grill with a 10 blade so I can replicate my one that only had the uruthane bumper and a polished grill so the plastic grill insert had to go. next up was the t tops which meant hacking up both the ‘93 and the ‘98. Make a new reinforcement piece to replicate the 1:1. I decided to keep the revell windscreen due to the wipers on the amt was molded to the glass. I will be using the amt chassi and most part of the interior since it’s more accurate in my opinion with the sail panels and speakers.

Sweet build! looks just right!

Sweet build!

Nice build! Your body mods looks great and improves the look many times! I have a couple of 1/16 kits and seen some more, and I feel like they are just upscaled 1/25 or 1/24 kits with low detail overal. Some might be better but the ones i have all need allot of work to be worthy the scale difference to their smaller siblings. And over all allot of things have been simplifyed and might look toyish. I can not talk for the Chargers though since i have not seen these.

I have started to paint the engine and components.. looking mighty fine!

Nice build! One of the coolest 55’s! Nice work on that hinge and firewall.

Sounds like my cup of tea! My last OBS would definitely fit right in this category! And Dan, your plan sound much as my build recipe?