NOBLNG

The external mix is one thing I like about the H. Cleaning it is easy, there are 3 parts that the paint can get to ( I have only used the little gravity feed cup, not the bottles yet) the cup, the needle and the nozzle. They are easily removed and separate from the AB itself. The needle seems to be far less prone to damage than the Iwata? The duel action brushes are really versatile and my Iwata Eclipse will do anything the Paasche H will and more, but right now I am enjoying the user-friendliness of the H. I have no experience with Badger. I would suggest watching some YT videos on each.

I got a start on the engine already. I can see from googling pics, that the upper rad hose connection is not correct but I think I will leave it as is. I will be wiring it though.

I'm starting on this one while things dry on my other projects. Has anyone done one of these? I searched and didn't find anything on here? It's not the greatest kit...part of the front fender wells and the frame are molded with the floor pan. The interior is a one-piece bucket with the center consol molded in place??? Oh well, I can't complain, I got it at the flea market for $2.00

The thing about an airbrush (compared to spray bombs) is that there is a lot less paint used, less overspray and fewer paint particles to get circulated around the house. That said, laquer or enamel paints will still irritate your wife. My wife is very sensitive to chemical smells also, so I do all my spraying out in the garage. She even notices the small bit of brush cleaner (mineral spirits) I use indoors. I have an Iwata Eclipse which I believe is similar to the Neo. It does a very nice job, but is a pain to clean thoroughly. FWIW, I recently bought a Paasche H and find it a lot easier to use and to clean. Good Luck!

Here's a little inspiration! I can't give you advice on what's good or bad, 'cause I've only built this one. Have Fun!

Getting a little more done on this one. Interior is done. Rims and tires painted. I found a tip on another website on how to do the lettering. Just rolling the side of the tip of this pen across the lettering worked amazingly well! Pardon the color scheme, nothing is factory on this one.

I just made this one today with a coat hanger and a chunk of 1x4 and have not used it yet. While sipping on a cold one to celebrate and marvel at my creation, I decided it needed some modifications to allow for better airflow in my new dehydrator. The holes also make it easier to hang onto!

I read somewhere on here about someone spraying into a funnel. Thank You whoever that was! The milk jug handle trick above would also work great I think.

I bought this dehydrator last year because it was on sale for a good price. I finally got around to modifying it to work for drying paint. I didn't want to hollow out all the plastic trays, as I might want to use it for making Doggy Treats also. I made a 4" spacer from 26 gage metal to raise the tray up away from the heat a bit. Then a 6" spacer for the main compartment. Edit: I changed the upper section to 8" tall. This way I can put a full size spray bomb in there to warm up. It is -30C here right now. I have 2 electric heaters going in the garage and they barely keep up!

Thanks. Yes, that chrome sprue on the right does not belong to this kit. I went through the instruction sheet and the only missing part was a front shock which I fabbed from a chunk of sprue . The hole behind the door is for the fuel filler cap. I did test fit body to fenders and it seemed to be OK.

I sprayed the fenders with a gloss black spray bomb. The body is Mission model sprayed through my new Paasche H. I have got to say that after only one use, I like it better than my Iwata Eclipse. It is so simple to use and super easy to clean! Love it!

I'm trying to get motivated by starting a few kits at once to see what peaks my interest. I bought this kit at a flea market last year. The PO had barely started it, and assembled 3 of 4 wheels backwards (thankfully not glued). The heads on the engine were glued on backwards, with the exhaust ports facing the intake manifold! It's not a super detailed kit, but what is there is cast fairly nice I think. I don't care for colored plastic much, just a coat of primer makes the car look so much better!

This is Model Master Stop Light Red Metallic on a slice of white styrene rod. I hollowed it out slightly and put a heavy droplet of paint in it. I think it would look great over top of chrome.

I hope you solved the problem David. I just picked one of these up yesterday and used it for the first time today. I REALLY LIKE IT! My only previous experience is with an Iwata Eclipse. Nice brush, but his Paasche H seems much easier to use and is a lot easier to clean! I like the consistent spray pattern once it is adjusted... no feathering the trigger to get the same amount of paint with each pass. I sprayed a few drops of laquer thinner through to clean it, then dumped in some Mission Model paint straight out of the bottle. It came with the #3 tip installed and I could likely have used the #5, as it kept stopping and I had to keep opening the paint nozzle a little more. After I thinned the paint lightly with Windex, it sprayed real nice at about 25psi.

White with black accents.

If you're not going to do your own work, why bother with the contest? Just go to the trophy shop and buy your own darn trophy to impress your friends!

He'd need a crane to load anything that needs a rack that big, unless it's in little pieces. He likely uses it as a shooting platform for hunting too.

Cameron Diaz

Beautiful job. Love the fuel lines!

dd?? dutifully detail? drastically detail?

Wouldn't the rear window cranks be removed in a cop car?

Yes, very nice job!

Yeah, she's likely sitting there wondering why no one has contacted her.

This seems to be my biggest enemy right now. Actually, I have battled it all my life, it's just that the older I get the more it seems to be a pressing issue. I never had too much of a problem with it at work because... well, things HAD to get done. I brought my '54 Willys into my garage to fix the rust on the drip rails which I figured would take me 3 weeks or so... and this is going on year 3 now of it sitting in the garage with no roof on it. I bought a few books on conquering procrastination but I haven't gotten around to reading them yet. Now that I am retired I should be able to get more things done...but then again, there's no rush, I'm retired!

Interesting car! 2speed powerglide I am assuming, but where was the shifter on these cars?