Dragonhawk1066

I went to the Ollie's in Flint, Mi. this morning. I got there at 9:06 AM (They open at 9 AM) and found 5 kits on their large display cubicle. The 2006 Camaro Concept, 2005 Chrysler 300, VW Scirocco, 97 Mustang GT, and the MPC snap '49 Merc Police Car. I grabbed one of the Police Cars to do the Stallone "Cobra" Merc. After walking around for a few minutes, and coming across a couple more gents looking for kits also, I headed to the checkout with my one paltry kit. While I was nearing the checkout I see one of the guys I saw by the display with two other women (All of them were about 30 years or younger) checking out with THREE CARTS FULL OF KITS, THE CARS STILL IN CASES, AND A BUNCH OF LOOSE TRUCK KITS. I didn't see everything in their carts, but I do know they had several Diamond REO Trucks, the '69 Chevelle Convertible, '69 GTX, '69 Hurst/Olds, '57 Ford, VW Scirocco, AMC Gremlin. There were a few more that I didn't get a good enough look at to see clearly. My estimate would be that they had close to 100 car kits and at least 20 Truck kits. As I was leaving they were still in the parking lot loading their booty into a pair of brand new Chevy Silverado Pickup's that probably go for 40-50K. I know all about first come first served and capitalism and all that, but sometimes these things just piss a person off. I envy some of you guys that can still get kits from Ollie's and Clearance kits and paints from Hobby Lobby up to a week after the sale starts, because around me, if you don't get there first, you're out of luck. I guarantee this rack was full when those folks started hoarding all of them!!

Maybe, but not really worth the hassle. I did get the request to go through without a receipt, so we'll see what happens. At worse, I'll just fill in the holes in the trunk and build it without the spoiler.

not sure if this is the right place to post this, but here goes. For those that have requested a missing part from Round 2, but don't still have the receipt, did you have to pay for Shipping and Handling. I'm missing a spoiler pedestal, part #71 from the AMT 1971 Plymouth Duster kit, but since I do not still have the receipt from my last September purchase, the request form states that there will be a S/H charge. Anybody else have this S/H issue? I have had to fill out a request 2 other times in the past, but happened to have the receipt for both purchases so there was no charge.

I'm definitely interested in seeing the before and after using these, especially with Future/Pledge.

Very nice work making this into a wagon! 1/4 mile stations wagons are cool!

Nice job! That is an attractive body style.

An excellent build and a nice color choice!!

Very nice work! I always did like that front end!

Thanks everyone! Much Appreciated!

Thanks Carl, I probably won't do too much, if anything, in WIP's on the Duster, but it looks like a really nice kit and I am looking forward to getting started on it.

I'm sure it's been mentioned in the comments already, I'm not going to read all of them, but the Maverick name seems to suit the truck more than the car anyways, lol.

That looks fantastic! Well done!

The Chevelle is done! Thanks everyone for following along! What a fantastic kit, as most of you probably already know from building your own. I'll take a few days to decompress and then get started on my next project, the AMT 1971 Plymouth Duster 340 that will be done as factory stock and in Model Master Go Mango with a white and black interior.

Here's my 1968 Chevelle that I just completed along with a little back story. The owner bought her back in 1997 before the prices of Muscle Cars started going crazy with the intention of doing a complete restoration. Life and other things got in the way so it sat until a few years ago when he finally had time and resources to get working on it. The goal was to have a "triple threat" vehicle that looks and runs like a winner. He wanted it to be right at home at the strip, on the streets as a cruiser, and on the show grounds. After 3 years (actually weeks, lol) he feels like he accomplished his goal. Oh yeah, never mind the boxes on the seat, he just got back from the auto parts store when he took the pics, lol. He kept the 396 badges on the car to keep up the "wolf in sheep's clothing" façade, lol. The owner also kept all of the original parts in case he ever wanted to put it back to factory stock. He pulled the original 396 and replaced it with a 454 bored up to 496 cubic inches (not really, but who can tell in 1/25 scale plastic, lol), and topped it off with an Edelbrock intake and a Holley Carb (from Fireball Modelworks). The air cleaner is a machined unit from Off The Sprue. The paint is Tamiya TS-11 Maroon and is cleared with Tamiya TS-13. The lower panels are painted in Tamiya TS-14 Black and the trim is done with BMF. The interior is done in Black craft paint with some satin varnish mixed in for a little sheen. A column mounted tach was added and a triple gauge pod on the console behind the shifter. The exhaust is custom made with scratch built mufflers and 3/8 inch styrene tubing for the pipes, and the headers came from the AMT '67 Chevelle Pro Street kit. The wheels are custom made deep dish Rally's in the rear and the kit rally's in the front, while the front tires are also from the kit and the rears from Fireball Modelworks. I added Battery Cables, ignition wires, heater hoses, valve stems and door locks for extra details. This is a fantastic kit and was a joy to build. Thanks for looking!

I had to call a last minute audible on the wheels, as the rears just wouldn't quite fit right inside the fenderwells. I tried shaving the wheel backs to no avail and the only solution was to grind away the inner fenderwells, which I was just unwilling to do at this stage. I also bent one of the rims while working on the fit, and couldn't get it back to a decent round shape. I had a minor conundrum as to which rims/tires to go with, Convo Pro's with skinnier slicks or steal the deep dish rims off my brown '69 Camaro and keep the drag radials. The wife preferred the rally's, so the conundrum was short-lived, lol. I painted and detailed a pair of the kit rally's for the front after these pics were taken and while they are molded a little differently than the rears, I can live with it. The lower left is the bent rim, which looked even worse in the tire. The paint also wrinkled while trying to fix it. I pretty much finished this one today, even with the wheel issue and hope to get some good outdoor pics tomorrow.

Very nice! I've always liked the Thunderbolts, for some reason they just look right in race form.

Nice job on the paint!

Well done! Great color choice!

Very nice! I like the color choice, would that be Testors Root Beer?

Very nice! That is a fine looking paint job!

Looking good so far! Great interior/exterior color choice as well.

I'm really hoping mine's OK, maybe I should open the envelope and test it. I have a love/hate with the stuff, it's a necessary evil, LOL, and like you I feel there's no suitable substitute. Sharpie's are OK for a small touch-up, Molotow can't be touched or handled. I have seen some great examples of the trim being taped off and Alclad airbrushed on, but I can't use that solvent based stuff in the house and am not set up to use an airbrush in my shed.

So does anybody know if the AMT '69 Daytona Postage Stamp Edition kit is essentially the same (meaning as crappy as) as the MPC '69 Daytona kit that was at Ollie's for $9.99 a couple of years ago? I'm assuming it's at least the same as the older box art versions.

Looks great! Brings back a lot of memories of my youth!

Nearing the finish line on this one. I got the rest of the wires and hoses hooked up in the engine compartment yesterday. I put the glass, visors and rear view mirror in this morning and mated the body to the chassis/interior this afternoon. I just have to add the wheels, a few trim decals and the bumpers and mirrors and she'll be done.