espo Posted March 25 Share Posted March 25 1 hour ago, Ace-Garageguy said: Last two cans of Duplicolor DAP1688 light gray sandable primer within 20 miles, or maybe the known universe. Everybody's got the sealer, the high-build scratch filler, and other colors of straight "sandable", but not this stuff. I'm happy. EDIT: Funny thing is...nobody knew they had it. Not in the computers at any of the stores I went to, and it rang up as primer-sealer 1699 when I finally found it at O'reilly's, even though the cans are clearly marked otherwise. Sometimes, showing up in the flesh and actually looking on the shelves works better than trusting the infinite wisdom of the interdwerbs. Imagine that. Maybe the DAP1688 is discontinued, and the internal inventory control says that the DAP 1699 supersedes it so the stores inventory treats it as one in the same. AI at work. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted March 25 Share Posted March 25 22 minutes ago, espo said: Maybe the DAP1688 is discontinued, and the internal inventory control says that the DAP 1699 supersedes it so the stores inventory treats it as one in the same. AI at work. Well...no matter how good the inventory control software is, it's only as good as whoever enters data into it. It's not as though there's a robot with vision that can actually read what's printed on the label, and somewhere along the line, a human did something wrong, by failing to adequately distinguish between the two part numbers as entirely different products. GIGO rules. Quote Link to comment Share on other sites More sharing options...
ismaelg Posted March 25 Share Posted March 25 3 minutes ago, Ace-Garageguy said: GIGO rules. Amen brother! Truer words never been spoken! 1 Quote Link to comment Share on other sites More sharing options...
kelson Posted March 25 Share Posted March 25 Ebay arrival wasn't really looking for a Ranchero but it came up for a great deal!!,the two kits are Hobbyshop buys.🤠 5 Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted March 26 Share Posted March 26 3 hours ago, kelson said: Ebay arrival wasn't really looking for a Ranchero but it came up for a great deal!! Sounds like 50% of what's in my stash. Nice scores too. I didn't know that Yotyto BJ kit existed. Quote Link to comment Share on other sites More sharing options...
Mike C. Posted March 26 Share Posted March 26 Got my Revell LA Street Chopper. and also got this Grim Reaper modified bike that someone must have lost interest in. The scratchbuilt forks would look interesting on the LA Street chopper. Defiantly gonna be using those drag bars. 4 Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted March 26 Share Posted March 26 Picked this sealed kit up at a local flea market. The box was squashed on one side so I got a deal on it I think.🙂 Turns out that everything inside is OK.👍 1 Quote Link to comment Share on other sites More sharing options...
steveracer Posted March 27 Share Posted March 27 After a year waiting for more production of these wheels and gravel tires, they finally came in. Now I can finish my Audi Quattro S1 rally car….. kit came with slicks which don’t work on very wet gravel roads…. 2 Quote Link to comment Share on other sites More sharing options...
Horrorshow Posted March 28 Share Posted March 28 Technically it was Sunday, but I got Richard Petty’s Salvinos Charger, Petty’s Polar Lights 69 Torino and a mid 90’s Monogram Ted Musgrave T-Bird for 70 bucks at a hobby show, great prices for here in Canada. 3 Quote Link to comment Share on other sites More sharing options...
Bill Eh? Posted March 28 Share Posted March 28 32 minutes ago, Horrorshow said: Technically it was Sunday, but I got Richard Petty’s Salvinos Charger, Petty’s Polar Lights 69 Torino and a mid 90’s Monogram Ted Musgrave T-Bird for 70 bucks at a hobby show, great prices for here in Canada. David, it sounds like you found some great kits at Heritagecon. I have never built a NASCAR KIT, but did buy the Salvinos JR Joey Logano Mustang. 1 Quote Link to comment Share on other sites More sharing options...
ewetwo Posted March 29 Share Posted March 29 This arrived this morning. 1 Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted March 29 Share Posted March 29 3 hours ago, ewetwo said: This arrived this morning. That is a piece of history. Quote Link to comment Share on other sites More sharing options...
ewetwo Posted March 29 Share Posted March 29 11 minutes ago, Gramps46 said: That is a piece of history. I've wanted one for a while and finally scored one at a decent price. I'll have to be on the lookout for wheel backs because the ones that came with it are kind of funky. Quote Link to comment Share on other sites More sharing options...
catpack68 Posted March 29 Share Posted March 29 Picked this up cheap from a fellow modeler 2 Quote Link to comment Share on other sites More sharing options...
Mike C. Posted March 29 Share Posted March 29 My custom Grim Reaper Chopper arrived today. Looks like I going to be able to fit that scratch-built fork setup and drag bars onto the LA Street chopper with just a little sanding. Should look cool. Ebay seller did a really nice job on those forks. 1 Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted March 29 Share Posted March 29 My first pick-up kit. The stunning '59 El Camino! Hard to believe these were used for work on building sites and such! 2 Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted March 30 Share Posted March 30 Went to the LHS today and Finally got the '68 Coronet only one the shop had ,and found a good deal on the 1/16th Funny car . 3 Quote Link to comment Share on other sites More sharing options...
Engine 51 Posted March 30 Share Posted March 30 Finally pulled the trigger and ordered this spray booth. I got the optional 425 CFM motor. That option comes with a 5” discharge. I added an expander (5” to 6”) to make the duct 6” up and out thru the wall. I caulked the interior seams to seal it up a little better. It appears to be well made, looking forward to putting to work. Should be the last one I need to acquire. 2 Quote Link to comment Share on other sites More sharing options...
Dpate Posted March 30 Share Posted March 30 42 minutes ago, Engine 51 said: Finally pulled the trigger and ordered this spray booth. I got the optional 425 CFM motor. That option comes with a 5” discharge. I added an expander (5” to 6”) to make the duct 6” up and out thru the wall. I caulked the interior seams to seal it up a little better. It appears to be well made, looking forward to putting to work. Should be the last one I need to acquire. I didn’t think about caulking the inside of mine. Might get some clear n try it out, but you’re gonna love the booth. Quote Link to comment Share on other sites More sharing options...
ctruss53 Posted March 30 Share Posted March 30 I just ordered up a whole mess of World Rally Blue, and BBS Gold, from Splash paints. I have 3 different WRX Rally cars that I am going to attempt to build at the same time. 1 Quote Link to comment Share on other sites More sharing options...
Raoul Ross Posted March 30 Share Posted March 30 (edited) When I was a wee lad and Truax Field (Madison,WI) was an active Air Force base(early '60s), I remember jumping out of my skin when a 102 would fly over and create a sonic boom. Public uproar made short work of that but I always thought they were a cool lookin fighter. Years later I joined the ANG at Truax and was given the assignment of "Radio Operator Maintenence And Driver (ROMAD). This was just at the end of Vietnam. My job was to drive a Major (or above) with a jeep full of radios and be in visual contact with The Target, relaying the coordinates to the guys flying the Cessna O2-A/B as final control for air strikes. My Life Expectancy was 3 hours, the Major (or above) was <90 minutes. Sure glad I never had to go! Got to ride with them in the Skymaster a few times though, twas awesome! Anyway, I just happened to be on the Old Model Kits web site when both of these planes came up, I couldn't resist. The 102 has the added bonus of a decal sheet from the Wis ANG! Total Score! The Dart and the Lola I picked up during a recent visit to Des Moines and visited the only 2 LHSs in the area. Provimi Veal is a Wisconsin based producer of, um, veal and I got an autograph from Arie Luyendyk at Road America when he raced there in the 80s so it was kinda cool to pick it up.... and I've never owned a Mopar model of any kind and I always thought the '69 Dart was the best looking one. A lot of detailed parts in the kit. Edited March 30 by Raoul Ross 1 Quote Link to comment Share on other sites More sharing options...
ZTony8 Posted March 31 Share Posted March 31 Last Sunday at the Detroit show I got the '68 Coronet , the Moebius Resto mod Nova, the '68 G.T.O. Craftsman Plus, the Salvino '71 Road Runner, an Aoshima Infiniti kit with two different bodies, a Fujimi Lamborghini Veneno, and a Fujimi Enthusiast '76 Porsche Turbo. And I got a taillight for my Jo-Han '69 AMX. The windows for it are next. Quote Link to comment Share on other sites More sharing options...
HomerS Posted March 31 Share Posted March 31 (edited) AMC obsession continues...... 67 Ambassador SST promo.....missing a tailight Edited March 31 by HomerS 3 Quote Link to comment Share on other sites More sharing options...
HomerS Posted March 31 Share Posted March 31 52 minutes ago, ZTony8 said: And I got a taillight for my Jo-Han '69 AMX. The windows for it are next. Good luck in your quest. I made a trade for an AMX as Okey had them in his stock at shows.....until I needed one. Months later, I find an AMX rebuilder at a swap meet and it had two windows. Gracious seller let me buy one of them Quote Link to comment Share on other sites More sharing options...
Tabbysdaddy Posted March 31 Share Posted March 31 4 hours ago, ZTony8 said: Last Sunday at the Detroit show I got the '68 Coronet , the Moebius Resto mod Nova, the '68 G.T.O. Craftsman Plus, the Salvino '71 Road Runner, an Aoshima Infiniti kit with two different bodies, a Fujimi Lamborghini Veneno, and a Fujimi Enthusiast '76 Porsche Turbo. And I got a taillight for my Jo-Han '69 AMX. The windows for it are next. That's funny. I need a taillight for my AMX. Mine only has half. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.