Speedpro Posted March 16 Share Posted March 16 This is a 4 week build I did to have something to put on the table at the final GSL. I had planned on a different powertrain but my idea just happen to be something another builder also had in mind(Mr Mark Weller). So i had to come up with another idea. Ended up building the roadster and kit bashing the Matt Hay pro street T-bird into it. This was rather challenging, being space limited, as the engine from the t-bird is no way just a drop in. But it is a ford. The engine and blower mounts were adapted to the frame and a trans mount was built and relocated. A dog house was built for the interior since more than half the engine was now in the passenger compartment. All the parts for the superchargers were thinned including the drive system trying to get as much room as I could. This really helped getting everything to fit. The front suspension was dropped a scale 5 inches or so by building a new crossmember mount so the radiator would remain in it's stock position. The front axle was also drilled and the drag link was modified to clear. At the rear, The four bar links from the t-bird were used and required new mounting points to the frame. The rear end was narrowed to pull the rear tires inboard to keep the same track width with the front. A drive shaft was also built. Tires came frome the parts box and the wheels were taken from th Bob Glidden Pro Stock kit. Brakes are drums all around. The bottom of the floor was smoothed by removing all the ribs. Then a exhaust system was built using the mufflers from the '66 nova ss kit and round tubing. The system was then alcad chromed. Alclad chrome, polished aluminum, and aluminum were used to finish all the parts for the engine and suspension along with the MCW Nassua Blue Metalic body color. The interior was done with light earth brown and the floor finished with embosing powder. The hurst quarter stick shifter and gauges were used from the t-bird. I added a little something to the front seat to give a little character. Was surprised I even got it done and is missing a few key components. Even so, It was a fun build. Thanks for looking. 18 Quote Link to comment Share on other sites More sharing options...
Steve H Posted March 16 Share Posted March 16 Really cool build Paul. I’m thinking the engine would have been tricky to get fitted in there… Those wheels from the Glidden kit are, IMHO the best wheels ever kitted. Shame they haven’t found their way into another kit. Love the colour choices you made, stance is aggressive, I like it! In the second photo, it looks poised to strike the tires and do a big ‘ol burnout. Cheers, Steve 1 Quote Link to comment Share on other sites More sharing options...
Kenmojr Posted March 16 Share Posted March 16 Incredible workmanship on this build. But I would hate to have to change spark plugs on this baby. Outstanding build... 1 Quote Link to comment Share on other sites More sharing options...
XYHARRY Posted March 17 Share Posted March 17 (edited) This is one beautiful Model A, your engineering on this is impressive. Well done Paul. Cheers, David. 😎👍 Edited March 17 by XYHARRY Spell check 1 Quote Link to comment Share on other sites More sharing options...
rrb124@sbcglobal.net Posted March 17 Share Posted March 17 Stance, color and awesome engine. 1 Quote Link to comment Share on other sites More sharing options...
rrb124@sbcglobal.net Posted March 17 Share Posted March 17 Have never seen a front mounted blower styled engine between the rails on a street rod. Unique! 1 Quote Link to comment Share on other sites More sharing options...
70 Sting Posted March 17 Share Posted March 17 That’s a very nice build. The engine and chassis are exceptional with realistic looking metal finishes. Did you do anything in particular to the chrome parts? Quote Link to comment Share on other sites More sharing options...
H.A.K Posted March 17 Share Posted March 17 Very nice, Clean build. 1 Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted March 17 Share Posted March 17 Awesome job on this. It looks great!😎 1 Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted March 17 Share Posted March 17 Extremely nice hot rod, well done! 1 Quote Link to comment Share on other sites More sharing options...
Jim B Posted March 17 Share Posted March 17 Nice looking Roadster. Really well done. 1 Quote Link to comment Share on other sites More sharing options...
David G. Posted March 17 Share Posted March 17 Fabulous work, museum quality! David G. 1 Quote Link to comment Share on other sites More sharing options...
Zippi Posted March 17 Share Posted March 17 Nice looking 29. That business end is rockin. 1 Quote Link to comment Share on other sites More sharing options...
LennyB Posted March 17 Share Posted March 17 Looks really nice, thanks for keeping it all Ford. But I don't think I would have enough legroom😆 1 Quote Link to comment Share on other sites More sharing options...
ChrisR Posted March 17 Share Posted March 17 Looks great!! 1 Quote Link to comment Share on other sites More sharing options...
Speedpro Posted March 17 Author Share Posted March 17 15 hours ago, Steve H said: Really cool build Paul. I’m thinking the engine would have been tricky to get fitted in there… Those wheels from the Glidden kit are, IMHO the best wheels ever kitted. Shame they haven’t found their way into another kit. Love the colour choices you made, stance is aggressive, I like it! In the second photo, it looks poised to strike the tires and do a big ‘ol burnout. Cheers, Steve Thanks Steve, The engine was a bit of a challenge. Getting the blower mount figured out was the hardest. Building the engine cover by far was the hardest part to build. The original plan was to stretch the body and frame to give more cabin space (leg room) but I only had 4 wks to get it done. Should have started sooner, my fault. I only have a couple sets of those glidden wheels and and am getting picky about where they are being used. This car just felt right. Still have a couple of the glidden kits in stock, But the shrink wrap is not coming off. 15 hours ago, Kenmojr said: Incredible workmanship on this build. But I would hate to have to change spark plugs on this baby. Outstanding build... Thanks Ken, I too believe it would be on the tough side to change plugs, but doable. 7 hours ago, XYHARRY said: This is one beautiful Model A, your engineering on this is impressive. Well done Paul. Cheers, David. 😎👍 Thank you David, The question when building a Model A anymore is "What can I do to separate this build from others?" It's allmost like reinventing the wheel. I think I gave myself some elbow room at least. 6 hours ago, 70 Sting said: That’s a very nice build. The engine and chassis are exceptional with realistic looking metal finishes. Did you do anything in particular to the chrome parts? Thanks Harry, All the chrome parts that were going to be used on the car were stripped and redone with Alclad Chrome, Polished Aluminum and Aluminum. The wheels are the only thing I left "Kit Chrome". 1 hour ago, LennyB said: Looks really nice, thanks for keeping it all Ford. But I don't think I would have enough legroom😆 Thanks len, This is something that was thought about. The original plan was to stretch the body and frame to give more leg room. Time was not on my side to get the car done to take to GSL. So ya, Its kinda "tight". 2 Quote Link to comment Share on other sites More sharing options...
Rattlecan Dan Posted March 17 Share Posted March 17 One of the best 29's I've ever seen. And there's a lot of nice one's out there. Really appreciating your cleanliness and engineering skills. 1 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted March 17 Share Posted March 17 WOW! Way kool, Brother! When I saw this debuted in Salt Lake at the GSL XXVIII I knew there was going to be several builders that wanted to know more about this amazing '29 A Roadster! Then seeing you surrounded by six or eight top modelers asking question after question, I knew you had made your presents known! Your style and execution are spot on and only gets better with every new model you build! Your eye for what it takes to finish your projects, as if they are the real thing, can only come from your years of experience building and restoring 1:1 museum automobilia. Now, in the scale world, so many others are learning from your experience and awesome tutelage! Always grateful for the having you as a friend and mentor, Brother. -KK 1 Quote Link to comment Share on other sites More sharing options...
Paul Payne Posted March 17 Share Posted March 17 Love everything about it! Outstanding engine engineering, super clean building, and great paint! 1 Quote Link to comment Share on other sites More sharing options...
Bainford Posted March 17 Share Posted March 17 Oh yeah, that's cool! Very nice work here. Good thing those Ford small blocks are tiny. Really digging this concept. Love it! 1 Quote Link to comment Share on other sites More sharing options...
espo Posted March 17 Share Posted March 17 Beautiful looking roadster enjoyed watching your build. Fitting the engine and drive line looked like 8 gal. going into a 5 gal. can. Paint and interior look great together as does the chassis. 1 Quote Link to comment Share on other sites More sharing options...
tim boyd Posted March 17 Share Posted March 17 This is so, so clean; a building style that just sings to me. Super job, Paul! And great to have met you at GSL, too. Cheers...TB 1 Quote Link to comment Share on other sites More sharing options...
karbuildr Posted March 17 Share Posted March 17 What an amazing piece of engineering. Beautiful paint finish, very attractive interior, I enjoyed reading all the mods and scratch building you accomplished. Outstanding. 1 Quote Link to comment Share on other sites More sharing options...
70 Sting Posted March 17 Share Posted March 17 Thanks for the reply. Can’t get over how well you did with the various metal paints. 💯👌 1 Quote Link to comment Share on other sites More sharing options...
Kah puts Posted March 18 Share Posted March 18 Excellent attention to the details, for a four week build it’s fantastic 👍 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.