peteski

Funny, the club's logo was the 2nd thing I noticed in that photo (the car itself was 1st). No big deal - no need to feel sorry about it. It is not like we'll ban you from the forum. It is not a life-or-death mistake.

Good job!

I'm surprised than nobody mentioned the possibility of a typo yet. It was probably supposed to be $49.98 (or maybe even $499.89 - which is still unrealistic). The half off is probably just automatically triggered, so the seller is unaware. I see price typos happen on eBay from time to time. If the seller is contacted, they usually fix them. And again, we can thank the current eBay pricing structure for this. Back in the old days, when eBay charged a percentage of item's starting bid's price, this would have never happened when the seller saw what it would cost him to list that item! Remember those days when many auctions started at $0.01 or $0.99? That was why.

And for some silly trivia, "brat" means "brother" in Polish.

But you never lost the lid!

Looks good! Did you prep them in any way before sending them out, or did you send the bare resin pieces?

Isn't the logo in the upper left corner of that photo a hint?

I believe the $120k equipment you linked to is not what is used for "plating" styrene parts. Looking at the FAQ's from that website, I quote: Physical Vapor Deposition - also known as PVD Coating - refers to a variety of thin film deposition techniques where solid metal is vaporized in a high vacuum environment and deposited on electrically conductive materials as a pure metal or alloy coating. The vacuum deposition systems used by the model manufacturers (and 3rd party platers) do not require the materials to be electrically conductive. Our model parts are polystyrene and while they do apply clear glossy lacquer to those parts before the vacuum deposition process, I don't believe that the lacquer is conductive. But then again, I'm not an expert here - just a hobbyist who, like the saying goes, knows just enough to be dangerous.

Enamel paint used different chemistry than lacquer. Is there such a thing as "enamel-based" primer? I'm not talking about just some flat gray paint being used as primer, but a real primer designed to be a primer. I never heard of an enamel-based primer.

There was no mention if any decal setting solution was used. Those chemicals (often alcohol-based) can sometimes mar the paint surface and it will not wash off. But as far as the decal itself goes, it is all water-soluble, so any glue residue should come off with just more water. I also noticed that the paint onto which the decal was applied does not seem to be glossy, but more like satin finish. Water-slide decals should ideally be applied to glossy paint surface.

Weird! Maybe he was expecting cash? Or was that above and beyond the normal reimbursement you give him?

I thought that Barbie figures were closer to 1:12 scale.

I know that modelers generally call most clear plastic sheets "acetate", is it really acetate? Acetate (actually Cellulose Acetate) was one of early thermoplastics, and I don't think that it is actually used much in our hobbies anymore. Most clear plastic sheets are Polystyrene, PET, PETG, Acrylic (Plexiglas), or Polycarbonate (Lexan). I Acetate? Not so much.

So, you're leaving the old battleaxe behind? Nice! Hopefully the new pad has enough room for all your models.

What thickness was that? I think the 0.005" might have slight texture, but the thicker sheets should be perfectly clear. Another possibility is that instead of paper separator sheets they started adding a protective film over the sheet, which needs to be removed? It's been a while since I bought any Evergreen sheets.

Yes, I have replaced it once in the 30-odd years that I owned the airbrush. I did that when the needle could be reinserted into the airbrush with almost no resistance. But I don't recall if it pushes out through the front or the rear.

I have one pair of small tweezers with pointy tips where I slid some wire insulation stripped of a piece of cooper wire, and another pair where I slid some small diameter heat-shrink tubing, then shrunk the tubing with a heat gun. Both resulted in tweezers with soft tips

Yes, those files come in very handy. But for *REALLY* precise miniature work the best are reamers used by during root canal therapy. I had my share of those, and whenever I'm at the endodontist's office (for another root canal) I always tell them about my hobbies and as whether I could have couple of those tiny files they use during the procedure. They usually hav a a box with dozens of them (and many different sizes). They always let me have few of them (the unused ones of course). Those are the tiniest files I have ever seen.

I have been using the Blue Painter's tape in my modeling for years, and only the name brand stuff (no generics from the dollar store). It has a less aggressive adhesive than the regular tan-color masking tape. I use Tamiya tape for paint masking.

There is another Teflon seal where the needle enters the paint cavity. But being Teflon, it is solvent-safe.

Well, the license plates have white undercoat, and unless the other decals are applied to a white surface, ink jet or laser printed decals will not show colors correctly. Anything other than white will tint the colors on those decals. Doubling up will make them darker, but without an opaque white undercoat, they will still not look right. But to each his own.

I wish they would issue an electronic version, but I doubt that'll happen. There are some issues, but it is a good reference book.

Many of these Pyros were repopped by Life-Like in IIRC Historic Cars series. They are nice little kits. The show up on eBay often (or did last time I looked for them about 2 years ago).

Unfortunately it is not that simple. Ink Jet inks are translucent so the red and yellows will still need white undercoat. Unless you apply the decals to a white colored model.

That car has gorgeous lines - they sure don't make them like that anymore. it is pleasing to the eye and the hind quarters look muscular, like it is ready to go fast! When I was a kid I had a tethered-remote control one it was probably around 1/12 scale toy. It was orange. Actually it might have been my cousin's (but I just dreamed it was mine).