doorsovdoon Posted October 17, 2020 Share Posted October 17, 2020 I guess we could go back as far as horse and cart with the lanterns hanging off them, they were square! xD Quote Link to comment Share on other sites More sharing options...
RichCostello Posted October 17, 2020 Share Posted October 17, 2020 6 minutes ago, doorsovdoon said: I guess we could go back as far as horse and cart with the lanterns hanging off them, they were square! xD That would look better than most of the cars that have been posted. Although the 38 Graham is kind of cool. Quote Link to comment Share on other sites More sharing options...
Motor City Posted October 17, 2020 Share Posted October 17, 2020 13 hours ago, RichCostello said: Why has this thread gone from Revell releases to really UGLY cars with square headlights? Blame it on the custom Chevy van kit with the quad rectangular headlights. Apparently most of us found the headlight history lesson more interesting than the releases! ? Quote Link to comment Share on other sites More sharing options...
RichCostello Posted October 17, 2020 Share Posted October 17, 2020 4 hours ago, Motor City said: Blame it on the custom Chevy van kit with the quad rectangular headlights. Apparently most of us found the headlight history lesson more interesting than the releases! ? To each his own. Quote Link to comment Share on other sites More sharing options...
Brian Austin Posted October 19, 2020 Share Posted October 19, 2020 Non-round headlights are kind of interesting. American cars sporting CIBIE lights can be interesting. Square lights on a custom van are cool. Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted October 19, 2020 Share Posted October 19, 2020 As far as stock vans, I remember Dodge and Plymouth full size vans around 1979 into the early 80s had deluxe versions with quad stacked rectangular lights, and Ford, Chevy and GMC w/ single rectangular... Quote Link to comment Share on other sites More sharing options...
Snake45 Posted October 19, 2020 Share Posted October 19, 2020 1 hour ago, Brian Austin said: Non-round headlights are kind of interesting. American cars sporting CIBIE lights can be interesting. I got into model cars in 1966. Many of the AMT kits included the Cibie headlight as part of the custom options. I think maybe some MPCs as well. I think some of these headlights survive in reissues to this day. Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted October 20, 2020 Share Posted October 20, 2020 Yep - the Fireball 500 has them, too. (Another chrome headlight I should cast in clear.) As to the Ami, the export version (Canada?) looked like this: Quote Link to comment Share on other sites More sharing options...
Fabrux Posted October 21, 2020 Share Posted October 21, 2020 Well that's unfortunate. ?? Quote Link to comment Share on other sites More sharing options...
CabDriver Posted October 22, 2020 Share Posted October 22, 2020 Ohh, I’ve been wanting to build a Grumman LLV - that S10 kit will be helpful for that hopefully. Wrong engine though. Quote Link to comment Share on other sites More sharing options...
CabDriver Posted October 22, 2020 Share Posted October 22, 2020 On 10/16/2020 at 7:17 PM, Junkman said: America had a Nazi style headlight dictate imposed by their Central Soviet, aka "The Feds", in 1940 England would have been under “Nazi style” leadership in 1940 too if Churchill hadn’t asked FDR for help... Quote Link to comment Share on other sites More sharing options...
Jordan White Posted October 22, 2020 Share Posted October 22, 2020 8 hours ago, CabDriver said: Ohh, I’ve been wanting to build a Grumman LLV - that S10 kit will be helpful for that hopefully. Wrong engine though. Unfortunately not this version of the kit, it is basically the Syclone kit but with Chevy body parts and wheels. You would be better off finding one of the older releases that has the stock 2WD parts and engine parts, and then you'll have to find a GM 4-cylinder as well (I think someone pointed out an old Cavalier kit has one that is close). Quote Link to comment Share on other sites More sharing options...
Muncie Posted October 22, 2020 Share Posted October 22, 2020 Looks like the unofficial headlamp post - so here goes. So , let's give the 7" round sealed beam some love, too The 7" round sealed beam headlamp in the U.S. was not required by the Nazis or the Soviets, and not even the Feds... In 1940, there were no Federal requirements - each state had their own motor vehicle regulations. Thankfully, the state transportation departments worked together to standardize things or we could have had 48 different standards for manufacturers and motorists to comply with. The U.S Department of Transportation, National Highway Transportation Highway Safety Administration, and, the Federal Motor Vehicle Safety Standards all came about in the mid-1960's. The FMVSS apply to motor vehicle manufacturers so states still have their own requirements for vehicles on the road. Standardizing on a 7" sealed beam was an improvement over the previous headlamp technology. The reflector inside a non-sealed assembly could get dirty or rust/corrode, impairing the effectiveness of the lamp. Replacements lenses could be difficult to find for some of the smaller makes - imagine finding a lenses for a fifteen year old 1928 Hudson. The cost and availability of replacements was also a factor in the safety standards - headlamps don't work if you can't find or afford parts. The 7" round and 5-3/4" sealed beams were available everywhere at a very reasonable price - dealers, parts stores, hardware store, probably even some grocery stores. Quote Link to comment Share on other sites More sharing options...
CabDriver Posted October 23, 2020 Share Posted October 23, 2020 14 hours ago, Jordan White said: Unfortunately not this version of the kit, it is basically the Syclone kit but with Chevy body parts and wheels. You would be better off finding one of the older releases that has the stock 2WD parts and engine parts, and then you'll have to find a GM 4-cylinder as well (I think someone pointed out an old Cavalier kit has one that is close). Ahh bummer - thanks for the info though! I hadn’t really started researching this build properly so it’s good to find out about that now...appreciate it! Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted October 23, 2020 Share Posted October 23, 2020 20 hours ago, Muncie said: Looks like the unofficial headlamp post - so here goes. So , let's give the 7" round sealed beam some love, too The 7" round sealed beam headlamp in the U.S. was not required by the Nazis or the Soviets, and not even the Feds... In 1940, there were no Federal requirements - each state had their own motor vehicle regulations. Thankfully, the state transportation departments worked together to standardize things or we could have had 48 different standards for manufacturers and motorists to comply with. The U.S Department of Transportation, National Highway Transportation Highway Safety Administration, and, the Federal Motor Vehicle Safety Standards all came about in the mid-1960's. The FMVSS apply to motor vehicle manufacturers so states still have their own requirements for vehicles on the road. Standardizing on a 7" sealed beam was an improvement over the previous headlamp technology. The reflector inside a non-sealed assembly could get dirty or rust/corrode, impairing the effectiveness of the lamp. Replacements lenses could be difficult to find for some of the smaller makes - imagine finding a lenses for a fifteen year old 1928 Hudson. The cost and availability of replacements was also a factor in the safety standards - headlamps don't work if you can't find or afford parts. The 7" round and 5-3/4" sealed beams were available everywhere at a very reasonable price - dealers, parts stores, hardware store, probably even some grocery stores. Those definitely were the good old days. You could go to the store and not even need to look up the part number for your headlamp. And don't even get me started on how much LED taillights cost to replace. Quote Link to comment Share on other sites More sharing options...
mrm Posted October 24, 2020 Share Posted October 24, 2020 Where is the MODEL A COUPE? Well........that's all I had to say! Quote Link to comment Share on other sites More sharing options...
tim boyd Posted October 24, 2020 Share Posted October 24, 2020 11 hours ago, mrm said: Where is the MODEL A COUPE? Well........that's all I had to say! Last I heard it was tentatively planned for Q1 2021. Let's hope that is correct info, and that Revell sticks to that plan.....TIM Quote Link to comment Share on other sites More sharing options...
mrm Posted October 24, 2020 Share Posted October 24, 2020 53 minutes ago, tim boyd said: Last I heard it was tentatively planned for Q1 2021. Let's hope that is correct info, and that Revell sticks to that plan.....TIM Thanks Tim. Do you have any info, if of course you are at liberty to say, if once released, Revell plans on adding variations like they did with '32 series? Quote Link to comment Share on other sites More sharing options...
Luc Janssens Posted October 24, 2020 Share Posted October 24, 2020 (edited) 2 hours ago, mrm said: Thanks Tim. Do you have any info, if of course you are at liberty to say, if once released, Revell plans on adding variations like they did with '32 series? If one looks at the re-issue of the roadster kit, you'll notice it's a complete retool from the original 3D files, and if there are other planned variations made up from different parts from what has been released previously, they too needed to be retooled, but since I never heard Tim mentioning other variations, I doubt it. Edited October 24, 2020 by Luc Janssens Quote Link to comment Share on other sites More sharing options...
tim boyd Posted October 24, 2020 Share Posted October 24, 2020 8 hours ago, mrm said: Thanks Tim. Do you have any info, if of course you are at liberty to say, if once released, Revell plans on adding variations like they did with '32 series? Before the Hobbico debacle and whatever caused the production interruption, there were some very elemental discussions about other variations in the future. But my sense now is that such an action would be several years away, if at all. Especially given what has transpired since then. As for me, the '30A 5W coupe kit itself provides the basis for nearly endless kitbashing and body variations. Like you, I WANT to see that one back on the market, and as soon as humanly possible! TIM Quote Link to comment Share on other sites More sharing options...
CabDriver Posted October 24, 2020 Share Posted October 24, 2020 It’s been a while since we saw the 32 roadster too, I’d love to see that one back on the shelves. Not that it’s impossible to find, but it has been a while... Quote Link to comment Share on other sites More sharing options...
oldrevellfan Posted October 25, 2020 Share Posted October 25, 2020 for me I am waiting for the 30 coupe for so long (because it never come to europe!) and for a realease of the "Rat roaster" even with variation. I dream of a correct reissue of the 33/34 Monogram roadster Quote Link to comment Share on other sites More sharing options...
Luc Janssens Posted October 25, 2020 Share Posted October 25, 2020 (edited) 4 hours ago, oldrevellfan said: for me I am waiting for the 30 coupe for so long (because it never come to europe!) and for a realease of the "Rat roaster" even with variation. I dream of a correct reissue of the 33/34 Monogram roadster Sinse Revell Germany took over the European distribution for Revell-Monogram kits (somewhere in the late '80s), it became a story of hit and miss, sometimes you'll find them easy enough and sometimes you'll have to resort to parallel import or North American vendors. this past year was an exception tho, most likely due to the implosion of Hobbico, cuz suddenly Revell USA kits popped up at local hobby stores and reasonably cheap too (€20). My guess is, that because of the vacuum in the North American operations, all merchandise headed to the US was diverted to Revell's headquarters in Bünde Germany. But no worries, the Roadster has been re-popped, and don't see a reason why the coup can't follow...... Edited October 25, 2020 by Luc Janssens Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted October 25, 2020 Share Posted October 25, 2020 It says something about how badly the original mould were damaged that they had to redo them from scratch. It's also noteworthy that they thought it was worth doing them over again. Quote Link to comment Share on other sites More sharing options...
slusher Posted October 26, 2020 Share Posted October 26, 2020 As hot as molders are right now with the virus problems Revel could have cleaned up in sales if they released the 30 Coupe and the Rat Roadster Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.