64SS350

Hobblinc order came today

I took a piece of rectangular brass tubing, cut it two or three times( left one leg intact), radiused to match molding and resoldered. Smoothed out the solder, then super glued(on the fender well opening) and clamped brass in place. Used a razor blade to 'scrape out material and rescribed lines. It helped to blacken door lines to gage your progress. Once satisfied, I just removed brass guide and flipped for other side of body.

'67 Bumblebee update. Removed side molding and carved in scale recess of the '67

Here's a quick update. Removed side molding and carved in scale recess for the '67

Love the Synergy Green!

Here's what I'm working towards Here's where I'm at

Fireball has some street strip slicks

Since I'm this far comitted, I sprayed some white Tamiya primer over it to see if it would smooth out. So far it did, now I need more paint..... Drat!

Beware of his castings, I bought a couple to check out his work, since they were going pretty cheap, boy are they ever!

Well I will be doing one or two for another CPB, but I could showcase them here also.

This is all lines where styrene came together in mold plus primer texture. No extensive body had to be done.

Yes, for several days.

This is what it looks like

Maybe I pulled a no no, but I never had a problem like this before. I used Dupli Color primer,(on two bodies) then shot Tamiya rattle can over it. Looked OK, until later, when primer and body (styrene) lines seem to rise up through paint. Bought a second can, tried on a spoon with primer, second coat went good. Reshot bodies, again later the same thing happened. Are these destined to be stripped??

Trying to finish the other two builds, so in between I started prepping parts of the Camaro. Cleaned up the body and chassis, drilled out the axle and spindles to accommodate the C1 tires. Here's the stance so far.

This is the number Ron provides for contact.. 814-337-4250

Thanks for all the replies, I have used the Model Master red and orange clears with good results. I will be trying the Tamiya as well now for a good comparison. Thanks again, Karl

Getting ready to do some clear taillights, calls for clear red and orange. What favorites do you all have or have gotten the best results from? Thanks,Karl

I am going to borrow 'Bumblebee' as he appeared in T4, he will transform later into his more modern form to throw off those pesky Highway Patrol. Since he runs off alien power, we won't have to stop for gas.

OK, decided to jump in here. Haven't been able to the last couple of years. I am working on a couple others, then onto the Cannonball! Here's my entries from years past.

Looks great!

Merry Christmas! I hope everyone has a wonderful day!

Got these yesterday, trade with DPNM and HLJ order came on same day!

Thanks for the input, I appreciate it. Karl

Overall quality of the kits. Looking at a Ferrari 512s kit.