Phildaupho Posted December 22, 2022 Posted December 22, 2022 (edited) This model is a tribute to the first full custom car in Vancouver BC. Jack Williams started work on the car in 1951, completing most of the modifications by 1953 in time for the first Vancouver custom car show. The size of the ’37 Cadillac V-12 prevented the hood from closing so the car was always seen hoodless until a flathead engine was later installed. Although not restored this car is still in remarkable and drivable condition. It has been owned and preserved by the same guy for fifty years !! BODY – AMT 1949 Ford 2-door coupe converted to a chopped 4-door. Replicas & Miniatures Buick side trim. Frenched headlights and taillights. 3-D Meteor grill from Maple-Leaf Modelworks. Smoothed bumpers with an over-rider on the rear through which the exhaust is routed. INTERIOR – Seats and door panels from Revell ’49 Merc. A custom steering wheel made from two Revell ’49 Merc units. ENGINE – 1937 Cadillac V-12 made by joining two Galaxie ’48 Chev 6-cylinder engines together connected to a ’49 Ford transmission CHASSIS – Kit ’49 Ford with lowering blocks out back and interior floor attached WHEELS & TIRES – Maybe Modelhaus Sombrero hubcaps with parts box wide white wall tires PAINT – Mr. Color Metallic Green darkened. Tamiya Pure White between the side trim. Mr. Hobby Clear Fortunately I did not glue the body to the chassis as I see by the photos the backseat has come loose. For my On the Bench thread Edited December 22, 2022 by Phildaupho 8
NOBLNG Posted December 22, 2022 Posted December 22, 2022 (edited) Beautiful work!? You have certainly done it justice.? Edited December 22, 2022 by NOBLNG
TransAmMike Posted December 22, 2022 Posted December 22, 2022 Well Phil, you sure nailed that replica!! Great job?
Joe Nunes Posted December 23, 2022 Posted December 23, 2022 Great looking model! Thanks for sharing the photos with us. Joe
Kah puts Posted December 23, 2022 Posted December 23, 2022 Fantastic representation of a fabulous looking custom ?
mr moto Posted December 23, 2022 Posted December 23, 2022 OMG!! That hits me in ALL the right places! Wonderful work that truly captures the right look. I think I've seen that car in an old magazine. I have to look through my collection and try to confirm that. Great looking build!
Steve H Posted December 23, 2022 Posted December 23, 2022 Hi Phil, I have not been on the forum much and totally missed the WIP on this, I will have a look later. Yet another great tribute/ replica build. You definitely have a knack for picking iconic cars and capturing them in scale. I love that green, my next build is likely going to be green, so I’ve been looking closely at anything green I see. Great build as always, keep ‘‘em coming sir! Cheers, Steve
speedy5963 Posted December 23, 2022 Posted December 23, 2022 Very nice build, came together very well!!
XYHARRY Posted December 23, 2022 Posted December 23, 2022 G'day Phil. I followed your wip and thoroughly enjoyed it. The Parts you used to build the V12 was ingenious. I look forward to your next project. Cheers, David. ??
TooOld Posted December 23, 2022 Posted December 23, 2022 Beautiful work , it looks awesome ! Love the paint finish and the Buick side trim .
Zippi Posted December 23, 2022 Posted December 23, 2022 Nice looking Shoebox Ford. I like the two tone. Great job.
Phildaupho Posted December 23, 2022 Author Posted December 23, 2022 17 hours ago, NOBLNG said: Beautiful work!? You have certainly done it justice.? 17 hours ago, TransAmMike said: Well Phil, you sure nailed that replica!! Great job? 16 hours ago, cobraman said: Looks fantastic ! 15 hours ago, Joe Nunes said: Great looking model! Thanks for sharing the photos with us. Joe 13 hours ago, Kah puts said: Fantastic representation of a fabulous looking custom ? 12 hours ago, mr moto said: OMG!! That hits me in ALL the right places! Wonderful work that truly captures the right look. I think I've seen that car in an old magazine. I have to look through my collection and try to confirm that. Great looking build! A friend sent me a scan from a early 1950's Hot Rod but not sure of exact date. This was before the Buick side trim was added. 12 hours ago, Steve H said: Hi Phil, I have not been on the forum much and totally missed the WIP on this, I will have a look later. Yet another great tribute/ replica build. You definitely have a knack for picking iconic cars and capturing them in scale. I love that green, my next build is likely going to be green, so I’ve been looking closely at anything green I see. Great build as always, keep ‘‘em coming sir! Cheers, Steve 10 hours ago, bondo bill said: Wow impressive build 7 hours ago, speedy5963 said: Very nice build, came together very well!! 5 hours ago, XYHARRY said: G'day Phil. I followed your wip and thoroughly enjoyed it. The Parts you used to build the V12 was ingenious. I look forward to your next project. Cheers, David. ?? 4 hours ago, ChrisR said: Looks great!! 4 hours ago, TooOld said: Beautiful work , it looks awesome ! Love the paint finish and the Buick side trim . 3 hours ago, Zippi said: Nice looking Shoebox Ford. I like the two tone. Great job. Thanks everyone. I really appreciate your comments. Jack Williams was a master bodyman and engine builder. I was inspired seeing a couple of his cars that have been restored at a Hot Rod Reunion last summer. Before building the 49 Ford I completed a model of his dragster. I could not resist taking a photo of the two together. 2
Phildaupho Posted December 24, 2022 Author Posted December 24, 2022 12 hours ago, slusher said: Absolutely gorgeous! 10 hours ago, spencer1984 said: Excellent work! 2 hours ago, PappyD340 said: Super nice build! Thanks guys. The car did not run a hood until the Cadillac V-12 was replaced with a flathead and was sold. It still has a hood but was louvered decades ago.
espo Posted December 24, 2022 Posted December 24, 2022 Amazing replica build. Liked watching the changes you did on the body to turn it into a chopped four door.
carrucha Posted December 24, 2022 Posted December 24, 2022 Good job on the replica. Nice to see a four-door custom.
Phildaupho Posted December 25, 2022 Author Posted December 25, 2022 12 hours ago, espo said: Amazing replica build. Liked watching the changes you did on the body to turn it into a chopped four door. 8 hours ago, carrucha said: Good job on the replica. Nice to see a four-door custom. Thanks guys. Merry Christmas to all.
Koellefornia Kid Posted December 25, 2022 Posted December 25, 2022 Turned out great, Phil! Very nice replica of the 1:1 car! Love the paint job and the two connected 6-cylinders! Beautiful build!
Claude Thibodeau Posted December 25, 2022 Posted December 25, 2022 Hi Phil! Wow, what a detailed tribute... Museum quality, for certain! The paint job and the execution of the rear doors are flawless. Bravo. Happy holidays to you! CT
m3fan Posted December 26, 2022 Posted December 26, 2022 Beautiful job Phil! Look forward to seeing it in person. Great representation of original and awesome paint finish Russ
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now