Exotics_Builder Posted October 3, 2020 Share Posted October 3, 2020 This build combines a resin body with the Revell 1949 Mercury kit. It is being built as a traditional custom, which our club Guru defines as up to 1964. Thus, modern chassis, wheels, engine, etc. are Verboten. Although not really my area of interest, I decided to go for it since I had the pieces in the stash. The resin body (I believe from Morgan Automotive Detail) is very nicely molded. One would think, looking at it, that it is styrene, not resin. Given the look of the body, I decided to add accent trim to accentuate the shape. Using Evergreen half round, I shaped "spear point" ends and glued to the body. Since the roof is chopped, the interior is difficult to view. So I used a technique of spraying paint with granules used to simulate artifical stone. It gives a reasonable appearance of standard carpeting. I used Testors Extreme Lacquer Fiery Orange shot from the can, as my airbrush compressor is still in the moving box and yet to be set up. Followed by Wet Look, again from the can. In between, I added a couple of pinstripe decals from Gofer Decals. Allowing it to cure before polishing. I used Tamiya Wood Tan and Racing White for the interior followed by their semi-gloss clear. I dug into my diminishing stash of AMerican Satco wide whitewalls and coupled them with a wheel set I got from Fujimi 20+ years ago. I plan on using the cadillac engine in the kit, detailing it out. I do not plan on getting carried away on chassis/suspension detail. Quote Link to comment Share on other sites More sharing options...
Rocking Rodney Rat Posted October 4, 2020 Share Posted October 4, 2020 Looking good, Gerry -RRR Quote Link to comment Share on other sites More sharing options...
cobraman Posted October 4, 2020 Share Posted October 4, 2020 Cool project and great start. Quote Link to comment Share on other sites More sharing options...
espo Posted October 4, 2020 Share Posted October 4, 2020 Great looking build. Adding the moldings can really change the overall look after they're foiled. That is one of my favorite colors and I have to use restraint not to paint everything Fiery Orange. Your carpet treatment is also interesting since you even gives you some of the color texture you would see in a 1:1 car. Nice interior colors and they go well with the exterior. Quote Link to comment Share on other sites More sharing options...
BlackSheep214 Posted October 4, 2020 Share Posted October 4, 2020 Now that...is waaaaaay cool!!!! Quote Link to comment Share on other sites More sharing options...
slusher Posted October 5, 2020 Share Posted October 5, 2020 Awesome Mercury build you have going! Quote Link to comment Share on other sites More sharing options...
gman Posted October 6, 2020 Share Posted October 6, 2020 Love it (so far). I have one of the base kits in the stash that I was going to do somewhat custom (no chop, keep the wood, lowered ride height), and love the touches you've done on this resin body. I'll stay tuned for more. Quote Link to comment Share on other sites More sharing options...
carrucha Posted October 17, 2020 Share Posted October 17, 2020 Good progress so far. I look forward to seeing this one finished. Quote Link to comment Share on other sites More sharing options...
Mr. Metallic Posted October 20, 2020 Share Posted October 20, 2020 Anyone remember who made this body? I've been after one for years. Morgan Automotive Detail (or one of the other Detroit guys) made a chopped wagon body, but it was based on the woody kit. This is all steel. Tom Kren did a beautiful build with that body way back when, and now seeing Gerry's beautiful build it has reinvigorated my search. Quote Link to comment Share on other sites More sharing options...
Exotics_Builder Posted December 2, 2020 Author Share Posted December 2, 2020 Update - 12-01. Since I can''t edit title. I have the body initially polished and will wait until rear window creation and back shelf are finished before final polish and BMF for the chrome accent. The resin kit has templates for the rear side windows and shelf, but not rear window. I have clear styrene to make these and will create a template for the rear window. After these are cut and fitted, I will finish off the shelf and then, final polish on the body. For the shelf, I decided to do a tufted finish like the door panels and seats, rather than carpet. I was going to use Evergreen half round for it until I discovered that a HO scale corrugated roof sheet is close enough to the size to use that. Once the basic shelf is fitted, I will apply the corrugation to it and smooth it all out. Regarding the engine, I decided to be a bit flamboyant and did it in Metallic Gold along with some detailing. Simulated some linkage and fuel lines, wired the engine in correct firing order and added non-working dip sticks for engine oil and transmission. Also, the kit mufflers look like Cherry Bombs, so I painted accordingly. For the beehive filter, I drilled holes for the intake and output lines then drilled into Plastruct Styrene Hex Rod for fittings. Hope to get this one done by year-end, or soon thereafter. Quote Link to comment Share on other sites More sharing options...
slusher Posted December 2, 2020 Share Posted December 2, 2020 Nice work, Gerry! Quote Link to comment Share on other sites More sharing options...
Claude Thibodeau Posted December 2, 2020 Share Posted December 2, 2020 Hi Gerry! That's a beauty, bravo! CT Quote Link to comment Share on other sites More sharing options...
Exotics_Builder Posted December 2, 2020 Author Share Posted December 2, 2020 25 minutes ago, slusher said: Nice work, Gerry! 19 minutes ago, Claude Thibodeau said: Hi Gerry! That's a beauty, bravo! CT Thank you. Outside my normal build interests, but when I go after a model kit, I try to do the best I can Quote Link to comment Share on other sites More sharing options...
espo Posted December 2, 2020 Share Posted December 2, 2020 Glad to see you're getting back to this build. Quote Link to comment Share on other sites More sharing options...
Exotics_Builder Posted January 17, 2021 Author Share Posted January 17, 2021 Pulled this guy back out as to get the bodywork to a finished state. BMF is about half done. I think, in retrospect, the side body trim is too large. I was concerned that the dark color would "swallow" a smaller trim piece. Anyway, it is what it is and staying there. Quote Link to comment Share on other sites More sharing options...
slusher Posted January 17, 2021 Share Posted January 17, 2021 Looks very sharp! Quote Link to comment Share on other sites More sharing options...
Dave72 Posted January 17, 2021 Share Posted January 17, 2021 Very nice looking build! The paint looks amazing! I really like the way the interior tuned out with all of the tuck n roll panels and the neat idea with carpet. Great info as well on how you did it all. Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted January 17, 2021 Share Posted January 17, 2021 Very classy looking, I 'm a fan of Gofer decals myself and the American Satco WW look perfect on it. Quote Link to comment Share on other sites More sharing options...
espo Posted January 17, 2021 Share Posted January 17, 2021 Looks great, and as mentioned before I really like this color. Quote Link to comment Share on other sites More sharing options...
Sixties Sam Posted January 18, 2021 Share Posted January 18, 2021 On 1/16/2021 at 10:30 PM, Dave72 said: Very nice looking build! The paint looks amazing! I really like the way the interior tuned out with all of the tuck n roll panels and the neat idea with carpet. Great info as well on how you did it all. I agree! Excellent job on this model! Sam Quote Link to comment Share on other sites More sharing options...
Exotics_Builder Posted January 29, 2021 Author Share Posted January 29, 2021 Test fit on exhaust system. Anyone have an idea of where this is going? Quote Link to comment Share on other sites More sharing options...
beeRS Posted January 29, 2021 Share Posted January 29, 2021 Very nice! I love that Fiery Orange. Quote Link to comment Share on other sites More sharing options...
Rocking Rodney Rat Posted January 29, 2021 Share Posted January 29, 2021 13 hours ago, Exotics_Builder said: Test fit on exhaust system. Anyone have an idea of where this is going? Don't tailgate!!!! -RRR Quote Link to comment Share on other sites More sharing options...
Mr Randy Posted January 29, 2021 Share Posted January 29, 2021 13 hours ago, Exotics_Builder said: Test fit on exhaust system. Anyone have an idea of where this is going? Looks like flame throwers Quote Link to comment Share on other sites More sharing options...
Just Jim Posted January 29, 2021 Share Posted January 29, 2021 Your engine looks amazing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.